1 /* 2 * Copyright 2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_LS102XA 11 12 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 13 14 #define CONFIG_SYS_FSL_CLK 15 16 /* 17 * Size of malloc() pool 18 */ 19 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 20 21 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 22 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 23 24 /* XHCI Support - enabled by default */ 25 #define CONFIG_HAS_FSL_XHCI_USB 26 27 #ifdef CONFIG_HAS_FSL_XHCI_USB 28 #define CONFIG_USB_XHCI_FSL 29 #define CONFIG_USB_XHCI_DWC3 30 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 31 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 32 #endif 33 34 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) 35 #define CONFIG_USB_STORAGE 36 #define CONFIG_CMD_EXT2 37 #endif 38 39 /* 40 * Generic Timer Definitions 41 */ 42 #define GENERIC_TIMER_CLK 12500000 43 44 #define CONFIG_SYS_CLK_FREQ 100000000 45 #define CONFIG_DDR_CLK_FREQ 100000000 46 47 /* 48 * DDR: 800 MHz ( 1600 MT/s data rate ) 49 */ 50 51 #define DDR_SDRAM_CFG 0x470c0008 52 #define DDR_CS0_BNDS 0x008000bf 53 #define DDR_CS0_CONFIG 0x80014302 54 #define DDR_TIMING_CFG_0 0x50550004 55 #define DDR_TIMING_CFG_1 0xbcb38c56 56 #define DDR_TIMING_CFG_2 0x0040d120 57 #define DDR_TIMING_CFG_3 0x010e1000 58 #define DDR_TIMING_CFG_4 0x00000001 59 #define DDR_TIMING_CFG_5 0x03401400 60 #define DDR_SDRAM_CFG_2 0x00401010 61 #define DDR_SDRAM_MODE 0x00061c60 62 #define DDR_SDRAM_MODE_2 0x00180000 63 #define DDR_SDRAM_INTERVAL 0x18600618 64 #define DDR_DDR_WRLVL_CNTL 0x8655f605 65 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 66 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 67 #define DDR_DDR_CDR1 0x80040000 68 #define DDR_DDR_CDR2 0x00000001 69 #define DDR_SDRAM_CLK_CNTL 0x02000000 70 #define DDR_DDR_ZQ_CNTL 0x89080600 71 #define DDR_CS0_CONFIG_2 0 72 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 73 #define SDRAM_CFG2_D_INIT 0x00000010 74 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 75 #define SDRAM_CFG2_FRC_SR 0x80000000 76 #define SDRAM_CFG_BI 0x00000001 77 78 #ifdef CONFIG_RAMBOOT_PBL 79 #define CONFIG_SYS_FSL_PBL_PBI \ 80 board/freescale/ls1021aiot/ls102xa_pbi.cfg 81 #endif 82 83 #ifdef CONFIG_SD_BOOT 84 #define CONFIG_SYS_FSL_PBL_RCW \ 85 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg 86 #define CONFIG_SPL_FRAMEWORK 87 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 88 #define CONFIG_SPL_LIBCOMMON_SUPPORT 89 #define CONFIG_SPL_LIBGENERIC_SUPPORT 90 #define CONFIG_SPL_ENV_SUPPORT 91 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 92 #define CONFIG_SPL_I2C_SUPPORT 93 #define CONFIG_SPL_WATCHDOG_SUPPORT 94 #define CONFIG_SPL_SERIAL_SUPPORT 95 #define CONFIG_SPL_MMC_SUPPORT 96 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 97 98 #define CONFIG_SPL_TEXT_BASE 0x10000000 99 #define CONFIG_SPL_MAX_SIZE 0x1a000 100 #define CONFIG_SPL_STACK 0x1001d000 101 #define CONFIG_SPL_PAD_TO 0x1c000 102 #define CONFIG_SYS_TEXT_BASE 0x82000000 103 104 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 105 CONFIG_SYS_MONITOR_LEN) 106 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 107 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 108 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 109 #define CONFIG_SYS_MONITOR_LEN 0x80000 110 #endif 111 112 #ifdef CONFIG_QSPI_BOOT 113 #define CONFIG_SYS_TEXT_BASE 0x40010000 114 #endif 115 116 #define CONFIG_NR_DRAM_BANKS 1 117 118 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 119 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 120 121 /* 122 * Serial Port 123 */ 124 #define CONFIG_CONS_INDEX 1 125 #define CONFIG_SYS_NS16550_SERIAL 126 #define CONFIG_SYS_NS16550_REG_SIZE 1 127 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 128 129 /* 130 * I2C 131 */ 132 #define CONFIG_CMD_I2C 133 #define CONFIG_SYS_I2C 134 #define CONFIG_SYS_I2C_MXC 135 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 136 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 137 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 138 139 /* EEPROM */ 140 #define CONFIG_ID_EEPROM 141 #define CONFIG_SYS_I2C_EEPROM_NXID 142 #define CONFIG_SYS_EEPROM_BUS_NUM 0 143 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 144 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 145 146 /* 147 * MMC 148 */ 149 #define CONFIG_CMD_MMC 150 #define CONFIG_FSL_ESDHC 151 152 /* SATA */ 153 #define CONFIG_CMD_SCSI 154 #define CONFIG_LIBATA 155 #define CONFIG_SCSI_AHCI 156 #define CONFIG_SCSI_AHCI_PLAT 157 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI 158 #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 159 #endif 160 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ 161 PCI_DEVICE_ID_FREESCALE_AHCI} 162 163 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 164 #define CONFIG_SYS_SCSI_MAX_LUN 1 165 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 166 CONFIG_SYS_SCSI_MAX_LUN) 167 168 #define CONFIG_CMD_FAT 169 170 /* SPI */ 171 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 172 #define CONFIG_SPI_FLASH_SPANSION 173 174 /* QSPI */ 175 #define QSPI0_AMBA_BASE 0x40000000 176 #define FSL_QSPI_FLASH_SIZE (1 << 24) 177 #define FSL_QSPI_FLASH_NUM 2 178 #define CONFIG_SPI_FLASH_BAR 179 #define CONFIG_SPI_FLASH_SPANSION 180 #endif 181 182 /* DM SPI */ 183 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 184 #define CONFIG_CMD_SF 185 #define CONFIG_DM_SPI_FLASH 186 #endif 187 188 /* 189 * eTSEC 190 */ 191 #define CONFIG_TSEC_ENET 192 193 #ifdef CONFIG_TSEC_ENET 194 #define CONFIG_MII 195 #define CONFIG_MII_DEFAULT_TSEC 1 196 #define CONFIG_TSEC1 1 197 #define CONFIG_TSEC1_NAME "eTSEC1" 198 #define CONFIG_TSEC2 1 199 #define CONFIG_TSEC2_NAME "eTSEC2" 200 201 #define TSEC1_PHY_ADDR 1 202 #define TSEC2_PHY_ADDR 3 203 204 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 205 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 206 207 #define TSEC1_PHYIDX 0 208 #define TSEC2_PHYIDX 0 209 210 #define CONFIG_ETHPRIME "eTSEC2" 211 212 #define CONFIG_PHY_GIGE 213 #define CONFIG_PHYLIB 214 #define CONFIG_PHY_ATHEROS 215 216 #define CONFIG_HAS_ETH0 217 #define CONFIG_HAS_ETH1 218 #define CONFIG_HAS_ETH2 219 #endif 220 221 /* PCIe */ 222 #define CONFIG_PCIE1 /* PCIE controler 1 */ 223 #define CONFIG_PCIE2 /* PCIE controler 2 */ 224 225 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 226 227 #ifdef CONFIG_PCI 228 #define CONFIG_PCI_SCAN_SHOW 229 #define CONFIG_CMD_PCI 230 #endif 231 232 #define CONFIG_CMD_PING 233 #define CONFIG_CMD_DHCP 234 #define CONFIG_CMD_MII 235 236 #define CONFIG_CMDLINE_TAG 237 #define CONFIG_CMDLINE_EDITING 238 239 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT) 240 #undef CONFIG_CMD_IMLS 241 #endif 242 243 #define CONFIG_PEN_ADDR_BIG_ENDIAN 244 #define CONFIG_LAYERSCAPE_NS_ACCESS 245 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 246 #define CONFIG_TIMER_CLK_FREQ 12500000 247 248 #define CONFIG_HWCONFIG 249 #define HWCONFIG_BUFFER_SIZE 256 250 251 #define CONFIG_FSL_DEVICE_DISABLE 252 253 #define CONFIG_EXTRA_ENV_SETTINGS \ 254 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 255 "initrd_high=0xffffffff\0" \ 256 "fdt_high=0xffffffff\0" 257 258 /* 259 * Miscellaneous configurable options 260 */ 261 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 262 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 263 #define CONFIG_AUTO_COMPLETE 264 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 265 #define CONFIG_SYS_PBSIZE \ 266 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 267 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 268 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 269 270 #define CONFIG_CMD_GREPENV 271 #define CONFIG_CMD_MEMINFO 272 273 #define CONFIG_SYS_LOAD_ADDR 0x82000000 274 275 #define CONFIG_LS102XA_STREAM_ID 276 277 /* 278 * Stack sizes 279 * The stack sizes are set up in start.S using the settings below 280 */ 281 #define CONFIG_STACKSIZE (30 * 1024) 282 283 #define CONFIG_SYS_INIT_SP_OFFSET \ 284 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 285 #define CONFIG_SYS_INIT_SP_ADDR \ 286 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 287 288 #ifdef CONFIG_SPL_BUILD 289 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 290 #else 291 /* start of monitor */ 292 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 293 #endif 294 295 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 296 297 /* 298 * Environment 299 */ 300 301 #define CONFIG_ENV_OVERWRITE 302 303 #if defined(CONFIG_SD_BOOT) 304 #define CONFIG_ENV_OFFSET 0x100000 305 #define CONFIG_ENV_IS_IN_MMC 306 #define CONFIG_SYS_MMC_ENV_DEV 0 307 #define CONFIG_ENV_SIZE 0x2000 308 #elif defined(CONFIG_QSPI_BOOT) 309 #define CONFIG_ENV_IS_IN_SPI_FLASH 310 #define CONFIG_ENV_SIZE 0x2000 311 #define CONFIG_ENV_OFFSET 0x100000 312 #define CONFIG_ENV_SECT_SIZE 0x10000 313 #endif 314 315 #define CONFIG_OF_BOARD_SETUP 316 #define CONFIG_OF_STDOUT_VIA_ALIAS 317 #define CONFIG_CMD_BOOTZ 318 319 #define CONFIG_MISC_INIT_R 320 321 /* Hash command with SHA acceleration supported in hardware */ 322 323 #ifdef CONFIG_FSL_CAAM 324 325 #define CONFIG_CMD_HASH 326 327 #define CONFIG_SHA_HW_ACCEL 328 329 #endif 330 331 #include <asm/fsl_secure_boot.h> 332 333 #endif 334