xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision 83ee44ab)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
11 
12 #define CONFIG_SYS_FSL_CLK
13 
14 /*
15  * Size of malloc() pool
16  */
17 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
18 
19 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
20 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
21 
22 /* XHCI Support - enabled by default */
23 #define CONFIG_HAS_FSL_XHCI_USB
24 
25 #ifdef CONFIG_HAS_FSL_XHCI_USB
26 #define CONFIG_USB_XHCI_FSL
27 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
28 #endif
29 
30 #define CONFIG_SYS_CLK_FREQ		100000000
31 #define CONFIG_DDR_CLK_FREQ		100000000
32 
33 /*
34  * DDR: 800 MHz ( 1600 MT/s data rate )
35  */
36 
37 #define DDR_SDRAM_CFG			0x470c0008
38 #define DDR_CS0_BNDS			0x008000bf
39 #define DDR_CS0_CONFIG			0x80014302
40 #define DDR_TIMING_CFG_0		0x50550004
41 #define DDR_TIMING_CFG_1		0xbcb38c56
42 #define DDR_TIMING_CFG_2		0x0040d120
43 #define DDR_TIMING_CFG_3		0x010e1000
44 #define DDR_TIMING_CFG_4		0x00000001
45 #define DDR_TIMING_CFG_5		0x03401400
46 #define DDR_SDRAM_CFG_2			0x00401010
47 #define DDR_SDRAM_MODE			0x00061c60
48 #define DDR_SDRAM_MODE_2		0x00180000
49 #define DDR_SDRAM_INTERVAL		0x18600618
50 #define DDR_DDR_WRLVL_CNTL		0x8655f605
51 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
52 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
53 #define DDR_DDR_CDR1			0x80040000
54 #define DDR_DDR_CDR2			0x00000001
55 #define DDR_SDRAM_CLK_CNTL		0x02000000
56 #define DDR_DDR_ZQ_CNTL			0x89080600
57 #define DDR_CS0_CONFIG_2		0
58 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
59 #define SDRAM_CFG2_D_INIT		0x00000010
60 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
61 #define SDRAM_CFG2_FRC_SR		0x80000000
62 #define SDRAM_CFG_BI			0x00000001
63 
64 #ifdef CONFIG_RAMBOOT_PBL
65 #define CONFIG_SYS_FSL_PBL_PBI	\
66 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
67 #endif
68 
69 #ifdef CONFIG_SD_BOOT
70 #define CONFIG_SYS_FSL_PBL_RCW	\
71 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
72 #define CONFIG_SPL_FRAMEWORK
73 #define CONFIG_SPL_LIBCOMMON_SUPPORT
74 #define CONFIG_SPL_LIBGENERIC_SUPPORT
75 #define CONFIG_SPL_ENV_SUPPORT
76 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
77 #define CONFIG_SPL_I2C_SUPPORT
78 #define CONFIG_SPL_WATCHDOG_SUPPORT
79 #define CONFIG_SPL_SERIAL_SUPPORT
80 #define CONFIG_SPL_MMC_SUPPORT
81 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
82 
83 #define CONFIG_SPL_TEXT_BASE	0x10000000
84 #define CONFIG_SPL_MAX_SIZE		0x1a000
85 #define CONFIG_SPL_STACK		0x1001d000
86 #define CONFIG_SPL_PAD_TO		0x1c000
87 #define CONFIG_SYS_TEXT_BASE	0x82000000
88 
89 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
90 		CONFIG_SYS_MONITOR_LEN)
91 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
92 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
93 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
94 #define CONFIG_SYS_MONITOR_LEN		0x80000
95 #endif
96 
97 #ifdef CONFIG_QSPI_BOOT
98 #define CONFIG_SYS_TEXT_BASE		0x40010000
99 #endif
100 
101 #define CONFIG_NR_DRAM_BANKS		1
102 
103 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
104 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
105 
106 /*
107  * Serial Port
108  */
109 #define CONFIG_CONS_INDEX		1
110 #define CONFIG_SYS_NS16550_SERIAL
111 #define CONFIG_SYS_NS16550_REG_SIZE	1
112 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
113 
114 /*
115  * I2C
116  */
117 #define CONFIG_CMD_I2C
118 #define CONFIG_SYS_I2C
119 #define CONFIG_SYS_I2C_MXC
120 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
121 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
122 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
123 
124 /* EEPROM */
125 #define CONFIG_ID_EEPROM
126 #define CONFIG_SYS_I2C_EEPROM_NXID
127 #define CONFIG_SYS_EEPROM_BUS_NUM		0
128 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
129 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
130 
131 /*
132  * MMC
133  */
