1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor, Inc. 4 */ 5 6 #ifndef __CONFIG_H 7 #define __CONFIG_H 8 9 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR 10 11 #define CONFIG_SYS_FSL_CLK 12 13 /* 14 * Size of malloc() pool 15 */ 16 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) 17 18 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR 19 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE 20 21 #define CONFIG_SYS_CLK_FREQ 100000000 22 #define CONFIG_DDR_CLK_FREQ 100000000 23 24 /* 25 * DDR: 800 MHz ( 1600 MT/s data rate ) 26 */ 27 28 #define DDR_SDRAM_CFG 0x470c0008 29 #define DDR_CS0_BNDS 0x008000bf 30 #define DDR_CS0_CONFIG 0x80014302 31 #define DDR_TIMING_CFG_0 0x50550004 32 #define DDR_TIMING_CFG_1 0xbcb38c56 33 #define DDR_TIMING_CFG_2 0x0040d120 34 #define DDR_TIMING_CFG_3 0x010e1000 35 #define DDR_TIMING_CFG_4 0x00000001 36 #define DDR_TIMING_CFG_5 0x03401400 37 #define DDR_SDRAM_CFG_2 0x00401010 38 #define DDR_SDRAM_MODE 0x00061c60 39 #define DDR_SDRAM_MODE_2 0x00180000 40 #define DDR_SDRAM_INTERVAL 0x18600618 41 #define DDR_DDR_WRLVL_CNTL 0x8655f605 42 #define DDR_DDR_WRLVL_CNTL_2 0x05060607 43 #define DDR_DDR_WRLVL_CNTL_3 0x05050505 44 #define DDR_DDR_CDR1 0x80040000 45 #define DDR_DDR_CDR2 0x00000001 46 #define DDR_SDRAM_CLK_CNTL 0x02000000 47 #define DDR_DDR_ZQ_CNTL 0x89080600 48 #define DDR_CS0_CONFIG_2 0 49 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 50 #define SDRAM_CFG2_D_INIT 0x00000010 51 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 52 #define SDRAM_CFG2_FRC_SR 0x80000000 53 #define SDRAM_CFG_BI 0x00000001 54 55 #ifdef CONFIG_RAMBOOT_PBL 56 #define CONFIG_SYS_FSL_PBL_PBI \ 57 board/freescale/ls1021aiot/ls102xa_pbi.cfg 58 #endif 59 60 #ifdef CONFIG_SD_BOOT 61 #define CONFIG_SYS_FSL_PBL_RCW \ 62 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg 63 #define CONFIG_SPL_LIBCOMMON_SUPPORT 64 #define CONFIG_SPL_LIBGENERIC_SUPPORT 65 #define CONFIG_SPL_ENV_SUPPORT 66 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 67 #define CONFIG_SPL_I2C_SUPPORT 68 #define CONFIG_SPL_WATCHDOG_SUPPORT 69 #define CONFIG_SPL_MMC_SUPPORT 70 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 71 72 #define CONFIG_SPL_TEXT_BASE 0x10000000 73 #define CONFIG_SPL_MAX_SIZE 0x1a000 74 #define CONFIG_SPL_STACK 0x1001d000 75 #define CONFIG_SPL_PAD_TO 0x1c000 76 77 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ 78 CONFIG_SYS_MONITOR_LEN) 79 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 80 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 81 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 82 #define CONFIG_SYS_MONITOR_LEN 0x80000 83 #endif 84 85 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL 86 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 87 88 /* 89 * Serial Port 90 */ 91 #define CONFIG_SYS_NS16550_SERIAL 92 #define CONFIG_SYS_NS16550_REG_SIZE 1 93 #define CONFIG_SYS_NS16550_CLK get_serial_clock() 94 95 /* 96 * I2C 97 */ 98 #define CONFIG_CMD_I2C 99 #define CONFIG_SYS_I2C 100 #define CONFIG_SYS_I2C_MXC 101 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 102 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 103 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 104 105 /* EEPROM */ 106 #define CONFIG_ID_EEPROM 107 #define CONFIG_SYS_I2C_EEPROM_NXID 108 #define CONFIG_SYS_EEPROM_BUS_NUM 0 109 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 110 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 111 112 /* 113 * MMC 114 */ 115 #define CONFIG_CMD_MMC 116 