1 /* 2 * Copyright 2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 11 12 #define CONFIG_SYS_FSL_CLK 13 14 /* 15 * Size of malloc() pool 16 */ 17 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 18 19 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 20 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 21 22 /* XHCI Support - enabled by default */ 23 #define CONFIG_HAS_FSL_XHCI_USB 24 25 #ifdef CONFIG_HAS_FSL_XHCI_USB 26 #define CONFIG_USB_XHCI_FSL 27 #define CONFIG_USB_XHCI_DWC3 28 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 29 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 30 #endif 31 32 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) 33 #define CONFIG_USB_STORAGE 34 #define CONFIG_CMD_EXT2 35 #endif 36 37 #define CONFIG_SYS_CLK_FREQ 100000000 38 #define CONFIG_DDR_CLK_FREQ 100000000 39 40 /* 41 * DDR: 800 MHz ( 1600 MT/s data rate ) 42 */ 43 44 #define DDR_SDRAM_CFG 0x470c0008 45 #define DDR_CS0_BNDS 0x008000bf 46 #define DDR_CS0_CONFIG 0x80014302 47 #define DDR_TIMING_CFG_0 0x50550004 48 #define DDR_TIMING_CFG_1 0xbcb38c56 49 #define DDR_TIMING_CFG_2 0x0040d120 50 #define DDR_TIMING_CFG_3 0x010e1000 51 #define DDR_TIMING_CFG_4 0x00000001 52 #define DDR_TIMING_CFG_5 0x03401400 53 #define DDR_SDRAM_CFG_2 0x00401010 54 #define DDR_SDRAM_MODE 0x00061c60 55 #define DDR_SDRAM_MODE_2 0x00180000 56 #define DDR_SDRAM_INTERVAL 0x18600618 57 #define DDR_DDR_WRLVL_CNTL 0x8655f605 58 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 59 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 60 #define DDR_DDR_CDR1 0x80040000 61 #define DDR_DDR_CDR2 0x00000001 62 #define DDR_SDRAM_CLK_CNTL 0x02000000 63 #define DDR_DDR_ZQ_CNTL 0x89080600 64 #define DDR_CS0_CONFIG_2 0 65 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 66 #define SDRAM_CFG2_D_INIT 0x00000010 67 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 68 #define SDRAM_CFG2_FRC_SR 0x80000000 69 #define SDRAM_CFG_BI 0x00000001 70 71 #ifdef CONFIG_RAMBOOT_PBL 72 #define CONFIG_SYS_FSL_PBL_PBI \ 73 board/freescale/ls1021aiot/ls102xa_pbi.cfg 74 #endif 75 76 #ifdef CONFIG_SD_BOOT 77 #define CONFIG_SYS_FSL_PBL_RCW \ 78 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg 79 #define CONFIG_SPL_FRAMEWORK 80 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 81 #define CONFIG_SPL_LIBCOMMON_SUPPORT 82 #define CONFIG_SPL_LIBGENERIC_SUPPORT 83 #define CONFIG_SPL_ENV_SUPPORT 84 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 85 #define CONFIG_SPL_I2C_SUPPORT 86 #define CONFIG_SPL_WATCHDOG_SUPPORT 87 #define CONFIG_SPL_SERIAL_SUPPORT 88 #define CONFIG_SPL_MMC_SUPPORT 89 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 90 91 #define CONFIG_SPL_TEXT_BASE 0x10000000 92 #define CONFIG_SPL_MAX_SIZE 0x1a000 93 #define CONFIG_SPL_STACK 0x1001d000 94 #define CONFIG_SPL_PAD_TO 0x1c000 95 #define CONFIG_SYS_TEXT_BASE 0x82000000 96 97 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 98 CONFIG_SYS_MONITOR_LEN) 99 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 100 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 101 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 102 #define CONFIG_SYS_MONITOR_LEN 0x80000 103 #endif 104 105 #ifdef CONFIG_QSPI_BOOT 106 #define CONFIG_SYS_TEXT_BASE 0x40010000 107 #endif 108 109 #define CONFIG_NR_DRAM_BANKS 1 110 111 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 112 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 113 114 /* 115 * Serial Port 116 */ 117 #define CONFIG_CONS_INDEX 1 118 #define CONFIG_SYS_NS16550_SERIAL 119 #define CONFIG_SYS_NS16550_REG_SIZE 1 120 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 121 122 /* 123 * I2C 124 */ 125 #define CONFIG_CMD_I2C 126 #define CONFIG_SYS_I2C 127 #define CONFIG_SYS_I2C_MXC 128 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 129 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 130 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 131 132 /* EEPROM */ 133 #define CONFIG_ID_EEPROM 134 #define CONFIG_SYS_I2C_EEPROM_NXID 135 #define CONFIG_SYS_EEPROM_BUS_NUM 0 136 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 137 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 138 139 /* 140 * MMC 141 */ 142 #define CONFIG_CMD_MMC 143 #define CONFIG_FSL_ESDHC 144 145 /* SATA */ 146 #define CONFIG_CMD_SCSI 147 #define CONFIG_LIBATA 148 #define CONFIG_SCSI_AHCI 149 #define CONFIG_SCSI_AHCI_PLAT 