1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2016 Freescale Semiconductor, Inc.
4  */
5 
6 #ifndef __LS1012ARDB_H__
7 #define __LS1012ARDB_H__
8 
9 #include "ls1012a_common.h"
10 
11 /* DDR */
12 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
13 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
14 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
15 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
16 #define CONFIG_CMD_MEMINFO
17 #define CONFIG_SYS_MEMTEST_START	0x80000000
18 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
19 
20 #ifndef CONFIG_SPL_BUILD
21 #undef BOOT_TARGET_DEVICES
22 #define BOOT_TARGET_DEVICES(func) \
23 	func(USB, usb, 0)
24 #endif
25 
26 #undef CONFIG_EXTRA_ENV_SETTINGS
27 #define CONFIG_EXTRA_ENV_SETTINGS		\
28 	"verify=no\0"				\
29 	"fdt_high=0xffffffffffffffff\0"		\
30 	"initrd_high=0xffffffffffffffff\0"	\
31 	"fdt_addr=0x00f00000\0"			\
32 	"kernel_addr=0x01000000\0"		\
33 	"scriptaddr=0x80000000\0"		\
34 	"fdtheader_addr_r=0x80100000\0"		\
35 	"kernelheader_addr_r=0x80200000\0"	\
36 	"kernel_addr_r=0x96000000\0"		\
37 	"fdt_addr_r=0x90000000\0"		\
38 	"load_addr=0x96000000\0"		\
39 	"kernel_size=0x2800000\0"		\
40 	"console=ttyS0,115200\0"		\
41 	BOOTENV					\
42 	"boot_scripts=ls1012afrdm_boot.scr\0"	\
43 	"scan_dev_for_boot_part="		\
44 	     "part list ${devtype} ${devnum} devplist; "	\
45 	     "env exists devplist || setenv devplist 1; "	\
46 	     "for distro_bootpart in ${devplist}; do "		\
47 		  "if fstype ${devtype} "			\
48 		      "${devnum}:${distro_bootpart} "		\
49 		      "bootfstype; then "			\
50 		      "run scan_dev_for_boot; "	\
51 		  "fi; "			\
52 	      "done\0"				\
53 	"scan_dev_for_boot="				  \
54 		"echo Scanning ${devtype} "		  \
55 				"${devnum}:${distro_bootpart}...; "  \
56 		"for prefix in ${boot_prefixes}; do "	  \
57 			"run scan_dev_for_scripts; "	  \
58 		"done;"					  \
59 		"\0"					  \
60 	"installer=load usb 0:2 $load_addr "	\
61 		   "/flex_installer_arm64.itb; "	\
62 		   "bootm $load_addr#$board\0"	\
63 	"qspi_bootcmd=echo Trying load from qspi..;"	\
64 		"sf probe && sf read $load_addr "	\
65 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
66 
67 #undef CONFIG_BOOTCOMMAND
68 #ifdef CONFIG_TFABOOT
69 #undef QSPI_NOR_BOOTCOMMAND
70 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
71 #else
72 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
73 #endif
74 
75 #define CONFIG_CMD_MEMINFO
76 #define CONFIG_SYS_MEMTEST_START	0x80000000
77 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
78 
79 #endif /* __LS1012ARDB_H__ */
80