1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_LS102XA 11 12 #define CONFIG_ARMV7_PSCI 13 14 #define CONFIG_SYS_FSL_CLK 15 16 #define CONFIG_DISPLAY_CPUINFO 17 #define CONFIG_DISPLAY_BOARDINFO 18 19 #define CONFIG_SKIP_LOWLEVEL_INIT 20 #define CONFIG_BOARD_EARLY_INIT_F 21 #define CONFIG_DEEP_SLEEP 22 #ifdef CONFIG_DEEP_SLEEP 23 #define CONFIG_SILENT_CONSOLE 24 #endif 25 26 /* 27 * Size of malloc() pool 28 */ 29 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 30 31 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 32 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 33 34 /* 35 * USB 36 */ 37 38 /* 39 * EHCI Support - disbaled by default as 40 * there is no signal coming out of soc on 41 * this board for this controller. However, 42 * the silicon still has this controller, 43 * and anyone can use this controller by 44 * taking signals out on their board. 45 */ 46 47 /*#define CONFIG_HAS_FSL_DR_USB*/ 48 49 #ifdef CONFIG_HAS_FSL_DR_USB 50 #define CONFIG_USB_EHCI 51 #define CONFIG_USB_EHCI_FSL 52 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 53 #endif 54 55 /* XHCI Support - enabled by default */ 56 #define CONFIG_HAS_FSL_XHCI_USB 57 58 #ifdef CONFIG_HAS_FSL_XHCI_USB 59 #define CONFIG_USB_XHCI_FSL 60 #define CONFIG_USB_XHCI_DWC3 61 #define CONFIG_USB_XHCI 62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 63 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 64 #endif 65 66 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) 67 #define CONFIG_CMD_USB 68 #define CONFIG_USB_STORAGE 69 #define CONFIG_CMD_EXT2 70 #endif 71 72 /* 73 * Generic Timer Definitions 74 */ 75 #define GENERIC_TIMER_CLK 12500000 76 77 #define CONFIG_SYS_CLK_FREQ 100000000 78 #define CONFIG_DDR_CLK_FREQ 100000000 79 80 #define DDR_SDRAM_CFG 0x470c0008 81 #define DDR_CS0_BNDS 0x008000bf 82 #define DDR_CS0_CONFIG 0x80014302 83 #define DDR_TIMING_CFG_0 0x50550004 84 #define DDR_TIMING_CFG_1 0xbcb38c56 85 #define DDR_TIMING_CFG_2 0x0040d120 86 #define DDR_TIMING_CFG_3 0x010e1000 87 #define DDR_TIMING_CFG_4 0x00000001 88 #define DDR_TIMING_CFG_5 0x03401400 89 #define DDR_SDRAM_CFG_2 0x00401010 90 #define DDR_SDRAM_MODE 0x00061c60 91 #define DDR_SDRAM_MODE_2 0x00180000 92 #define DDR_SDRAM_INTERVAL 0x18600618 93 #define DDR_DDR_WRLVL_CNTL 0x8655f605 94 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 95 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 96 #define DDR_DDR_CDR1 0x80040000 97 #define DDR_DDR_CDR2 0x00000001 98 #define DDR_SDRAM_CLK_CNTL 0x02000000 99 #define DDR_DDR_ZQ_CNTL 0x89080600 100 #define DDR_CS0_CONFIG_2 0 101 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 102 #define SDRAM_CFG2_D_INIT 0x00000010 103 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 104 #define SDRAM_CFG2_FRC_SR 0x80000000 105 #define SDRAM_CFG_BI 0x00000001 106 107 #ifdef CONFIG_RAMBOOT_PBL 108 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg 109 #endif 110 111 #ifdef CONFIG_SD_BOOT 112 #ifdef CONFIG_SD_BOOT_QSPI 113 #define CONFIG_SYS_FSL_PBL_RCW \ 114 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg 115 #else 116 #define CONFIG_SYS_FSL_PBL_RCW \ 117 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg 118 #endif 119 #define CONFIG_SPL_FRAMEWORK 120 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 121 #define CONFIG_SPL_LIBCOMMON_SUPPORT 122 #define CONFIG_SPL_LIBGENERIC_SUPPORT 123 #define CONFIG_SPL_ENV_SUPPORT 124 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 125 #define CONFIG_SPL_I2C_SUPPORT 126 #define CONFIG_SPL_WATCHDOG_SUPPORT 127 #define CONFIG_SPL_SERIAL_SUPPORT 128 #define CONFIG_SPL_MMC_SUPPORT 129 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 130 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 131 132 #define CONFIG_SPL_TEXT_BASE 0x10000000 133 #define CONFIG_SPL_MAX_SIZE 0x1a000 134 #define CONFIG_SPL_STACK 0x1001d000 135 #define CONFIG_SPL_PAD_TO 0x1c000 136 #define CONFIG_SYS_TEXT_BASE 0x82000000 137 138 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 139 