xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision 71b75644)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
11 
12 #define CONFIG_SYS_FSL_CLK
13 
14 /*
15  * Size of malloc() pool
16  */
17 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
18 
19 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
20 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
21 
22 #define CONFIG_SYS_CLK_FREQ		100000000
23 #define CONFIG_DDR_CLK_FREQ		100000000
24 
25 /*
26  * DDR: 800 MHz ( 1600 MT/s data rate )
27  */
28 
29 #define DDR_SDRAM_CFG			0x470c0008
30 #define DDR_CS0_BNDS			0x008000bf
31 #define DDR_CS0_CONFIG			0x80014302
32 #define DDR_TIMING_CFG_0		0x50550004
33 #define DDR_TIMING_CFG_1		0xbcb38c56
34 #define DDR_TIMING_CFG_2		0x0040d120
35 #define DDR_TIMING_CFG_3		0x010e1000
36 #define DDR_TIMING_CFG_4		0x00000001
37 #define DDR_TIMING_CFG_5		0x03401400
38 #define DDR_SDRAM_CFG_2			0x00401010
39 #define DDR_SDRAM_MODE			0x00061c60
40 #define DDR_SDRAM_MODE_2		0x00180000
41 #define DDR_SDRAM_INTERVAL		0x18600618
42 #define DDR_DDR_WRLVL_CNTL		0x8655f605
43 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
44 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
45 #define DDR_DDR_CDR1			0x80040000
46 #define DDR_DDR_CDR2			0x00000001
47 #define DDR_SDRAM_CLK_CNTL		0x02000000
48 #define DDR_DDR_ZQ_CNTL			0x89080600
49 #define DDR_CS0_CONFIG_2		0
50 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
51 #define SDRAM_CFG2_D_INIT		0x00000010
52 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
53 #define SDRAM_CFG2_FRC_SR		0x80000000
54 #define SDRAM_CFG_BI			0x00000001
55 
56 #ifdef CONFIG_RAMBOOT_PBL
57 #define CONFIG_SYS_FSL_PBL_PBI	\
58 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
59 #endif
60 
61 #ifdef CONFIG_SD_BOOT
62 #define CONFIG_SYS_FSL_PBL_RCW	\
63 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
64 #define CONFIG_SPL_LIBCOMMON_SUPPORT
65 #define CONFIG_SPL_LIBGENERIC_SUPPORT
66 #define CONFIG_SPL_ENV_SUPPORT
67 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
68 #define CONFIG_SPL_I2C_SUPPORT
69 #define CONFIG_SPL_WATCHDOG_SUPPORT
70 #define CONFIG_SPL_SERIAL_SUPPORT
71 #define CONFIG_SPL_MMC_SUPPORT
72 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
73 
74 #define CONFIG_SPL_TEXT_BASE	0x10000000
75 #define CONFIG_SPL_MAX_SIZE		0x1a000
76 #define CONFIG_SPL_STACK		0x1001d000
77 #define CONFIG_SPL_PAD_TO		0x1c000
78 
79 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
80 		CONFIG_SYS_MONITOR_LEN)
81 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
82 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
83 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
84 #define CONFIG_SYS_MONITOR_LEN		0x80000
85 #endif
86 
87 #define CONFIG_NR_DRAM_BANKS		1
88 
89 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
90 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
91 
92 /*
93  * Serial Port
94  */
95 #define CONFIG_SYS_NS16550_SERIAL
96 #define CONFIG_SYS_NS16550_REG_SIZE	1
97 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
98 
99 /*
100  * I2C
101  */
102 #define CONFIG_CMD_I2C
103 #define CONFIG_SYS_I2C
104 #define CONFIG_SYS_I2C_MXC
105 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
106 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
107 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
108 
109 /* EEPROM */
110 #define CONFIG_ID_EEPROM
111 #define CONFIG_SYS_I2C_EEPROM_NXID
112 #define CONFIG_SYS_EEPROM_BUS_NUM		0
113 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
115 
116 /*
117  * MMC
118  */
119 #define CONFIG_CMD_MMC
120 #define CONFIG_FSL_ESDHC
121 
122 /* SATA */
123 #define CONFIG_SCSI_AHCI_PLAT
