1 /* 2 * Copyright 2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1012ARDB_H__ 8 #define __LS1012ARDB_H__ 9 10 #include "ls1012a_common.h" 11 12 /* DDR */ 13 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 14 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 15 #define CONFIG_NR_DRAM_BANKS 2 16 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 17 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 18 #define CONFIG_CMD_MEMINFO 19 #define CONFIG_CMD_MEMTEST 20 #define CONFIG_SYS_MEMTEST_START 0x80000000 21 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 22 23 #ifndef CONFIG_SPL_BUILD 24 #undef BOOT_TARGET_DEVICES 25 #define BOOT_TARGET_DEVICES(func) \ 26 func(USB, usb, 0) 27 #endif 28 29 #undef CONFIG_EXTRA_ENV_SETTINGS 30 #define CONFIG_EXTRA_ENV_SETTINGS \ 31 "verify=no\0" \ 32 "fdt_high=0xffffffffffffffff\0" \ 33 "initrd_high=0xffffffffffffffff\0" \ 34 "fdt_addr=0x00f00000\0" \ 35 "kernel_addr=0x01000000\0" \ 36 "scriptaddr=0x80000000\0" \ 37 "fdtheader_addr_r=0x80100000\0" \ 38 "kernelheader_addr_r=0x80200000\0" \ 39 "kernel_addr_r=0x96000000\0" \ 40 "fdt_addr_r=0x90000000\0" \ 41 "load_addr=0x96000000\0" \ 42 "kernel_size=0x2800000\0" \ 43 "console=ttyS0,115200\0" \ 44 BOOTENV \ 45 "boot_scripts=ls1012afrdm_boot.scr\0" \ 46 "scan_dev_for_boot_part=" \ 47 "part list ${devtype} ${devnum} devplist; " \ 48 "env exists devplist || setenv devplist 1; " \ 49 "for distro_bootpart in ${devplist}; do " \ 50 "if fstype ${devtype} " \ 51 "${devnum}:${distro_bootpart} " \ 52 "bootfstype; then " \ 53 "run scan_dev_for_boot; " \ 54 "fi; " \ 55 "done\0" \ 56 "scan_dev_for_boot=" \ 57 "echo Scanning ${devtype} " \ 58 "${devnum}:${distro_bootpart}...; " \ 59 "for prefix in ${boot_prefixes}; do " \ 60 "run scan_dev_for_scripts; " \ 61 "done;" \ 62 "\0" \ 63 "installer=load usb 0:2 $load_addr " \ 64 "/flex_installer_arm64.itb; " \ 65 "bootm $load_addr#$board\0" \ 66 "qspi_bootcmd=echo Trying load from qspi..;" \ 67 "sf probe && sf read $load_addr " \ 68 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" 69 70 #undef CONFIG_BOOTCOMMAND 71 #define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" 72 73 #define CONFIG_CMD_MEMINFO 74 #define CONFIG_CMD_MEMTEST 75 #define CONFIG_SYS_MEMTEST_START 0x80000000 76 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 77 78 #endif /* __LS1012ARDB_H__ */ 79