CONFIG_SYS_MONITOR_LEN) 140 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 141 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 142 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 143 #define CONFIG_SYS_MONITOR_LEN 0x80000 144 #endif 145 146 #ifdef CONFIG_QSPI_BOOT 147 #define CONFIG_SYS_TEXT_BASE 0x40010000 148 #endif 149 150 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 151 #define CONFIG_SYS_NO_FLASH 152 #endif 153 154 #ifndef CONFIG_SYS_TEXT_BASE 155 #define CONFIG_SYS_TEXT_BASE 0x60100000 156 #endif 157 158 #define CONFIG_NR_DRAM_BANKS 1 159 #define PHYS_SDRAM 0x80000000 160 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 161 162 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 163 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 164 165 #define CONFIG_SYS_HAS_SERDES 166 167 #define CONFIG_FSL_CAAM /* Enable CAAM */ 168 169 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ 170 !defined(CONFIG_QSPI_BOOT) 171 #define CONFIG_U_QE 172 #endif 173 174 /* 175 * IFC Definitions 176 */ 177 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 178 #define CONFIG_FSL_IFC 179 #define CONFIG_SYS_FLASH_BASE 0x60000000 180 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 181 182 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 183 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 184 CSPR_PORT_SIZE_16 | \ 185 CSPR_MSEL_NOR | \ 186 CSPR_V) 187 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) 188 189 /* NOR Flash Timing Params */ 190 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 191 CSOR_NOR_TRHZ_80) 192 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 193 FTIM0_NOR_TEADC(0x5) | \ 194 FTIM0_NOR_TAVDS(0x0) | \ 195 FTIM0_NOR_TEAHC(0x5)) 196 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 197 FTIM1_NOR_TRAD_NOR(0x1A) | \ 198 FTIM1_NOR_TSEQRAD_NOR(0x13)) 199 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 200 FTIM2_NOR_TCH(0x4) | \ 201 FTIM2_NOR_TWP(0x1c) | \ 202 FTIM2_NOR_TWPH(0x0e)) 203 #define CONFIG_SYS_NOR_FTIM3 0 204 205 #define CONFIG_FLASH_CFI_DRIVER 206 #define CONFIG_SYS_FLASH_CFI 207 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 208 #define CONFIG_SYS_FLASH_QUIET_TEST 209 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 210 211 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 212 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 213 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 214 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 215 216 #define CONFIG_SYS_FLASH_EMPTY_INFO 217 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 218 219 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 220 #define CONFIG_SYS_WRITE_SWAPPED_DATA 221 #endif 222 223 /* CPLD */ 224 225 #define CONFIG_SYS_CPLD_BASE 0x7fb00000 226 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 227 228 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 229 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ 230 CSPR_PORT_SIZE_8 | \ 231 CSPR_MSEL_GPCM | \ 232 CSPR_V) 233 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) 234 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 235 CSOR_NOR_NOR_MODE_AVD_NOR | \ 236 CSOR_NOR_TRHZ_80) 237 238 /* CPLD Timing parameters for IFC GPCM */ 239 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ 240 FTIM0_GPCM_TEADC(0xf) | \ 241 FTIM0_GPCM_TEAHC(0xf)) 242 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 243 FTIM1_GPCM_TRAD(0x3f)) 244 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 245 FTIM2_GPCM_TCH(0xf) | \ 246 FTIM2_GPCM_TWP(0xff)) 247 #define CONFIG_SYS_FPGA_FTIM3 0x0 248 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 249 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 250 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 251 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 252 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 253 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 254 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 255 