xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision a6ac775b)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2016 Freescale Semiconductor, Inc.
4  */
5 
6 #ifndef __CONFIG_H
7 #define __CONFIG_H
8 
9 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
10 
11 #define CONFIG_SYS_FSL_CLK
12 
13 /*
14  * Size of malloc() pool
15  */
16 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
17 
18 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
19 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
20 
21 #define CONFIG_SYS_CLK_FREQ		100000000
22 #define CONFIG_DDR_CLK_FREQ		100000000
23 
24 /*
25  * DDR: 800 MHz ( 1600 MT/s data rate )
26  */
27 
28 #define DDR_SDRAM_CFG			0x470c0008
29 #define DDR_CS0_BNDS			0x008000bf
30 #define DDR_CS0_CONFIG			0x80014302
31 #define DDR_TIMING_CFG_0		0x50550004
32 #define DDR_TIMING_CFG_1		0xbcb38c56
33 #define DDR_TIMING_CFG_2		0x0040d120
34 #define DDR_TIMING_CFG_3		0x010e1000
35 #define DDR_TIMING_CFG_4		0x00000001
36 #define DDR_TIMING_CFG_5		0x03401400
37 #define DDR_SDRAM_CFG_2			0x00401010
38 #define DDR_SDRAM_MODE			0x00061c60
39 #define DDR_SDRAM_MODE_2		0x00180000
40 #define DDR_SDRAM_INTERVAL		0x18600618
41 #define DDR_DDR_WRLVL_CNTL		0x8655f605
42 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
43 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
44 #define DDR_DDR_CDR1			0x80040000
45 #define DDR_DDR_CDR2			0x00000001
46 #define DDR_SDRAM_CLK_CNTL		0x02000000
47 #define DDR_DDR_ZQ_CNTL			0x89080600
48 #define DDR_CS0_CONFIG_2		0
49 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
50 #define SDRAM_CFG2_D_INIT		0x00000010
51 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
52 #define SDRAM_CFG2_FRC_SR		0x80000000
53 #define SDRAM_CFG_BI			0x00000001
54 
55 #ifdef CONFIG_RAMBOOT_PBL
56 #define CONFIG_SYS_FSL_PBL_PBI	\
57 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
58 #endif
59 
60 #ifdef CONFIG_SD_BOOT
61 #define CONFIG_SYS_FSL_PBL_RCW	\
62 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
63 #define CONFIG_SPL_LIBCOMMON_SUPPORT
64 #define CONFIG_SPL_LIBGENERIC_SUPPORT
65 #define CONFIG_SPL_ENV_SUPPORT
66 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
67 #define CONFIG_SPL_I2C_SUPPORT
68 #define CONFIG_SPL_WATCHDOG_SUPPORT
69 #define CONFIG_SPL_MMC_SUPPORT
70 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
71 
72 #define CONFIG_SPL_TEXT_BASE	0x10000000
73 #define CONFIG_SPL_MAX_SIZE		0x1a000
74 #define CONFIG_SPL_STACK		0x1001d000
75 #define CONFIG_SPL_PAD_TO		0x1c000
76 
77 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
78 		CONFIG_SYS_MONITOR_LEN)
79 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
80 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
81 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
82 #define CONFIG_SYS_MONITOR_LEN		0x80000
83 #endif
84 
85 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
86 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
87 
88 /*
89  * Serial Port
90  */
91 #define CONFIG_SYS_NS16550_SERIAL
92 #define CONFIG_SYS_NS16550_REG_SIZE	1
93 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
94 
95 /*
96  * I2C
97  */
98 #define CONFIG_CMD_I2C
99 #define CONFIG_SYS_I2C
100 #define CONFIG_SYS_I2C_MXC
101 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
102 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
103 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
104 
105 /* EEPROM */
106 #define CONFIG_ID_EEPROM
107 #define CONFIG_SYS_I2C_EEPROM_NXID
108 #define CONFIG_SYS_EEPROM_BUS_NUM		0
109 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
110 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
