1 /* 2 * Copyright 2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __LS1012ARDB_H__ 8 #define __LS1012ARDB_H__ 9 10 #include "ls1012a_common.h" 11 12 /* DDR */ 13 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 14 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 15 #define CONFIG_NR_DRAM_BANKS 2 16 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 17 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 18 #define CONFIG_CMD_MEMINFO 19 #define CONFIG_SYS_MEMTEST_START 0x80000000 20 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 21 22 #ifndef CONFIG_SPL_BUILD 23 #undef BOOT_TARGET_DEVICES 24 #define BOOT_TARGET_DEVICES(func) \ 25 func(USB, usb, 0) 26 #endif 27 28 #undef CONFIG_EXTRA_ENV_SETTINGS 29 #define CONFIG_EXTRA_ENV_SETTINGS \ 30 "verify=no\0" \ 31 "fdt_high=0xffffffffffffffff\0" \ 32 "initrd_high=0xffffffffffffffff\0" \ 33 "fdt_addr=0x00f00000\0" \ 34 "kernel_addr=0x01000000\0" \ 35 "scriptaddr=0x80000000\0" \ 36 "fdtheader_addr_r=0x80100000\0" \ 37 "kernelheader_addr_r=0x80200000\0" \ 38 "kernel_addr_r=0x96000000\0" \ 39 "fdt_addr_r=0x90000000\0" \ 40 "load_addr=0x96000000\0" \ 41 "kernel_size=0x2800000\0" \ 42 "console=ttyS0,115200\0" \ 43 BOOTENV \ 44 "boot_scripts=ls1012afrdm_boot.scr\0" \ 45 "scan_dev_for_boot_part=" \ 46 "part list ${devtype} ${devnum} devplist; " \ 47 "env exists devplist || setenv devplist 1; " \ 48 "for distro_bootpart in ${devplist}; do " \ 49 "if fstype ${devtype} " \ 50 "${devnum}:${distro_bootpart} " \ 51 "bootfstype; then " \ 52 "run scan_dev_for_boot; " \ 53 "fi; " \ 54 "done\0" \ 55 "scan_dev_for_boot=" \ 56 "echo Scanning ${devtype} " \ 57 "${devnum}:${distro_bootpart}...; " \ 58 "for prefix in ${boot_prefixes}; do " \ 59 "run scan_dev_for_scripts; " \ 60 "done;" \ 61 "\0" \ 62 "installer=load usb 0:2 $load_addr " \ 63 "/flex_installer_arm64.itb; " \ 64 "bootm $load_addr#$board\0" \ 65 "qspi_bootcmd=echo Trying load from qspi..;" \ 66 "sf probe && sf read $load_addr " \ 67 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" 68 69 #undef CONFIG_BOOTCOMMAND 70 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" 71 72 #define CONFIG_CMD_MEMINFO 73 #define CONFIG_SYS_MEMTEST_START 0x80000000 74 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 75 76 #endif /* __LS1012ARDB_H__ */ 77