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 256 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT 257 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR 258 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK 259 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR 260 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 261 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 262 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 263 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 264 265 /* 266 * Serial Port 267 */ 268 #ifdef CONFIG_LPUART 269 #define CONFIG_LPUART_32B_REG 270 #else 271 #define CONFIG_CONS_INDEX 1 272 #define CONFIG_SYS_NS16550_SERIAL 273 #ifndef CONFIG_DM_SERIAL 274 #define CONFIG_SYS_NS16550_REG_SIZE 1 275 #endif 276 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 277 #endif 278 279 #define CONFIG_BAUDRATE 115200 280 281 /* 282 * I2C 283 */ 284 #define CONFIG_CMD_I2C 285 #define CONFIG_SYS_I2C 286 #define CONFIG_SYS_I2C_MXC 287 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 288 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 289 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 290 291 /* EEPROM */ 292 #define CONFIG_ID_EEPROM 293 #define CONFIG_SYS_I2C_EEPROM_NXID 294 #define CONFIG_SYS_EEPROM_BUS_NUM 1 295 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 296 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 297 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 298 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 299 300 /* 301 * MMC 302 */ 303 #define CONFIG_MMC 304 #define CONFIG_CMD_MMC 305 #define CONFIG_FSL_ESDHC 306 #define CONFIG_GENERIC_MMC 307 308 #define CONFIG_CMD_FAT 309 #define CONFIG_DOS_PARTITION 310 311 /* SPI */ 312 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 313 /* QSPI */ 314 #define QSPI0_AMBA_BASE 0x40000000 315 #define FSL_QSPI_FLASH_SIZE (1 << 24) 316 #define FSL_QSPI_FLASH_NUM 2 317 318 /* DSPI */ 319 #endif 320 321 /* DM SPI */ 322 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 323 #define CONFIG_CMD_SF 324 #define CONFIG_DM_SPI_FLASH 325 #endif 326 327 /* 328 * Video 329 */ 330 #define CONFIG_FSL_DCU_FB 331 332 #ifdef CONFIG_FSL_DCU_FB 333 #define CONFIG_VIDEO 334 #define CONFIG_CMD_BMP 335 #define CONFIG_CFB_CONSOLE 336 #define CONFIG_VGA_AS_SINGLE_DEVICE 337 #define CONFIG_VIDEO_LOGO 338 #define CONFIG_VIDEO_BMP_LOGO 339 340 #define CONFIG_FSL_DCU_SII9022A 341 #define CONFIG_SYS_I2C_DVI_BUS_NUM 1 342 #define CONFIG_SYS_I2C_DVI_ADDR 0x39 343 #endif 344 345 /* 346 * eTSEC 347 */ 348 #define CONFIG_TSEC_ENET 349 350 #ifdef CONFIG_TSEC_ENET 351 #define CONFIG_MII 352 #define CONFIG_MII_DEFAULT_TSEC 1 353 #define CONFIG_TSEC1 1 354 #define CONFIG_TSEC1_NAME "eTSEC1" 355 #define CONFIG_TSEC2 1 356 #define CONFIG_TSEC2_NAME "eTSEC2" 357 #define CONFIG_TSEC3 1 358 #define CONFIG_TSEC3_NAME "eTSEC3" 359 360 #define TSEC1_PHY_ADDR 2 361 #define TSEC2_PHY_ADDR 0 362 #define TSEC3_PHY_ADDR 1 363 364 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 365 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 366 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 367 368 #define TSEC1_PHYIDX 0 369 #define TSEC2_PHYIDX 0 370 #define TSEC3_PHYIDX 0 371 372 #define CONFIG_ETHPRIME "eTSEC1" 373 374 #define CONFIG_PHY_GIGE 375 #define CONFIG_PHYLIB 376 #define CONFIG_PHY_ATHEROS 377 378 #define CONFIG_HAS_ETH0 379 #define CONFIG_HAS_ETH1 380 #define CONFIG_HAS_ETH2 381 #endif 382 383 /* PCIe */ 384 #define CONFIG_PCI /* Enable PCI/PCIE */ 385 #define CONFIG_PCIE1 /* PCIE controler 1 */ 386 #define CONFIG_PCIE2 /* PCIE controler 2 */ 387 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ 388 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 389 390 #define CONFIG_SYS_PCI_64BIT 391 392 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 393 #define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ 394 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 395 #define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ 