xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision a818704b)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
11 
12 #define CONFIG_SYS_FSL_CLK
13 
14 /*
15  * Size of malloc() pool
16  */
17 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
18 
19 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
20 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
21 
22 /* XHCI Support - enabled by default */
23 #define CONFIG_HAS_FSL_XHCI_USB
24 
25 #ifdef CONFIG_HAS_FSL_XHCI_USB
26 #define CONFIG_USB_XHCI_FSL
27 #define CONFIG_USB_XHCI_DWC3
28 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
29 #endif
30 
31 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
32 #define CONFIG_USB_STORAGE
33 #define CONFIG_CMD_EXT2
34 #endif
35 
36 #define CONFIG_SYS_CLK_FREQ		100000000
37 #define CONFIG_DDR_CLK_FREQ		100000000
38 
39 /*
40  * DDR: 800 MHz ( 1600 MT/s data rate )
41  */
42 
43 #define DDR_SDRAM_CFG			0x470c0008
44 #define DDR_CS0_BNDS			0x008000bf
45 #define DDR_CS0_CONFIG			0x80014302
46 #define DDR_TIMING_CFG_0		0x50550004
47 #define DDR_TIMING_CFG_1		0xbcb38c56
48 #define DDR_TIMING_CFG_2		0x0040d120
49 #define DDR_TIMING_CFG_3		0x010e1000
50 #define DDR_TIMING_CFG_4		0x00000001
51 #define DDR_TIMING_CFG_5		0x03401400
52 #define DDR_SDRAM_CFG_2			0x00401010
53 #define DDR_SDRAM_MODE			0x00061c60
54 #define DDR_SDRAM_MODE_2		0x00180000
55 #define DDR_SDRAM_INTERVAL		0x18600618
56 #define DDR_DDR_WRLVL_CNTL		0x8655f605
57 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
58 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
59 #define DDR_DDR_CDR1			0x80040000
60 #define DDR_DDR_CDR2			0x00000001
61 #define DDR_SDRAM_CLK_CNTL		0x02000000
62 #define DDR_DDR_ZQ_CNTL			0x89080600
63 #define DDR_CS0_CONFIG_2		0
64 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
65 #define SDRAM_CFG2_D_INIT		0x00000010
66 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
67 #define SDRAM_CFG2_FRC_SR		0x80000000
68 #define SDRAM_CFG_BI			0x00000001
69 
70 #ifdef CONFIG_RAMBOOT_PBL
71 #define CONFIG_SYS_FSL_PBL_PBI	\
72 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
73 #endif
74 
75 #ifdef CONFIG_SD_BOOT
76 #define CONFIG_SYS_FSL_PBL_RCW	\
77 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
78 #define CONFIG_SPL_FRAMEWORK
79 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
80 #define CONFIG_SPL_LIBCOMMON_SUPPORT
81 #define CONFIG_SPL_LIBGENERIC_SUPPORT
82 #define CONFIG_SPL_ENV_SUPPORT
83 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
84 #define CONFIG_SPL_I2C_SUPPORT
85 #define CONFIG_SPL_WATCHDOG_SUPPORT
86 #define CONFIG_SPL_SERIAL_SUPPORT
87 #define CONFIG_SPL_MMC_SUPPORT
88 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
89 
90 #define CONFIG_SPL_TEXT_BASE	0x10000000
91 #define CONFIG_SPL_MAX_SIZE		0x1a000
92 #define CONFIG_SPL_STACK		0x1001d000
93 #define CONFIG_SPL_PAD_TO		0x1c000
94 #define CONFIG_SYS_TEXT_BASE	0x82000000
95 
96 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
97 		CONFIG_SYS_MONITOR_LEN)
98 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
99 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
100 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
101 #define CONFIG_SYS_MONITOR_LEN		0x80000
102 #endif
103 
104 #ifdef CONFIG_QSPI_BOOT
105 #define CONFIG_SYS_TEXT_BASE		0x40010000
106 #endif
107 
108 #define CONFIG_NR_DRAM_BANKS		1
109 
110 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
111 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
112 
113 /*
114  * Serial Port
115  */
116 #define CONFIG_CONS_INDEX		1
117 #define CONFIG_SYS_NS16550_SERIAL
118 #define CONFIG_SYS_NS16550_REG_SIZE	1
119 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
120 
121 /*
122  * I2C
123  */
124 #define CONFIG_CMD_I2C
125 #define CONFIG_SYS_I2C
126 #define CONFIG_SYS_I2C_MXC
127 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
128 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
129 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
130 
131 /* EEPROM */
132 #define CONFIG_ID_EEPROM
133 #define CONFIG_SYS_I2C_EEPROM_NXID
134 #define CONFIG_SYS_EEPROM_BUS_NUM		0
135 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
136 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
137 
138 /*
139  * MMC
140  */
141 #define CONFIG_CMD_MMC
142 #define CONFIG_FSL_ESDHC
143 
144 /* SATA */
145 #define CONFIG_CMD_SCSI
146 #define CONFIG_LIBATA
147 #define CONFIG_SCSI_AHCI
