1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor, Inc. 4 */ 5 6 #ifndef __LS1012ARDB_H__ 7 #define __LS1012ARDB_H__ 8 9 #include "ls1012a_common.h" 10 11 /* DDR */ 12 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 13 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 14 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 15 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 16 #define CONFIG_CMD_MEMINFO 17 #define CONFIG_SYS_MEMTEST_START 0x80000000 18 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 19 20 #ifndef CONFIG_SPL_BUILD 21 #undef BOOT_TARGET_DEVICES 22 #define BOOT_TARGET_DEVICES(func) \ 23 func(USB, usb, 0) 24 #endif 25 26 #undef CONFIG_EXTRA_ENV_SETTINGS 27 #define CONFIG_EXTRA_ENV_SETTINGS \ 28 "verify=no\0" \ 29 "fdt_high=0xffffffffffffffff\0" \ 30 "initrd_high=0xffffffffffffffff\0" \ 31 "fdt_addr=0x00f00000\0" \ 32 "kernel_addr=0x01000000\0" \ 33 "scriptaddr=0x80000000\0" \ 34 "fdtheader_addr_r=0x80100000\0" \ 35 "kernelheader_addr_r=0x80200000\0" \ 36 "kernel_addr_r=0x96000000\0" \ 37 "fdt_addr_r=0x90000000\0" \ 38 "load_addr=0x96000000\0" \ 39 "kernel_size=0x2800000\0" \ 40 "console=ttyS0,115200\0" \ 41 BOOTENV \ 42 "boot_scripts=ls1012afrdm_boot.scr\0" \ 43 "scan_dev_for_boot_part=" \ 44 "part list ${devtype} ${devnum} devplist; " \ 45 "env exists devplist || setenv devplist 1; " \ 46 "for distro_bootpart in ${devplist}; do " \ 47 "if fstype ${devtype} " \ 48 "${devnum}:${distro_bootpart} " \ 49 "bootfstype; then " \ 50 "run scan_dev_for_boot; " \ 51 "fi; " \ 52 "done\0" \ 53 "scan_dev_for_boot=" \ 54 "echo Scanning ${devtype} " \ 55 "${devnum}:${distro_bootpart}...; " \ 56 "for prefix in ${boot_prefixes}; do " \ 57 "run scan_dev_for_scripts; " \ 58 "done;" \ 59 "\0" \ 60 "installer=load usb 0:2 $load_addr " \ 61 "/flex_installer_arm64.itb; " \ 62 "bootm $load_addr#$board\0" \ 63 "qspi_bootcmd=echo Trying load from qspi..;" \ 64 "sf probe && sf read $load_addr " \ 65 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" 66 67 #undef CONFIG_BOOTCOMMAND 68 #ifdef CONFIG_TFABOOT 69 #undef QSPI_NOR_BOOTCOMMAND 70 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" 71 #else 72 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" 73 #endif 74 75 #define CONFIG_CMD_MEMINFO 76 #define CONFIG_SYS_MEMTEST_START 0x80000000 77 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 78 79 #endif /* __LS1012ARDB_H__ */ 80