134 #define CONFIG_CMD_MMC
135 #define CONFIG_FSL_ESDHC
136 
137 /* SATA */
138 #define CONFIG_LIBATA
139 #define CONFIG_SCSI_AHCI
140 #define CONFIG_SCSI_AHCI_PLAT
141 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
142 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
143 #endif
144 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
145 	PCI_DEVICE_ID_FREESCALE_AHCI}
146 
147 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
148 #define CONFIG_SYS_SCSI_MAX_LUN		1
149 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
150 		CONFIG_SYS_SCSI_MAX_LUN)
151 
152 /* SPI */
153 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
154 #define CONFIG_SPI_FLASH_SPANSION
155 
156 /* QSPI */
157 #define QSPI0_AMBA_BASE			0x40000000
158 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
159 #define FSL_QSPI_FLASH_NUM		2
160 #define CONFIG_SPI_FLASH_BAR
161 #define CONFIG_SPI_FLASH_SPANSION
162 #endif
163 
164 /* DM SPI */
165 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
166 #define CONFIG_CMD_SF
167 #define CONFIG_DM_SPI_FLASH
168 #endif
169 
170 /*
171  * eTSEC
172  */
173 #define CONFIG_TSEC_ENET
174 
175 #ifdef CONFIG_TSEC_ENET
176 #define CONFIG_MII
177 #define CONFIG_MII_DEFAULT_TSEC		1
178 #define CONFIG_TSEC1			1
179 #define CONFIG_TSEC1_NAME		"eTSEC1"
180 #define CONFIG_TSEC2			1
181 #define CONFIG_TSEC2_NAME		"eTSEC2"
182 
183 #define TSEC1_PHY_ADDR			1
184 #define TSEC2_PHY_ADDR			3
185 
186 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
187 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
188 
189 #define TSEC1_PHYIDX			0
190 #define TSEC2_PHYIDX			0
191 
192 #define CONFIG_ETHPRIME			"eTSEC2"
193 
194 #define CONFIG_PHY_ATHEROS
195 
196 #define CONFIG_HAS_ETH0
197 #define CONFIG_HAS_ETH1
198 #define CONFIG_HAS_ETH2
199 #endif
200 
201 /* PCIe */
202 #define CONFIG_PCIE1		/* PCIE controler 1 */
203 #define CONFIG_PCIE2		/* PCIE controler 2 */
204 
205 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
206 
207 #ifdef CONFIG_PCI
208 #define CONFIG_PCI_SCAN_SHOW
209 #endif
210 
211 #define CONFIG_CMD_PING
212 #define CONFIG_CMD_DHCP
213 #define CONFIG_CMD_MII
214 
215 #define CONFIG_CMDLINE_TAG
216 #define CONFIG_CMDLINE_EDITING
217 
218 #define CONFIG_PEN_ADDR_BIG_ENDIAN
219 #define CONFIG_LAYERSCAPE_NS_ACCESS
220 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
221 #define COUNTER_FREQUENCY		12500000
222 
223 #define CONFIG_HWCONFIG
224 #define HWCONFIG_BUFFER_SIZE		256
225 
226 #define CONFIG_FSL_DEVICE_DISABLE
227 
228 #define CONFIG_EXTRA_ENV_SETTINGS	\
229 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
230 "initrd_high=0xffffffff\0"	\
231 "fdt_high=0xffffffff\0"
232 
233 /*
234  * Miscellaneous configurable options
235  */
236 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
237 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
238 #define CONFIG_AUTO_COMPLETE
239 
240 #define CONFIG_CMD_GREPENV
241 #define CONFIG_CMD_MEMINFO
242 
243 #define CONFIG_SYS_LOAD_ADDR		0x82000000
244 
245 #define CONFIG_LS102XA_STREAM_ID
246 
247 #define CONFIG_SYS_INIT_SP_OFFSET \
248 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
249 #define CONFIG_SYS_INIT_SP_ADDR \
250 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
251 
252 #ifdef CONFIG_SPL_BUILD
253 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
254 #else
255 /* start of monitor */
256 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
257 #endif
258 
259 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
260 
261 /*
262  * Environment
263  */
264 
265 #define CONFIG_ENV_OVERWRITE
266 
267 #if defined(CONFIG_SD_BOOT)
268 #define CONFIG_ENV_OFFSET		0x100000
269 #define CONFIG_SYS_MMC_ENV_DEV	0
270 #define CONFIG_ENV_SIZE			0x2000
271 #elif defined(CONFIG_QSPI_BOOT)
272 #define CONFIG_ENV_SIZE			0x2000
273 #define CONFIG_ENV_OFFSET		0x100000
274 #define CONFIG_ENV_SECT_SIZE	0x10000
275 #endif
276 
277 #define CONFIG_OF_BOARD_SETUP
278 #define CONFIG_OF_STDOUT_VIA_ALIAS
279 
280 #define CONFIG_MISC_INIT_R
281 
282 #include <asm/fsl_secure_boot.h>
283 
284 #endif
285