150 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI 151 #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 152 #endif 153 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ 154 PCI_DEVICE_ID_FREESCALE_AHCI} 155 156 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 157 #define CONFIG_SYS_SCSI_MAX_LUN 1 158 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 159 CONFIG_SYS_SCSI_MAX_LUN) 160 161 #define CONFIG_CMD_FAT 162 163 /* SPI */ 164 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 165 #define CONFIG_SPI_FLASH_SPANSION 166 167 /* QSPI */ 168 #define QSPI0_AMBA_BASE 0x40000000 169 #define FSL_QSPI_FLASH_SIZE (1 << 24) 170 #define FSL_QSPI_FLASH_NUM 2 171 #define CONFIG_SPI_FLASH_BAR 172 #define CONFIG_SPI_FLASH_SPANSION 173 #endif 174 175 /* DM SPI */ 176 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 177 #define CONFIG_CMD_SF 178 #define CONFIG_DM_SPI_FLASH 179 #endif 180 181 /* 182 * eTSEC 183 */ 184 #define CONFIG_TSEC_ENET 185 186 #ifdef CONFIG_TSEC_ENET 187 #define CONFIG_MII 188 #define CONFIG_MII_DEFAULT_TSEC 1 189 #define CONFIG_TSEC1 1 190 #define CONFIG_TSEC1_NAME "eTSEC1" 191 #define CONFIG_TSEC2 1 192 #define CONFIG_TSEC2_NAME "eTSEC2" 193 194 #define TSEC1_PHY_ADDR 1 195 #define TSEC2_PHY_ADDR 3 196 197 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 198 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 199 200 #define TSEC1_PHYIDX 0 201 #define TSEC2_PHYIDX 0 202 203 #define CONFIG_ETHPRIME "eTSEC2" 204 205 #define CONFIG_PHY_GIGE 206 #define CONFIG_PHYLIB 207 #define CONFIG_PHY_ATHEROS 208 209 #define CONFIG_HAS_ETH0 210 #define CONFIG_HAS_ETH1 211 #define CONFIG_HAS_ETH2 212 #endif 213 214 /* PCIe */ 215 #define CONFIG_PCIE1 /* PCIE controler 1 */ 216 #define CONFIG_PCIE2 /* PCIE controler 2 */ 217 218 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 219 220 #ifdef CONFIG_PCI 221 #define CONFIG_PCI_SCAN_SHOW 222 #define CONFIG_CMD_PCI 223 #endif 224 225 #define CONFIG_CMD_PING 226 #define CONFIG_CMD_DHCP 227 #define CONFIG_CMD_MII 228 229 #define CONFIG_CMDLINE_TAG 230 #define CONFIG_CMDLINE_EDITING 231 232 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT) 233 #undef CONFIG_CMD_IMLS 234 #endif 235 236 #define CONFIG_PEN_ADDR_BIG_ENDIAN 237 #define CONFIG_LAYERSCAPE_NS_ACCESS 238 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 239 #define COUNTER_FREQUENCY 12500000 240 241 #define CONFIG_HWCONFIG 242 #define HWCONFIG_BUFFER_SIZE 256 243 244 #define CONFIG_FSL_DEVICE_DISABLE 245 246 #define CONFIG_EXTRA_ENV_SETTINGS \ 247 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 248 "initrd_high=0xffffffff\0" \ 249 "fdt_high=0xffffffff\0" 250 251 /* 252 * Miscellaneous configurable options 253 */ 254 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 255 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 256 #define CONFIG_AUTO_COMPLETE 257 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 258 #define CONFIG_SYS_PBSIZE \ 259 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 260 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 261 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 262 263 #define CONFIG_CMD_GREPENV 264 #define CONFIG_CMD_MEMINFO 265 266 #define CONFIG_SYS_LOAD_ADDR 0x82000000 267 268 #define CONFIG_LS102XA_STREAM_ID 269 270 #define CONFIG_SYS_INIT_SP_OFFSET \ 271 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 272 #define CONFIG_SYS_INIT_SP_ADDR \ 273 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 274 275 #ifdef CONFIG_SPL_BUILD 276 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 277 #else 278 /* start of monitor */ 279 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 280 #endif 281 282 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 283 284 /* 285 * Environment 286 */ 287 288 #define CONFIG_ENV_OVERWRITE 289 290 #if defined(CONFIG_SD_BOOT) 291 #define CONFIG_ENV_OFFSET 0x100000 292 #define CONFIG_ENV_IS_IN_MMC 293 #define CONFIG_SYS_MMC_ENV_DEV 0 294 #define CONFIG_ENV_SIZE 0x2000 295 #elif defined(CONFIG_QSPI_BOOT) 296 #define CONFIG_ENV_IS_IN_SPI_FLASH 297 #define CONFIG_ENV_SIZE 0x2000 298 #define CONFIG_ENV_OFFSET 0x100000 299 #define CONFIG_ENV_SECT_SIZE 0x10000 300 #endif 301 302 #define CONFIG_OF_BOARD_SETUP 303 #define CONFIG_OF_STDOUT_VIA_ALIAS 304 #define CONFIG_CMD_BOOTZ 305 306 #define CONFIG_MISC_INIT_R 307 308 #include <asm/fsl_secure_boot.h> 309 310 #endif 311