xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision fc47cf9d)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #define CONFIG_LS102XA
11 
12 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
13 
14 #define CONFIG_SYS_FSL_CLK
15 
16 #define CONFIG_BOARD_EARLY_INIT_F
17 
18 /*
19  * Size of malloc() pool
20  */
21 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
22 
23 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
24 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
25 
26 /* XHCI Support - enabled by default */
27 #define CONFIG_HAS_FSL_XHCI_USB
28 
29 #ifdef CONFIG_HAS_FSL_XHCI_USB
30 #define CONFIG_USB_XHCI_FSL
31 #define CONFIG_USB_XHCI_DWC3
32 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
33 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
34 #endif
35 
36 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
37 #define CONFIG_USB_STORAGE
38 #define CONFIG_CMD_EXT2
39 #endif
40 
41 /*
42  * Generic Timer Definitions
43  */
44 #define GENERIC_TIMER_CLK		12500000
45 
46 #define CONFIG_SYS_CLK_FREQ		100000000
47 #define CONFIG_DDR_CLK_FREQ		100000000
48 
49 /*
50  * DDR: 800 MHz ( 1600 MT/s data rate )
51  */
52 
53 #define DDR_SDRAM_CFG			0x470c0008
54 #define DDR_CS0_BNDS			0x008000bf
55 #define DDR_CS0_CONFIG			0x80014302
56 #define DDR_TIMING_CFG_0		0x50550004
57 #define DDR_TIMING_CFG_1		0xbcb38c56
58 #define DDR_TIMING_CFG_2		0x0040d120
59 #define DDR_TIMING_CFG_3		0x010e1000
60 #define DDR_TIMING_CFG_4		0x00000001
61 #define DDR_TIMING_CFG_5		0x03401400
62 #define DDR_SDRAM_CFG_2			0x00401010
63 #define DDR_SDRAM_MODE			0x00061c60
64 #define DDR_SDRAM_MODE_2		0x00180000
65 #define DDR_SDRAM_INTERVAL		0x18600618
66 #define DDR_DDR_WRLVL_CNTL		0x8655f605
67 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
68 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
69 #define DDR_DDR_CDR1			0x80040000
70 #define DDR_DDR_CDR2			0x00000001
71 #define DDR_SDRAM_CLK_CNTL		0x02000000
72 #define DDR_DDR_ZQ_CNTL			0x89080600
73 #define DDR_CS0_CONFIG_2		0
74 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
75 #define SDRAM_CFG2_D_INIT		0x00000010
76 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
77 #define SDRAM_CFG2_FRC_SR		0x80000000
78 #define SDRAM_CFG_BI			0x00000001
79 
80 #ifdef CONFIG_RAMBOOT_PBL
81 #define CONFIG_SYS_FSL_PBL_PBI	\
82 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
83 #endif
84 
85 #ifdef CONFIG_SD_BOOT
86 #define CONFIG_SYS_FSL_PBL_RCW	\
87 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
88 #define CONFIG_SPL_FRAMEWORK
89 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
90 #define CONFIG_SPL_LIBCOMMON_SUPPORT
91 #define CONFIG_SPL_LIBGENERIC_SUPPORT
92 #define CONFIG_SPL_ENV_SUPPORT
93 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
94 #define CONFIG_SPL_I2C_SUPPORT
95 #define CONFIG_SPL_WATCHDOG_SUPPORT
96 #define CONFIG_SPL_SERIAL_SUPPORT
97 #define CONFIG_SPL_MMC_SUPPORT
98 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
99 
100 #define CONFIG_SPL_TEXT_BASE	0x10000000
101 #define CONFIG_SPL_MAX_SIZE		0x1a000
102 #define CONFIG_SPL_STACK		0x1001d000
103 #define CONFIG_SPL_PAD_TO		0x1c000
104 #define CONFIG_SYS_TEXT_BASE	0x82000000
105 
106 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
107 		CONFIG_SYS_MONITOR_LEN)
108 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
109 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
110 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
111 #define CONFIG_SYS_MONITOR_LEN		0x80000
112 #define CONFIG_SYS_NO_FLASH
113 #endif
114 
115 #ifdef CONFIG_QSPI_BOOT
