xref: /openbmc/u-boot/include/configs/ls1021aiot.h (revision 470dd6cc)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
11 
12 #define CONFIG_SYS_FSL_CLK
13 
14 /*
15  * Size of malloc() pool
16  */
17 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
18 
19 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
20 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
21 
22 #define CONFIG_SYS_CLK_FREQ		100000000
23 #define CONFIG_DDR_CLK_FREQ		100000000
24 
25 /*
26  * DDR: 800 MHz ( 1600 MT/s data rate )
27  */
28 
29 #define DDR_SDRAM_CFG			0x470c0008
30 #define DDR_CS0_BNDS			0x008000bf
31 #define DDR_CS0_CONFIG			0x80014302
32 #define DDR_TIMING_CFG_0		0x50550004
33 #define DDR_TIMING_CFG_1		0xbcb38c56
34 #define DDR_TIMING_CFG_2		0x0040d120
35 #define DDR_TIMING_CFG_3		0x010e1000
36 #define DDR_TIMING_CFG_4		0x00000001
37 #define DDR_TIMING_CFG_5		0x03401400
38 #define DDR_SDRAM_CFG_2			0x00401010
39 #define DDR_SDRAM_MODE			0x00061c60
40 #define DDR_SDRAM_MODE_2		0x00180000
41 #define DDR_SDRAM_INTERVAL		0x18600618
42 #define DDR_DDR_WRLVL_CNTL		0x8655f605
43 #define DDR_DDR_WRLVL_CNTL_2	0x05060607
44 #define DDR_DDR_WRLVL_CNTL_3	0x05050505
45 #define DDR_DDR_CDR1			0x80040000
46 #define DDR_DDR_CDR2			0x00000001
47 #define DDR_SDRAM_CLK_CNTL		0x02000000
48 #define DDR_DDR_ZQ_CNTL			0x89080600
49 #define DDR_CS0_CONFIG_2		0
50 #define DDR_SDRAM_CFG_MEM_EN	0x80000000
51 #define SDRAM_CFG2_D_INIT		0x00000010
52 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
53 #define SDRAM_CFG2_FRC_SR		0x80000000
54 #define SDRAM_CFG_BI			0x00000001
55 
56 #ifdef CONFIG_RAMBOOT_PBL
57 #define CONFIG_SYS_FSL_PBL_PBI	\
58 	board/freescale/ls1021aiot/ls102xa_pbi.cfg
59 #endif
60 
61 #ifdef CONFIG_SD_BOOT
62 #define CONFIG_SYS_FSL_PBL_RCW	\
63 	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
64 #define CONFIG_SPL_FRAMEWORK
65 #define CONFIG_SPL_LIBCOMMON_SUPPORT
66 #define CONFIG_SPL_LIBGENERIC_SUPPORT
67 #define CONFIG_SPL_ENV_SUPPORT
68 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
69 #define CONFIG_SPL_I2C_SUPPORT
70 #define CONFIG_SPL_WATCHDOG_SUPPORT
71 #define CONFIG_SPL_SERIAL_SUPPORT
72 #define CONFIG_SPL_MMC_SUPPORT
73 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
74 
75 #define CONFIG_SPL_TEXT_BASE	0x10000000
76 #define CONFIG_SPL_MAX_SIZE		0x1a000
77 #define CONFIG_SPL_STACK		0x1001d000
78 #define CONFIG_SPL_PAD_TO		0x1c000
79 #define CONFIG_SYS_TEXT_BASE	0x82000000
80 
81 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
82 		CONFIG_SYS_MONITOR_LEN)
83 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
84 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
85 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
86 #define CONFIG_SYS_MONITOR_LEN		0x80000
87 #endif
88 
89 #ifdef CONFIG_QSPI_BOOT
90 #define CONFIG_SYS_TEXT_BASE		0x40010000
91 #endif
92 
93 #define CONFIG_NR_DRAM_BANKS		1
94 
95 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
96 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
97 
98 /*
99  * Serial Port
100  */
101 #define CONFIG_CONS_INDEX		1
102 #define CONFIG_SYS_NS16550_SERIAL
103 #define CONFIG_SYS_NS16550_REG_SIZE	1
104 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
105 
106 /*
107  * I2C
108  */
109 #define CONFIG_CMD_I2C
110 #define CONFIG_SYS_I2C
111 #define CONFIG_SYS_I2C_MXC
112 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
113 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
114 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
115 
116 /* EEPROM */
117 #define CONFIG_ID_EEPROM
118 #define CONFIG_SYS_I2C_EEPROM_NXID
119 #define CONFIG_SYS_EEPROM_BUS_NUM		0
120 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
121 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
122 
123 /*
124  * MMC
125  */
126 #define CONFIG_CMD_MMC
127 #define CONFIG_FSL_ESDHC
128 
129 /* SATA */
130 #define CONFIG_LIBATA
131 #define CONFIG_SCSI_AHCI
