1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor, Inc. 4 */ 5 6 #ifndef __LS1012ARDB_H__ 7 #define __LS1012ARDB_H__ 8 9 #include "ls1012a_common.h" 10 11 /* DDR */ 12 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 13 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 14 #define CONFIG_NR_DRAM_BANKS 2 15 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 16 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 17 #define CONFIG_CMD_MEMINFO 18 #define CONFIG_SYS_MEMTEST_START 0x80000000 19 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 20 21 #ifndef CONFIG_SPL_BUILD 22 #undef BOOT_TARGET_DEVICES 23 #define BOOT_TARGET_DEVICES(func) \ 24 func(USB, usb, 0) 25 #endif 26 27 #undef CONFIG_EXTRA_ENV_SETTINGS 28 #define CONFIG_EXTRA_ENV_SETTINGS \ 29 "verify=no\0" \ 30 "fdt_high=0xffffffffffffffff\0" \ 31 "initrd_high=0xffffffffffffffff\0" \ 32 "fdt_addr=0x00f00000\0" \ 33 "kernel_addr=0x01000000\0" \ 34 "scriptaddr=0x80000000\0" \ 35 "fdtheader_addr_r=0x80100000\0" \ 36 "kernelheader_addr_r=0x80200000\0" \ 37 "kernel_addr_r=0x96000000\0" \ 38 "fdt_addr_r=0x90000000\0" \ 39 "load_addr=0x96000000\0" \ 40 "kernel_size=0x2800000\0" \ 41 "console=ttyS0,115200\0" \ 42 BOOTENV \ 43 "boot_scripts=ls1012afrdm_boot.scr\0" \ 44 "scan_dev_for_boot_part=" \ 45 "part list ${devtype} ${devnum} devplist; " \ 46 "env exists devplist || setenv devplist 1; " \ 47 "for distro_bootpart in ${devplist}; do " \ 48 "if fstype ${devtype} " \ 49 "${devnum}:${distro_bootpart} " \ 50 "bootfstype; then " \ 51 "run scan_dev_for_boot; " \ 52 "fi; " \ 53 "done\0" \ 54 "scan_dev_for_boot=" \ 55 "echo Scanning ${devtype} " \ 56 "${devnum}:${distro_bootpart}...; " \ 57 "for prefix in ${boot_prefixes}; do " \ 58 "run scan_dev_for_scripts; " \ 59 "done;" \ 60 "\0" \ 61 "installer=load usb 0:2 $load_addr " \ 62 "/flex_installer_arm64.itb; " \ 63 "bootm $load_addr#$board\0" \ 64 "qspi_bootcmd=echo Trying load from qspi..;" \ 65 "sf probe && sf read $load_addr " \ 66 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" 67 68 #undef CONFIG_BOOTCOMMAND 69 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" 70 71 #define CONFIG_CMD_MEMINFO 72 #define CONFIG_SYS_MEMTEST_START 0x80000000 73 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 74 75 #endif /* __LS1012ARDB_H__ */ 76