xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision 557b9b72)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
11 
12 #define CONFIG_SYS_FSL_CLK
13 
14 /*
15  * Size of malloc() pool
16  */
17 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
18 
19 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
20 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
21 
22 /* XHCI Support - enabled by default */
23 #define CONFIG_HAS_FSL_XHCI_USB
24 
25 #ifdef CONFIG_HAS_FSL_XHCI_USB
26 #define CONFIG_USB_XHCI_FSL
27 #define CONFIG_USB_XHCI_DWC3
28 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
29 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
30 #endif
31 
32 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
33 #define CONFIG_USB_STORAGE
34 #define CONFIG_CMD_EXT2
35 #endif
36 
37 #define CONFIG_SYS_CLK_FREQ		100000000
38 #define CONFIG_DDR_CLK_FREQ		100000000
39 
40 /*
41  * DDR: 800 MHz ( 1600 MT/s data rate )
42  */
43 
44 #define DDR_SDRAM_CFG			0x470c0008
45 #define DDR_CS0_BNDS			0x008000bf
46 #define DDR_CS0_CONFIG			0x80014302
47 #define DDR_TIMING_CFG_0		0x50550004
48 #define DDR_TIMING_CFG_1		0xbcb38c56
49 #define DDR_TIMING_CFG_2		0x0040d120
50 #define DDR_TIMING_CFG_3		0x010e1000
51 #define DDR_TIMING_CFG_4		0x00000001
52 #define DDR_TIMING_CFG_5		0x03401400
53 #define DDR_SDRAM_CFG_2			0x00401010
54 #define DDR_SDRAM_MODE			0x00061c60
55 #define DDR_SDRAM_MODE_2		0x00180000
56 #define DDR_SDRAM_INTERVAL		0x18600618
57 #define DDR_DDR_WRLVL_CNTL		0x8655f605
58 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
59 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
60 #define DDR_DDR_CDR1			0x80040000
61 #define DDR_DDR_CDR2			0x00000001
62 #define DDR_SDRAM_CLK_CNTL		0x02000000
63 #define DDR_DDR_ZQ_CNTL			0x89080600
64 #define DDR_CS0_CONFIG_2		0
65 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
66 #define SDRAM_CFG2_D_INIT		0x00000010
67 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
68 #define SDRAM_CFG2_FRC_SR		0x80000000
69 #define SDRAM_CFG_BI			0x00000001
70 
71 #ifdef CONFIG_RAMBOOT_PBL
72 #define CONFIG_SYS_FSL_PBL_PBI	\
73 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
74 #endif
75 
76 #ifdef CONFIG_SD_BOOT
77 #define CONFIG_SYS_FSL_PBL_RCW	\
78 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
79 #define CONFIG_SPL_FRAMEWORK
80 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
81 #define CONFIG_SPL_LIBCOMMON_SUPPORT
82 #define CONFIG_SPL_LIBGENERIC_SUPPORT
83 #define CONFIG_SPL_ENV_SUPPORT
84 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
85 #define CONFIG_SPL_I2C_SUPPORT
86 #define CONFIG_SPL_WATCHDOG_SUPPORT
87 #define CONFIG_SPL_SERIAL_SUPPORT
88 #define CONFIG_SPL_MMC_SUPPORT
89 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
90 
91 #define CONFIG_SPL_TEXT_BASE	0x10000000
92 #define CONFIG_SPL_MAX_SIZE		0x1a000
93 #define CONFIG_SPL_STACK		0x1001d000
94 #define CONFIG_SPL_PAD_TO		0x1c000
95 #define CONFIG_SYS_TEXT_BASE	0x82000000
96 
97 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
98 		CONFIG_SYS_MONITOR_LEN)
99 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
100 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
101 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
102 #define CONFIG_SYS_MONITOR_LEN		0x80000
103 #endif
104 
105 #ifdef CONFIG_QSPI_BOOT
106 #define CONFIG_SYS_TEXT_BASE		0x40010000
107 #endif
108 
109 #define CONFIG_NR_DRAM_BANKS		1
110 
111 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
112 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
113 
114 /*
115  * Serial Port
116  */
117 #define CONFIG_CONS_INDEX		1
118 #define CONFIG_SYS_NS16550_SERIAL
119 #define CONFIG_SYS_NS16550_REG_SIZE	1
120 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
121 
122 /*
123  * I2C
124  */
125 #define CONFIG_CMD_I2C
126 #define CONFIG_SYS_I2C
127 #define CONFIG_SYS_I2C_MXC
128 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
129 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
130 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
131 
132 /* EEPROM */
133 #define CONFIG_ID_EEPROM
134 #define CONFIG_SYS_I2C_EEPROM_NXID
135 #define CONFIG_SYS_EEPROM_BUS_NUM		0
136 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
137 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
138 
139 /*
140  * MMC
141  */
142 #define CONFIG_CMD_MMC
143 #define CONFIG_FSL_ESDHC
144 
145 /* SATA */
146 #define CONFIG_CMD_SCSI
147 #define CONFIG_LIBATA
