xref: /openbmc/u-boot/include/configs/ls1012ardb.h (revision 9702ec00)
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __LS1012ARDB_H__
8 #define __LS1012ARDB_H__
9 
10 #include "ls1012a_common.h"
11 
12 
13 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
14 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
15 #define CONFIG_NR_DRAM_BANKS		2
16 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
17 
18 #define CONFIG_SYS_MMDC_CORE_CONTROL_1		0x05180000
19 #define CONFIG_SYS_MMDC_CORE_CONTROL_2		0x85180000
20 
21 #define CONFIG_CMD_MEMINFO
22 #define CONFIG_CMD_MEMTEST
23 #define CONFIG_SYS_MEMTEST_START	0x80000000
24 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
25 
26 /*
27 * USB
28 */
29 #define CONFIG_HAS_FSL_XHCI_USB
30 
31 #ifdef CONFIG_HAS_FSL_XHCI_USB
32 #define CONFIG_USB_XHCI_FSL
33 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
34 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
35 #define CONFIG_USB_STORAGE
36 #endif
37 
38 /*
39  * I2C IO expander
40  */
41 
42 #define I2C_MUX_IO1_ADDR	0x24
43 #define __SW_BOOT_MASK		0xFC
44 #define __SW_BOOT_EMU		0x10
45 #define __SW_BOOT_BANK1		0x00
46 #define __SW_BOOT_BANK2		0x01
47 #define __SW_REV_MASK		0x07
48 #define __SW_REV_A		0xF8
49 #define __SW_REV_B		0xF0
50 
51 /*  MMC  */
52 #define CONFIG_MMC
53 #ifdef CONFIG_MMC
54 #define CONFIG_FSL_ESDHC
55 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
56 #define CONFIG_GENERIC_MMC
57 #define CONFIG_DOS_PARTITION
58 #endif
59 
60 /* SATA */
61 #define CONFIG_LIBATA
62 #define	CONFIG_SCSI
63 #define CONFIG_SCSI_AHCI
64 #define CONFIG_SCSI_AHCI_PLAT
65 #define CONFIG_CMD_SCSI
66 #define CONFIG_DOS_PARTITION
67 #define CONFIG_BOARD_LATE_INIT
68 
69 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
70 
71 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
72 #define CONFIG_SYS_SCSI_MAX_LUN			1
73 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
74 						CONFIG_SYS_SCSI_MAX_LUN)
75 #define CONFIG_PCI		/* Enable PCI/PCIE */
76 #define CONFIG_PCIE1		/* PCIE controller 1 */
77 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
78 #define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
79 
80 #define CONFIG_SYS_PCI_64BIT
81 
82 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
83 #define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
84 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
85 #define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
86 
87 #define CONFIG_SYS_PCIE_IO_BUS		0x00000000
88 #define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
89 #define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
90 
91 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
92 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
93 #define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
94 
95 #define CONFIG_NET_MULTI
96 #define CONFIG_PCI_PNP
97 #define CONFIG_PCI_SCAN_SHOW
98 #define CONFIG_CMD_PCI
99 
100 #define CONFIG_CMD_MEMINFO
101 #define CONFIG_CMD_MEMTEST
102 #define CONFIG_SYS_MEMTEST_START	0x80000000
103 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
104 
105 #endif /* __LS1012ARDB_H__ */
106