116 #define CONFIG_SYS_TEXT_BASE		0x40010000
117 #endif
118 
119 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
120 #define CONFIG_SYS_NO_FLASH
121 #endif
122 
123 #define CONFIG_NR_DRAM_BANKS		1
124 
125 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
126 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
127 
128 #define CONFIG_FSL_CAAM			/* Enable CAAM */
129 
130 /*
131  * Serial Port
132  */
133 #define CONFIG_CONS_INDEX		1
134 #define CONFIG_SYS_NS16550_SERIAL
135 #define CONFIG_SYS_NS16550_REG_SIZE	1
136 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
137 #define CONFIG_BAUDRATE			115200
138 
139 /*
140  * I2C
141  */
142 #define CONFIG_CMD_I2C
143 #define CONFIG_SYS_I2C
144 #define CONFIG_SYS_I2C_MXC
145 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
146 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
147 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
148 
149 /* EEPROM */
150 #define CONFIG_ID_EEPROM
151 #define CONFIG_SYS_I2C_EEPROM_NXID
152 #define CONFIG_SYS_EEPROM_BUS_NUM		0
153 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
154 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
155 
156 /*
157  * MMC
158  */
159 #define CONFIG_MMC
160 #define CONFIG_CMD_MMC
161 #define CONFIG_FSL_ESDHC
162 #define CONFIG_GENERIC_MMC
163 
164 /* SATA */
165 #define CONFIG_BOARD_LATE_INIT
166 #define CONFIG_CMD_SCSI
167 #define CONFIG_LIBATA
168 #define CONFIG_SCSI_AHCI
169 #define CONFIG_SCSI_AHCI_PLAT
170 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
171 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
172 #endif
173 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
174 	PCI_DEVICE_ID_FREESCALE_AHCI}
175 
176 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
177 #define CONFIG_SYS_SCSI_MAX_LUN		1
178 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
179 		CONFIG_SYS_SCSI_MAX_LUN)
180 
181 #define CONFIG_CMD_FAT
182 #define CONFIG_DOS_PARTITION
183 
184 /* SPI */
185 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
186 #define CONFIG_SPI_FLASH_SPANSION
187 
188 /* QSPI */
189 #define QSPI0_AMBA_BASE			0x40000000
190 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
191 #define FSL_QSPI_FLASH_NUM		2
192 #define CONFIG_SPI_FLASH_BAR
193 #define CONFIG_SPI_FLASH_SPANSION
194 #endif
195 
196 /* DM SPI */
197 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
198 #define CONFIG_CMD_SF
199 #define CONFIG_DM_SPI_FLASH
200 #endif
201 
202 /*
203  * eTSEC
204  */
205 #define CONFIG_TSEC_ENET
206 
207 #ifdef CONFIG_TSEC_ENET
208 #define CONFIG_MII
209 #define CONFIG_MII_DEFAULT_TSEC		1
210 #define CONFIG_TSEC1			1
211 #define CONFIG_TSEC1_NAME		"eTSEC1"
212 #define CONFIG_TSEC2			1
213 #define CONFIG_TSEC2_NAME		"eTSEC2"
214 
215 #define TSEC1_PHY_ADDR			1
216 #define TSEC2_PHY_ADDR			3
217 
218 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
219 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
220 
221 #define TSEC1_PHYIDX			0
222 #define TSEC2_PHYIDX			0
223 
224 #define CONFIG_ETHPRIME			"eTSEC2"
225 
226 #define CONFIG_PHY_GIGE
227 #define CONFIG_PHYLIB
228 #define CONFIG_PHY_ATHEROS
229 
230 #define CONFIG_HAS_ETH0
231 #define CONFIG_HAS_ETH1
232 #define CONFIG_HAS_ETH2
233 #endif
234 
235 /* PCIe */
236 #define CONFIG_PCI		/* Enable PCI/PCIE */
237 #define CONFIG_PCIE1		/* PCIE controler 1 */
238 #define CONFIG_PCIE2		/* PCIE controler 2 */
239 
240 /* Use common FSL Layerscape PCIe code */
241 #define CONFIG_PCIE_LAYERSCAPE
242 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
243 
244 #define CONFIG_SYS_PCI_64BIT