111 
112 /*
113  * MMC
114  */
115 #define CONFIG_CMD_MMC
116 
117 /* SATA */
118 #define CONFIG_SCSI_AHCI_PLAT
119 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
120 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
121 #endif
122 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
123 	PCI_DEVICE_ID_FREESCALE_AHCI}
124 
125 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
126 #define CONFIG_SYS_SCSI_MAX_LUN		1
127 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
128 		CONFIG_SYS_SCSI_MAX_LUN)
129 
130 /* SPI */
131 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
132 #define CONFIG_SPI_FLASH_SPANSION
133 
134 /* QSPI */
135 #define QSPI0_AMBA_BASE			0x40000000
136 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
137 #define FSL_QSPI_FLASH_NUM		2
138 #define CONFIG_SPI_FLASH_SPANSION
139 #endif
140 
141 /* DM SPI */
142 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
143 #define CONFIG_CMD_SF
144 #define CONFIG_DM_SPI_FLASH
145 #endif
146 
147 /*
148  * eTSEC
149  */
150 
151 #ifdef CONFIG_TSEC_ENET
152 #define CONFIG_MII_DEFAULT_TSEC		1
153 #define CONFIG_TSEC1			1
154 #define CONFIG_TSEC1_NAME		"eTSEC1"
155 #define CONFIG_TSEC2			1
156 #define CONFIG_TSEC2_NAME		"eTSEC2"
157 
158 #define TSEC1_PHY_ADDR			1
159 #define TSEC2_PHY_ADDR			3
160 
161 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
162 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
163 
164 #define TSEC1_PHYIDX			0
165 #define TSEC2_PHYIDX			0
166 
167 #define CONFIG_ETHPRIME			"eTSEC2"
168 
169 #define CONFIG_PHY_ATHEROS
170 
171 #define CONFIG_HAS_ETH0
172 #define CONFIG_HAS_ETH1
173 #define CONFIG_HAS_ETH2
174 #endif
175 
176 /* PCIe */
177 #define CONFIG_PCIE1		/* PCIE controler 1 */
178 #define CONFIG_PCIE2		/* PCIE controler 2 */
179 
180 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
181 
182 #ifdef CONFIG_PCI
183 #define CONFIG_PCI_SCAN_SHOW
184 #endif
185 
186 #define CONFIG_CMD_MII
187 
188 #define CONFIG_CMDLINE_TAG
189 
190 #define CONFIG_PEN_ADDR_BIG_ENDIAN
191 #define CONFIG_LAYERSCAPE_NS_ACCESS
192 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
193 #define COUNTER_FREQUENCY		12500000
194 
195 #define CONFIG_HWCONFIG
196 #define HWCONFIG_BUFFER_SIZE		256
197 
198 #define CONFIG_FSL_DEVICE_DISABLE
199 
200 #define CONFIG_EXTRA_ENV_SETTINGS	\
201 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
202 "initrd_high=0xffffffff\0"	\
203 "fdt_high=0xffffffff\0"
204 
205 /*
206  * Miscellaneous configurable options
207  */
208 #define CONFIG_CMD_GREPENV
209 #define CONFIG_CMD_MEMINFO
210 
211 #define CONFIG_SYS_LOAD_ADDR		0x82000000
212 
213 #define CONFIG_LS102XA_STREAM_ID
214 
215 #define CONFIG_SYS_INIT_SP_OFFSET \
216 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
217 #define CONFIG_SYS_INIT_SP_ADDR \
218 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
219 
220 #ifdef CONFIG_SPL_BUILD
221 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
222 #else
223 /* start of monitor */
224 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
225 #endif
226 
227 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
228 
229 /*
230  * Environment
231  */
232 
233 #define CONFIG_ENV_OVERWRITE
234 
235 #if defined(CONFIG_SD_BOOT)
236 #define CONFIG_ENV_OFFSET		0x100000
237 #define CONFIG_SYS_MMC_ENV_DEV	0
238 #define CONFIG_ENV_SIZE			0x2000
239 #elif defined(CONFIG_QSPI_BOOT)
240 #define CONFIG_ENV_SIZE			0x2000
241 #define CONFIG_ENV_OFFSET		0x100000
242 #define CONFIG_ENV_SECT_SIZE	0x10000
243 #endif
244 
245 #define CONFIG_OF_BOARD_SETUP
246 #define CONFIG_OF_STDOUT_VIA_ALIAS
247 
248 #include <asm/fsl_secure_boot.h>
249 
250 #endif
251