117 /* SATA */ 118 #define CONFIG_SCSI_AHCI_PLAT 119 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI 120 #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 121 #endif 122 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ 123 PCI_DEVICE_ID_FREESCALE_AHCI} 124 125 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 126 #define CONFIG_SYS_SCSI_MAX_LUN 1 127 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 128 CONFIG_SYS_SCSI_MAX_LUN) 129 130 /* SPI */ 131 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 132 #define CONFIG_SPI_FLASH_SPANSION 133 134 /* QSPI */ 135 #define QSPI0_AMBA_BASE 0x40000000 136 #define FSL_QSPI_FLASH_SIZE (1 << 24) 137 #define FSL_QSPI_FLASH_NUM 2 138 #define CONFIG_SPI_FLASH_BAR 139 #define CONFIG_SPI_FLASH_SPANSION 140 #endif 141 142 /* DM SPI */ 143 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) 144 #define CONFIG_CMD_SF 145 #define CONFIG_DM_SPI_FLASH 146 #endif 147 148 /* 149 * eTSEC 150 */ 151 152 #ifdef CONFIG_TSEC_ENET 153 #define CONFIG_MII_DEFAULT_TSEC 1 154 #define CONFIG_TSEC1 1 155 #define CONFIG_TSEC1_NAME "eTSEC1" 156 #define CONFIG_TSEC2 1 157 #define CONFIG_TSEC2_NAME "eTSEC2" 158 159 #define TSEC1_PHY_ADDR 1 160 #define TSEC2_PHY_ADDR 3 161 162 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 163 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 164 165 #define TSEC1_PHYIDX 0 166 #define TSEC2_PHYIDX 0 167 168 #define CONFIG_ETHPRIME "eTSEC2" 169 170 #define CONFIG_PHY_ATHEROS 171 172 #define CONFIG_HAS_ETH0 173 #define CONFIG_HAS_ETH1 174 #define CONFIG_HAS_ETH2 175 #endif 176 177 /* PCIe */ 178 #define CONFIG_PCIE1 /* PCIE controler 1 */ 179 #define CONFIG_PCIE2 /* PCIE controler 2 */ 180 181 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" 182 183 #ifdef CONFIG_PCI 184 #define CONFIG_PCI_SCAN_SHOW 185 #endif 186 187 #define CONFIG_CMD_MII 188 189 #define CONFIG_CMDLINE_TAG 190 191 #define CONFIG_PEN_ADDR_BIG_ENDIAN 192 #define CONFIG_LAYERSCAPE_NS_ACCESS 193 #define CONFIG_SMP_PEN_ADDR 0x01ee0200 194 #define COUNTER_FREQUENCY 12500000 195 196 #define CONFIG_HWCONFIG 197 #define HWCONFIG_BUFFER_SIZE 256 198 199 #define CONFIG_FSL_DEVICE_DISABLE 200 201 #define CONFIG_EXTRA_ENV_SETTINGS \ 202 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ 203 "initrd_high=0xffffffff\0" \ 204 "fdt_high=0xffffffff\0" 205 206 /* 207 * Miscellaneous configurable options 208 */ 209 #define CONFIG_CMD_GREPENV 210 #define CONFIG_CMD_MEMINFO 211 212 #define CONFIG_SYS_LOAD_ADDR 0x82000000 213 214 #define CONFIG_LS102XA_STREAM_ID 215 216 #define CONFIG_SYS_INIT_SP_OFFSET \ 217 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 218 #define CONFIG_SYS_INIT_SP_ADDR \ 219 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 220 221 #ifdef CONFIG_SPL_BUILD 222 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 223 #else 224 /* start of monitor */ 225 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 226 #endif 227 228 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 229 230 /* 231 * Environment 232 */ 233 234 #define CONFIG_ENV_OVERWRITE 235 236 #if defined(CONFIG_SD_BOOT) 237 #define CONFIG_ENV_OFFSET 0x100000 238 #define CONFIG_SYS_MMC_ENV_DEV 0 239 #define CONFIG_ENV_SIZE 0x2000 240 #elif defined(CONFIG_QSPI_BOOT) 241 #define CONFIG_ENV_SIZE 0x2000 242 #define CONFIG_ENV_OFFSET 0x100000 243 #define CONFIG_ENV_SECT_SIZE 0x10000 244 #endif 245 246 #define CONFIG_OF_BOARD_SETUP 247 #define CONFIG_OF_STDOUT_VIA_ALIAS 248 249 #include <asm/fsl_secure_boot.h> 250 251 #endif 252