1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor, Inc. 4 */ 5 6 #ifndef __CONFIG_H 7 #define __CONFIG_H 8 9 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 10 11 #define CONFIG_SYS_FSL_CLK 12 13 /* 14 * Size of malloc() pool 15 */ 16 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 17 18 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 19 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 20 21 #define CONFIG_SYS_CLK_FREQ 100000000 22 #define CONFIG_DDR_CLK_FREQ 100000000 23 24 /* 25 * DDR: 800 MHz ( 1600 MT/s data rate ) 26 */ 27 28 #define DDR_SDRAM_CFG 0x470c0008 29 #define DDR_CS0_BNDS 0x008000bf 30 #define DDR_CS0_CONFIG 0x80014302 31 #define DDR_TIMING_CFG_0 0x50550004 32 #define DDR_TIMING_CFG_1 0xbcb38c56 33 #define DDR_TIMING_CFG_2 0x0040d120 34 #define DDR_TIMING_CFG_3 0x010e1000 35 #define DDR_TIMING_CFG_4 0x00000001 36 #define DDR_TIMING_CFG_5 0x03401400 37 #define DDR_SDRAM_CFG_2 0x00401010 38 #define DDR_SDRAM_MODE 0x00061c60 39 #define DDR_SDRAM_MODE_2 0x00180000 40 #define DDR_SDRAM_INTERVAL 0x18600618 41 #define DDR_DDR_WRLVL_CNTL 0x8655f605 42 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 43 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 44 #define DDR_DDR_CDR1 0x80040000 45 #define DDR_DDR_CDR2 0x00000001 46 #define DDR_SDRAM_CLK_CNTL 0x02000000 47 #define DDR_DDR_ZQ_CNTL 0x89080600 48 #define DDR_CS0_CONFIG_2 0 49 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 50 #define SDRAM_CFG2_D_INIT 0x00000010 51 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 52 #define SDRAM_CFG2_FRC_SR 0x80000000 53 #define SDRAM_CFG_BI 0x00000001 54 55 #ifdef CONFIG_RAMBOOT_PBL 56 #define CONFIG_SYS_FSL_PBL_PBI \ 57 board/freescale/ls1021aiot/ls102xa_pbi.cfg 58 #endif 59 60 #ifdef CONFIG_SD_BOOT 61 #define CONFIG_SYS_FSL_PBL_RCW \ 62 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg 63 #define CONFIG_SPL_LIBCOMMON_SUPPORT 64 #define CONFIG_SPL_LIBGENERIC_SUPPORT 65 #define CONFIG_SPL_ENV_SUPPORT 66 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 67 #define CONFIG_SPL_I2C_SUPPORT 68 #define CONFIG_SPL_WATCHDOG_SUPPORT 69 #define CONFIG_SPL_MMC_SUPPORT 70 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 71 72 #define CONFIG_SPL_TEXT_BASE 0x10000000 73 #define CONFIG_SPL_MAX_SIZE 0x1a000 74 #define CONFIG_SPL_STACK 0x1001d000 75 #define CONFIG_SPL_PAD_TO 0x1c000 76 77 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 78 CONFIG_SYS_MONITOR_LEN) 79 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 80 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 81 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 82 #define CONFIG_SYS_MONITOR_LEN 0x80000 83 #endif 84 85 #define CONFIG_NR_DRAM_BANKS 1 86 87 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 88 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 89 90 /* 91 * Serial Port 92 */ 93 #define CONFIG_SYS_NS16550_SERIAL 94 #define CONFIG_SYS_NS16550_REG_SIZE 1 95 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 96 97 /* 98 * I2C 99 */ 100 #define CONFIG_CMD_I2C 101 #define CONFIG_SYS_I2C 102 #define CONFIG_SYS_I2C_MXC 103 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 104 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 105 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 106 107 /* EEPROM */ 108 #define CONFIG_ID_EEPROM 109 #define CONFIG_SYS_I2C_EEPROM_NXID 110 #define CONFIG_SYS_EEPROM_BUS_NUM 0 111 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 112 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 113 114 /* 115 * MMC 116 */ 117 #define CONFIG_CMD_MMC 118 119 /* SATA */ 120 #define