148 #define CONFIG_SCSI_AHCI
149 #define CONFIG_SCSI_AHCI_PLAT
150 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
151 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
152 #endif
153 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
154 	PCI_DEVICE_ID_FREESCALE_AHCI}
155 
156 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
157 #define CONFIG_SYS_SCSI_MAX_LUN		1
158 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
159 		CONFIG_SYS_SCSI_MAX_LUN)
160 
161 /* SPI */
162 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
163 #define CONFIG_SPI_FLASH_SPANSION
164 
165 /* QSPI */
166 #define QSPI0_AMBA_BASE			0x40000000
167 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
168 #define FSL_QSPI_FLASH_NUM		2
169 #define CONFIG_SPI_FLASH_BAR
170 #define CONFIG_SPI_FLASH_SPANSION
171 #endif
172 
173 /* DM SPI */
174 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
175 #define CONFIG_CMD_SF
176 #define CONFIG_DM_SPI_FLASH
177 #endif
178 
179 /*
180  * eTSEC
181  */
182 #define CONFIG_TSEC_ENET
183 
184 #ifdef CONFIG_TSEC_ENET
185 #define CONFIG_MII
186 #define CONFIG_MII_DEFAULT_TSEC		1
187 #define CONFIG_TSEC1			1
188 #define CONFIG_TSEC1_NAME		"eTSEC1"
189 #define CONFIG_TSEC2			1
190 #define CONFIG_TSEC2_NAME		"eTSEC2"
191 
192 #define TSEC1_PHY_ADDR			1
193 #define TSEC2_PHY_ADDR			3
194 
195 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
196 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
197 
198 #define TSEC1_PHYIDX			0
199 #define TSEC2_PHYIDX			0
200 
201 #define CONFIG_ETHPRIME			"eTSEC2"
202 
203 #define CONFIG_PHY_GIGE
204 #define CONFIG_PHYLIB
205 #define CONFIG_PHY_ATHEROS
206 
207 #define CONFIG_HAS_ETH0
208 #define CONFIG_HAS_ETH1
209 #define CONFIG_HAS_ETH2
210 #endif
211 
212 /* PCIe */
213 #define CONFIG_PCIE1		/* PCIE controler 1 */
214 #define CONFIG_PCIE2		/* PCIE controler 2 */
215 
216 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
217 
218 #ifdef CONFIG_PCI
219 #define CONFIG_PCI_SCAN_SHOW
220 #define CONFIG_CMD_PCI
221 #endif
222 
223 #define CONFIG_CMD_PING
224 #define CONFIG_CMD_DHCP
225 #define CONFIG_CMD_MII
226 
227 #define CONFIG_CMDLINE_TAG
228 #define CONFIG_CMDLINE_EDITING
229 
230 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
231 #undef	CONFIG_CMD_IMLS
232 #endif
233 
234 #define CONFIG_PEN_ADDR_BIG_ENDIAN
235 #define CONFIG_LAYERSCAPE_NS_ACCESS
236 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
237 #define COUNTER_FREQUENCY		12500000
238 
239 #define CONFIG_HWCONFIG
240 #define HWCONFIG_BUFFER_SIZE		256
241 
242 #define CONFIG_FSL_DEVICE_DISABLE
243 
244 #define CONFIG_EXTRA_ENV_SETTINGS	\
245 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
246 "initrd_high=0xffffffff\0"	\
247 "fdt_high=0xffffffff\0"
248 
249 /*
250  * Miscellaneous configurable options
251  */
252 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
253 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
254 #define CONFIG_AUTO_COMPLETE
255 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
256 #define CONFIG_SYS_PBSIZE		\
257 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
258 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
259 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
260 
261 #define CONFIG_CMD_GREPENV
262 #define CONFIG_CMD_MEMINFO
263 
264 #define CONFIG_SYS_LOAD_ADDR		0x82000000
265 
266 #define CONFIG_LS102XA_STREAM_ID
267 
268 #define CONFIG_SYS_INIT_SP_OFFSET \
269 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
270 #define CONFIG_SYS_INIT_SP_ADDR \
271 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
272 
273 #ifdef CONFIG_SPL_BUILD
274 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
275 #else
276 /* start of monitor */
277 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
278 #endif
279 
280 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
281 
282 /*
283  * Environment
284  */
285 
286 #define CONFIG_ENV_OVERWRITE
287 
288 #if defined(CONFIG_SD_BOOT)
289 #define CONFIG_ENV_OFFSET		0x100000
290 #define CONFIG_SYS_MMC_ENV_DEV	0
291 #define CONFIG_ENV_SIZE			0x2000
292 #elif defined(CONFIG_QSPI_BOOT)
293 #define CONFIG_ENV_SIZE			0x2000
294 #define CONFIG_ENV_OFFSET		0x100000
295 #define CONFIG_ENV_SECT_SIZE	0x10000
296 #endif
297 
298 #define CONFIG_OF_BOARD_SETUP
299 #define CONFIG_OF_STDOUT_VIA_ALIAS
300 #define CONFIG_CMD_BOOTZ
301 
302 #define CONFIG_MISC_INIT_R
303 
304 #include <asm/fsl_secure_boot.h>
305 
306 #endif
307