148 #define CONFIG_SCSI_AHCI_PLAT
149 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
150 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
151 #endif
152 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
153 	PCI_DEVICE_ID_FREESCALE_AHCI}
154 
155 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
156 #define CONFIG_SYS_SCSI_MAX_LUN		1
157 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
158 		CONFIG_SYS_SCSI_MAX_LUN)
159 
160 /* SPI */
161 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
162 #define CONFIG_SPI_FLASH_SPANSION
163 
164 /* QSPI */
165 #define QSPI0_AMBA_BASE			0x40000000
166 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
167 #define FSL_QSPI_FLASH_NUM		2
168 #define CONFIG_SPI_FLASH_BAR
169 #define CONFIG_SPI_FLASH_SPANSION
170 #endif
171 
172 /* DM SPI */
173 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
174 #define CONFIG_CMD_SF
175 #define CONFIG_DM_SPI_FLASH
176 #endif
177 
178 /*
179  * eTSEC
180  */
181 #define CONFIG_TSEC_ENET
182 
183 #ifdef CONFIG_TSEC_ENET
184 #define CONFIG_MII
185 #define CONFIG_MII_DEFAULT_TSEC		1
186 #define CONFIG_TSEC1			1
187 #define CONFIG_TSEC1_NAME		"eTSEC1"
188 #define CONFIG_TSEC2			1
189 #define CONFIG_TSEC2_NAME		"eTSEC2"
190 
191 #define TSEC1_PHY_ADDR			1
192 #define TSEC2_PHY_ADDR			3
193 
194 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
195 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
196 
197 #define TSEC1_PHYIDX			0
198 #define TSEC2_PHYIDX			0
199 
200 #define CONFIG_ETHPRIME			"eTSEC2"
201 
202 #define CONFIG_PHY_GIGE
203 #define CONFIG_PHYLIB
204 #define CONFIG_PHY_ATHEROS
205 
206 #define CONFIG_HAS_ETH0
207 #define CONFIG_HAS_ETH1
208 #define CONFIG_HAS_ETH2
209 #endif
210 
211 /* PCIe */
212 #define CONFIG_PCIE1		/* PCIE controler 1 */
213 #define CONFIG_PCIE2		/* PCIE controler 2 */
214 
215 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
216 
217 #ifdef CONFIG_PCI
218 #define CONFIG_PCI_SCAN_SHOW
219 #define CONFIG_CMD_PCI
220 #endif
221 
222 #define CONFIG_CMD_PING
223 #define CONFIG_CMD_DHCP
224 #define CONFIG_CMD_MII
225 
226 #define CONFIG_CMDLINE_TAG
227 #define CONFIG_CMDLINE_EDITING
228 
229 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
230 #undef	CONFIG_CMD_IMLS
231 #endif
232 
233 #define CONFIG_PEN_ADDR_BIG_ENDIAN
234 #define CONFIG_LAYERSCAPE_NS_ACCESS
235 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
236 #define COUNTER_FREQUENCY		12500000
237 
238 #define CONFIG_HWCONFIG
239 #define HWCONFIG_BUFFER_SIZE		256
240 
241 #define CONFIG_FSL_DEVICE_DISABLE
242 
243 #define CONFIG_EXTRA_ENV_SETTINGS	\
244 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
245 "initrd_high=0xffffffff\0"	\
246 "fdt_high=0xffffffff\0"
247 
248 /*
249  * Miscellaneous configurable options
250  */
251 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
252 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
253 #define CONFIG_AUTO_COMPLETE
254 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
255 #define CONFIG_SYS_PBSIZE		\
256 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
257 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
258 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
259 
260 #define CONFIG_CMD_GREPENV
261 #define CONFIG_CMD_MEMINFO
262 
263 #define CONFIG_SYS_LOAD_ADDR		0x82000000
264 
265 #define CONFIG_LS102XA_STREAM_ID
266 
267 #define CONFIG_SYS_INIT_SP_OFFSET \
268 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
269 #define CONFIG_SYS_INIT_SP_ADDR \
270 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
271 
272 #ifdef CONFIG_SPL_BUILD
273 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
274 #else
275 /* start of monitor */
276 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
277 #endif
278 
279 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
280 
281 /*
282  * Environment
283  */
284 
285 #define CONFIG_ENV_OVERWRITE
286 
287 #if defined(CONFIG_SD_BOOT)
288 #define CONFIG_ENV_OFFSET		0x100000
289 #define CONFIG_SYS_MMC_ENV_DEV	0
290 #define CONFIG_ENV_SIZE			0x2000
291 #elif defined(CONFIG_QSPI_BOOT)
292 #define CONFIG_ENV_SIZE			0x2000
293 #define CONFIG_ENV_OFFSET		0x100000
294 #define CONFIG_ENV_SECT_SIZE	0x10000
295 #endif
296 
297 #define CONFIG_OF_BOARD_SETUP
298 #define CONFIG_OF_STDOUT_VIA_ALIAS
299 #define CONFIG_CMD_BOOTZ
300 
301 #define CONFIG_MISC_INIT_R
302 
303 #include <asm/fsl_secure_boot.h>
304 
305 #endif
306