CONFIG_SCSI_AHCI_PLAT 121 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI 122 #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 123 #endif 124 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ 125 PCI_DEVICE_ID_FREESCALE_AHCI} 126 127 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 128 #define CONFIG_SYS_SCSI_MAX_LUN 1 129 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 130 CONFIG_SYS_SCSI_MAX_LUN) 131 132 /* SPI */ 133 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 134 #define CONFIG_SPI_FLASH_SPANSION 135 136 /* QSPI */ 137 #define QSPI0_AMBA_BASE 0x40000000 138 #define FSL_QSPI_FLASH_SIZE (1 << 24) 139 #define FSL_QSPI_FLASH_NUM 2 140 #define CONFIG_SPI_FLASH_BAR 141 #define CONFIG_SPI_FLASH_SPANSION 142 #endif 143 144 /* DM SPI */ 145 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 146 #define CONFIG_CMD_SF 147 #define CONFIG_DM_SPI_FLASH 148 #endif 149 150 /* 151 * eTSEC 152 */ 153 154 #ifdef CONFIG_TSEC_ENET 155 #define CONFIG_MII 156 #define CONFIG_MII_DEFAULT_TSEC 1 157 #define CONFIG_TSEC1 1 158 #define CONFIG_TSEC1_NAME "eTSEC1" 159 #define CONFIG_TSEC2 1 160 #define CONFIG_TSEC2_NAME "eTSEC2" 161 162 #define TSEC1_PHY_ADDR 1 163 #define TSEC2_PHY_ADDR 3 164 165 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 166 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 167 168 #define TSEC1_PHYIDX 0 169 #define TSEC2_PHYIDX 0 170 171 #define CONFIG_ETHPRIME "eTSEC2" 172 173 #define CONFIG_PHY_ATHEROS 174 175 #define CONFIG_HAS_ETH0 176 #define CONFIG_HAS_ETH1 177 #define CONFIG_HAS_ETH2 178 #endif 179 180 /* PCIe */ 181 #define CONFIG_PCIE1 /* PCIE controler 1 */ 182 #define CONFIG_PCIE2 /* PCIE controler 2 */ 183 184 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 185 186 #ifdef CONFIG_PCI 187 #define CONFIG_PCI_SCAN_SHOW 188 #endif 189 190 #define CONFIG_CMD_MII 191 192 #define CONFIG_CMDLINE_TAG 193 194 #define CONFIG_PEN_ADDR_BIG_ENDIAN 195 #define CONFIG_LAYERSCAPE_NS_ACCESS 196 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 197 #define COUNTER_FREQUENCY 12500000 198 199 #define CONFIG_HWCONFIG 200 #define HWCONFIG_BUFFER_SIZE 256 201 202 #define CONFIG_FSL_DEVICE_DISABLE 203 204 #define CONFIG_EXTRA_ENV_SETTINGS \ 205 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 206 "initrd_high=0xffffffff\0" \ 207 "fdt_high=0xffffffff\0" 208 209 /* 210 * Miscellaneous configurable options 211 */ 212 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 213 214 #define CONFIG_CMD_GREPENV 215 #define CONFIG_CMD_MEMINFO 216 217 #define CONFIG_SYS_LOAD_ADDR 0x82000000 218 219 #define CONFIG_LS102XA_STREAM_ID 220 221 #define CONFIG_SYS_INIT_SP_OFFSET \ 222 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 223 #define CONFIG_SYS_INIT_SP_ADDR \ 224 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 225 226 #ifdef CONFIG_SPL_BUILD 227 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 228 #else 229 /* start of monitor */ 230 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 231 #endif 232 233 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 234 235 /* 236 * Environment 237 */ 238 239 #define CONFIG_ENV_OVERWRITE 240 241 #if defined(CONFIG_SD_BOOT) 242 #define CONFIG_ENV_OFFSET 0x100000 243 #define CONFIG_SYS_MMC_ENV_DEV 0 244 #define CONFIG_ENV_SIZE 0x2000 245 #elif defined(CONFIG_QSPI_BOOT) 246 #define CONFIG_ENV_SIZE 0x2000 247 #define CONFIG_ENV_OFFSET 0x100000 248 #define CONFIG_ENV_SECT_SIZE 0x10000 249 #endif 250 251 #define CONFIG_OF_BOARD_SETUP 252 #define CONFIG_OF_STDOUT_VIA_ALIAS 253 254 #define CONFIG_MISC_INIT_R 255 256 #include <asm/fsl_secure_boot.h> 257 258 #endif 259