132 #define CONFIG_SCSI_AHCI_PLAT
133 #ifndef PCI_DEVICE_ID_FREESCALE_AHCI
134 #define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
135 #endif
136 #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
137 	PCI_DEVICE_ID_FREESCALE_AHCI}
138 
139 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
140 #define CONFIG_SYS_SCSI_MAX_LUN		1
141 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
142 		CONFIG_SYS_SCSI_MAX_LUN)
143 
144 /* SPI */
145 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
146 #define CONFIG_SPI_FLASH_SPANSION
147 
148 /* QSPI */
149 #define QSPI0_AMBA_BASE			0x40000000
150 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
151 #define FSL_QSPI_FLASH_NUM		2
152 #define CONFIG_SPI_FLASH_BAR
153 #define CONFIG_SPI_FLASH_SPANSION
154 #endif
155 
156 /* DM SPI */
157 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
158 #define CONFIG_CMD_SF
159 #define CONFIG_DM_SPI_FLASH
160 #endif
161 
162 /*
163  * eTSEC
164  */
165 #define CONFIG_TSEC_ENET
166 
167 #ifdef CONFIG_TSEC_ENET
168 #define CONFIG_MII
169 #define CONFIG_MII_DEFAULT_TSEC		1
170 #define CONFIG_TSEC1			1
171 #define CONFIG_TSEC1_NAME		"eTSEC1"
172 #define CONFIG_TSEC2			1
173 #define CONFIG_TSEC2_NAME		"eTSEC2"
174 
175 #define TSEC1_PHY_ADDR			1
176 #define TSEC2_PHY_ADDR			3
177 
178 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
179 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
180 
181 #define TSEC1_PHYIDX			0
182 #define TSEC2_PHYIDX			0
183 
184 #define CONFIG_ETHPRIME			"eTSEC2"
185 
186 #define CONFIG_PHY_ATHEROS
187 
188 #define CONFIG_HAS_ETH0
189 #define CONFIG_HAS_ETH1
190 #define CONFIG_HAS_ETH2
191 #endif
192 
193 /* PCIe */
194 #define CONFIG_PCIE1		/* PCIE controler 1 */
195 #define CONFIG_PCIE2		/* PCIE controler 2 */
196 
197 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
198 
199 #ifdef CONFIG_PCI
200 #define CONFIG_PCI_SCAN_SHOW
201 #endif
202 
203 #define CONFIG_CMD_PING
204 #define CONFIG_CMD_DHCP
205 #define CONFIG_CMD_MII
206 
207 #define CONFIG_CMDLINE_TAG
208 #define CONFIG_CMDLINE_EDITING
209 
210 #define CONFIG_PEN_ADDR_BIG_ENDIAN
211 #define CONFIG_LAYERSCAPE_NS_ACCESS
212 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
213 #define COUNTER_FREQUENCY		12500000
214 
215 #define CONFIG_HWCONFIG
216 #define HWCONFIG_BUFFER_SIZE		256
217 
218 #define CONFIG_FSL_DEVICE_DISABLE
219 
220 #define CONFIG_EXTRA_ENV_SETTINGS	\
221 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
222 "initrd_high=0xffffffff\0"	\
223 "fdt_high=0xffffffff\0"
224 
225 /*
226  * Miscellaneous configurable options
227  */
228 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
229 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
230 #define CONFIG_AUTO_COMPLETE
231 
232 #define CONFIG_CMD_GREPENV
233 #define CONFIG_CMD_MEMINFO
234 
235 #define CONFIG_SYS_LOAD_ADDR		0x82000000
236 
237 #define CONFIG_LS102XA_STREAM_ID
238 
239 #define CONFIG_SYS_INIT_SP_OFFSET \
240 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
241 #define CONFIG_SYS_INIT_SP_ADDR \
242 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
243 
244 #ifdef CONFIG_SPL_BUILD
245 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
246 #else
247 /* start of monitor */
248 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
249 #endif
250 
251 #define CONFIG_SYS_QE_FW_ADDR	0x67f40000
252 
253 /*
254  * Environment
255  */
256 
257 #define CONFIG_ENV_OVERWRITE
258 
259 #if defined(CONFIG_SD_BOOT)
260 #define CONFIG_ENV_OFFSET		0x100000
261 #define CONFIG_SYS_MMC_ENV_DEV	0
262 #define CONFIG_ENV_SIZE			0x2000
263 #elif defined(CONFIG_QSPI_BOOT)
264 #define CONFIG_ENV_SIZE			0x2000
265 #define CONFIG_ENV_OFFSET		0x100000
266 #define CONFIG_ENV_SECT_SIZE	0x10000
267 #endif
268 
269 #define CONFIG_OF_BOARD_SETUP
270 #define CONFIG_OF_STDOUT_VIA_ALIAS
271 
272 #define CONFIG_MISC_INIT_R
273 
274 #include <asm/fsl_secure_boot.h>
275 
276 #endif
277