245 
246 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
247 #define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
248 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
249 #define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
250 
251 #define CONFIG_SYS_PCIE_IO_BUS		0x00000000
252 #define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
253 #define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
254 
255 #define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
256 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
257 #define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
258 
259 #ifdef CONFIG_PCI
260 #define CONFIG_PCI_PNP
261 #define CONFIG_PCI_SCAN_SHOW
262 #define CONFIG_CMD_PCI
263 #endif
264 
265 #define CONFIG_CMD_PING
266 #define CONFIG_CMD_DHCP
267 #define CONFIG_CMD_MII
268 
269 #define CONFIG_CMDLINE_TAG
270 #define CONFIG_CMDLINE_EDITING
271 
272 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
273 #undef	CONFIG_CMD_IMLS
274 #endif
275 
276 #define CONFIG_PEN_ADDR_BIG_ENDIAN
277 #define CONFIG_LAYERSCAPE_NS_ACCESS
278 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
279 #define CONFIG_TIMER_CLK_FREQ		12500000
280 
281 #define CONFIG_HWCONFIG
282 #define HWCONFIG_BUFFER_SIZE		256
283 
284 #define CONFIG_FSL_DEVICE_DISABLE
285 
286 #define CONFIG_EXTRA_ENV_SETTINGS	\
287 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
288 "initrd_high=0xffffffff\0"	\
289 "fdt_high=0xffffffff\0"
290 
291 /*
292  * Miscellaneous configurable options
293  */
294 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
295 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
296 #define CONFIG_AUTO_COMPLETE
297 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
298 #define CONFIG_SYS_PBSIZE		\
299 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
300 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
301 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
302 
303 #define CONFIG_CMD_GREPENV
304 #define CONFIG_CMD_MEMINFO
305 
306 #define CONFIG_SYS_LOAD_ADDR		0x82000000
307 
308 #define CONFIG_LS102XA_STREAM_ID
309 
310 /*
311  * Stack sizes
312  * The stack sizes are set up in start.S using the settings below
313  */
314 #define CONFIG_STACKSIZE		(30 * 1024)
315 
316 #define CONFIG_SYS_INIT_SP_OFFSET \
317 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
318 #define CONFIG_SYS_INIT_SP_ADDR \
319 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
320 
321 #ifdef CONFIG_SPL_BUILD
322 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
323 #else
324 /* start of monitor */
325 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
326 #endif
327 
328 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
329 
330 /*
331  * Environment
332  */
333 
334 #define CONFIG_ENV_OVERWRITE
335 
336 #if defined(CONFIG_SD_BOOT)
337 #define CONFIG_ENV_OFFSET		0x100000
338 #define CONFIG_ENV_IS_IN_MMC
339 #define CONFIG_SYS_MMC_ENV_DEV	0
340 #define CONFIG_ENV_SIZE			0x2000
341 #elif defined(CONFIG_QSPI_BOOT)
342 #define CONFIG_ENV_IS_IN_SPI_FLASH
343 #define CONFIG_ENV_SIZE			0x2000
344 #define CONFIG_ENV_OFFSET		0x100000
345 #define CONFIG_ENV_SECT_SIZE	0x10000
346 #endif
347 
348 #define CONFIG_OF_BOARD_SETUP
349 #define CONFIG_OF_STDOUT_VIA_ALIAS
350 #define CONFIG_CMD_BOOTZ
351 
352 #define CONFIG_MISC_INIT_R
353 
354 /* Hash command with SHA acceleration supported in hardware */
355 
356 #ifdef CONFIG_FSL_CAAM
357 
358 #define CONFIG_CMD_HASH
359 
360 #define CONFIG_SHA_HW_ACCEL
361 
362 #endif
363 
364 #include <asm/fsl_secure_boot.h>
365 
366 #endif
367