396 397 #define CONFIG_SYS_PCIE_IO_BUS 0x00000000 398 #define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 399 #define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ 400 401 #define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 402 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 403 #define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ 404 405 #ifdef CONFIG_PCI 406 #define CONFIG_PCI_PNP 407 #define CONFIG_PCI_SCAN_SHOW 408 #define CONFIG_CMD_PCI 409 #endif 410 411 #define CONFIG_CMD_PING 412 #define CONFIG_CMD_DHCP 413 #define CONFIG_CMD_MII 414 415 #define CONFIG_CMDLINE_TAG 416 #define CONFIG_CMDLINE_EDITING 417 418 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 419 #undef CONFIG_CMD_IMLS 420 #endif 421 422 #define CONFIG_ARMV7_NONSEC 423 #define CONFIG_ARMV7_VIRT 424 #define CONFIG_PEN_ADDR_BIG_ENDIAN 425 #define CONFIG_LAYERSCAPE_NS_ACCESS 426 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 427 #define CONFIG_TIMER_CLK_FREQ 12500000 428 429 #define CONFIG_HWCONFIG 430 #define HWCONFIG_BUFFER_SIZE 256 431 432 #define CONFIG_FSL_DEVICE_DISABLE 433 434 #define CONFIG_BOOTDELAY 3 435 436 #ifdef CONFIG_LPUART 437 #define CONFIG_EXTRA_ENV_SETTINGS \ 438 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ 439 "initrd_high=0xffffffff\0" \ 440 "fdt_high=0xffffffff\0" 441 #else 442 #define CONFIG_EXTRA_ENV_SETTINGS \ 443 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 444 "initrd_high=0xffffffff\0" \ 445 "fdt_high=0xffffffff\0" 446 #endif 447 448 /* 449 * Miscellaneous configurable options 450 */ 451 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 452 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 453 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 454 #define CONFIG_AUTO_COMPLETE 455 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 456 #define CONFIG_SYS_PBSIZE \ 457 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 458 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 459 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 460 461 #define CONFIG_CMD_GREPENV 462 #define CONFIG_CMD_MEMINFO 463 #define CONFIG_CMD_MEMTEST 464 #define CONFIG_SYS_MEMTEST_START 0x80000000 465 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 466 467 #define CONFIG_SYS_LOAD_ADDR 0x82000000 468 469 #define CONFIG_LS102XA_STREAM_ID 470 471 /* 472 * Stack sizes 473 * The stack sizes are set up in start.S using the settings below 474 */ 475 #define CONFIG_STACKSIZE (30 * 1024) 476 477 #define CONFIG_SYS_INIT_SP_OFFSET \ 478 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 479 #define CONFIG_SYS_INIT_SP_ADDR \ 480 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 481 482 #ifdef CONFIG_SPL_BUILD 483 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 484 #else 485 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 486 #endif 487 488 #define CONFIG_SYS_QE_FW_ADDR 0x600c0000 489 490 /* 491 * Environment 492 */ 493 #define CONFIG_ENV_OVERWRITE 494 495 #if defined(CONFIG_SD_BOOT) 496 #define CONFIG_ENV_OFFSET 0x100000 497 #define CONFIG_ENV_IS_IN_MMC 498 #define CONFIG_SYS_MMC_ENV_DEV 0 499 #define CONFIG_ENV_SIZE 0x20000 500 #elif defined(CONFIG_QSPI_BOOT) 501 #define CONFIG_ENV_IS_IN_SPI_FLASH 502 #define CONFIG_ENV_SIZE 0x2000 503 #define CONFIG_ENV_OFFSET 0x100000 504 #define CONFIG_ENV_SECT_SIZE 0x10000 505 #else 506 #define CONFIG_ENV_IS_IN_FLASH 507 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 508 #define CONFIG_ENV_SIZE 0x20000 509 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 510 #endif 511 512 #define CONFIG_OF_LIBFDT 513 #define CONFIG_OF_BOARD_SETUP 514 #define CONFIG_OF_STDOUT_VIA_ALIAS 515 #define CONFIG_CMD_BOOTZ 516 517 #define CONFIG_MISC_INIT_R 518 519 /* Hash command with SHA acceleration supported in hardware */ 520 #define CONFIG_CMD_HASH 521 #define CONFIG_SHA_HW_ACCEL 522 523 #ifdef CONFIG_SECURE_BOOT 524 #define CONFIG_CMD_BLOB 525 #include <asm/fsl_secure_boot.h> 526 #endif 527 528 #endif 529