124 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
125 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
126 #endif
127 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
128 	PCI_DEVICE_ID_FREESCALE_AHCI}
129 
130 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
131 #define CONFIG_SYS_SCSI_MAX_LUN		1
132 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
133 		CONFIG_SYS_SCSI_MAX_LUN)
134 
135 /* SPI */
136 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
137 #define CONFIG_SPI_FLASH_SPANSION
138 
139 /* QSPI */
140 #define QSPI0_AMBA_BASE			0x40000000
141 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
142 #define FSL_QSPI_FLASH_NUM		2
143 #define CONFIG_SPI_FLASH_BAR
144 #define CONFIG_SPI_FLASH_SPANSION
145 #endif
146 
147 /* DM SPI */
148 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
149 #define CONFIG_CMD_SF
150 #define CONFIG_DM_SPI_FLASH
151 #endif
152 
153 /*
154  * eTSEC
155  */
156 #define CONFIG_TSEC_ENET
157 
158 #ifdef CONFIG_TSEC_ENET
159 #define CONFIG_MII
160 #define CONFIG_MII_DEFAULT_TSEC		1
161 #define CONFIG_TSEC1			1
162 #define CONFIG_TSEC1_NAME		"eTSEC1"
163 #define CONFIG_TSEC2			1
164 #define CONFIG_TSEC2_NAME		"eTSEC2"
165 
166 #define TSEC1_PHY_ADDR			1
167 #define TSEC2_PHY_ADDR			3
168 
169 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
170 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
171 
172 #define TSEC1_PHYIDX			0
173 #define TSEC2_PHYIDX			0
174 
175 #define CONFIG_ETHPRIME			"eTSEC2"
176 
177 #define CONFIG_PHY_ATHEROS
178 
179 #define CONFIG_HAS_ETH0
180 #define CONFIG_HAS_ETH1
181 #define CONFIG_HAS_ETH2
182 #endif
183 
184 /* PCIe */
185 #define CONFIG_PCIE1		/* PCIE controler 1 */
186 #define CONFIG_PCIE2		/* PCIE controler 2 */
187 
188 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
189 
190 #ifdef CONFIG_PCI
191 #define CONFIG_PCI_SCAN_SHOW
192 #endif
193 
194 #define CONFIG_CMD_MII
195 
196 #define CONFIG_CMDLINE_TAG
197 
198 #define CONFIG_PEN_ADDR_BIG_ENDIAN
199 #define CONFIG_LAYERSCAPE_NS_ACCESS
200 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
201 #define COUNTER_FREQUENCY		12500000
202 
203 #define CONFIG_HWCONFIG
204 #define HWCONFIG_BUFFER_SIZE		256
205 
206 #define CONFIG_FSL_DEVICE_DISABLE
207 
208 #define CONFIG_EXTRA_ENV_SETTINGS	\
209 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
210 "initrd_high=0xffffffff\0"	\
211 "fdt_high=0xffffffff\0"
212 
213 /*
214  * Miscellaneous configurable options
215  */
216 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
217 
218 #define CONFIG_CMD_GREPENV
219 #define CONFIG_CMD_MEMINFO
220 
221 #define CONFIG_SYS_LOAD_ADDR		0x82000000
222 
223 #define CONFIG_LS102XA_STREAM_ID
224 
225 #define CONFIG_SYS_INIT_SP_OFFSET \
226 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
227 #define CONFIG_SYS_INIT_SP_ADDR \
228 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
229 
230 #ifdef CONFIG_SPL_BUILD
231 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
232 #else
233 /* start of monitor */
234 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
235 #endif
236 
237 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
238 
239 /*
240  * Environment
241  */
242 
243 #define CONFIG_ENV_OVERWRITE
244 
245 #if defined(CONFIG_SD_BOOT)
246 #define CONFIG_ENV_OFFSET		0x100000
247 #define CONFIG_SYS_MMC_ENV_DEV	0
248 #define CONFIG_ENV_SIZE			0x2000
249 #elif defined(CONFIG_QSPI_BOOT)
250 #define CONFIG_ENV_SIZE			0x2000
251 #define CONFIG_ENV_OFFSET		0x100000
252 #define CONFIG_ENV_SECT_SIZE	0x10000
253 #endif
254 
255 #define CONFIG_OF_BOARD_SETUP
256 #define CONFIG_OF_STDOUT_VIA_ALIAS
257 
258 #define CONFIG_MISC_INIT_R
259 
260 #include <asm/fsl_secure_boot.h>
261 
262 #endif
263