1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2016 Freescale Semiconductor 4 */ 5 6 #ifndef __LS1012A_COMMON_H 7 #define __LS1012A_COMMON_H 8 9 #define CONFIG_GICV2 10 11 #include <asm/arch/config.h> 12 #include <asm/arch/stream_id_lsch2.h> 13 14 #define CONFIG_SYS_CLK_FREQ 125000000 15 16 #define CONFIG_SKIP_LOWLEVEL_INIT 17 18 #ifdef CONFIG_TFABOOT 19 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE 20 #else 21 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) 22 #endif 23 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) 24 25 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 27 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 28 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL 29 30 /* Generic Timer Definitions */ 31 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 32 33 /* CSU */ 34 #define CONFIG_LAYERSCAPE_NS_ACCESS 35 36 /* Size of malloc() pool */ 37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) 38 39 /*SPI device */ 40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT) 41 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 42 #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 43 #define CONFIG_SPI_FLASH_SPANSION 44 #define CONFIG_FSL_SPI_INTERFACE 45 #define CONFIG_SF_DATAFLASH 46 47 #define CONFIG_FSL_QSPI 48 #define QSPI0_AMBA_BASE 0x40000000 49 #define CONFIG_SPI_FLASH_SPANSION 50 51 #define FSL_QSPI_FLASH_SIZE SZ_64M 52 #define FSL_QSPI_FLASH_NUM 2 53 54 /* 55 * Environment 56 */ 57 #define CONFIG_ENV_OVERWRITE 58 59 #define CONFIG_ENV_SIZE 0x40000 /* 256KB */ 60 #ifdef CONFIG_TFABOOT 61 #define CONFIG_ENV_OFFSET 0x500000 /* 5MB */ 62 #else 63 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ 64 #endif 65 #define CONFIG_ENV_SECT_SIZE 0x40000 66 #endif 67 68 /* SATA */ 69 #define CONFIG_SCSI_AHCI_PLAT 70 71 #define CONFIG_SYS_SATA AHCI_BASE_ADDR 72 73 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 74 #define CONFIG_SYS_SCSI_MAX_LUN 1 75 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 76 CONFIG_SYS_SCSI_MAX_LUN) 77 78 /* I2C */ 79 #define CONFIG_SYS_I2C 80 81 #define CONFIG_SYS_NS16550_SERIAL 82 #define CONFIG_SYS_NS16550_REG_SIZE 1 83 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) 84 85 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 86 87 #define CONFIG_SYS_HZ 1000 88 89 #define CONFIG_HWCONFIG 90 #define HWCONFIG_BUFFER_SIZE 128 91 92 #ifndef CONFIG_SPL_BUILD 93 #define BOOT_TARGET_DEVICES(func) \ 94 func(MMC, mmc, 0) \ 95 func(USB, usb, 0) \ 96 func(SCSI, scsi, 0) \ 97 func(DHCP, dhcp, na) 98 #include <config_distro_bootcmd.h> 99 #endif 100 101 /* Initial environment variables */ 102 #define CONFIG_EXTRA_ENV_SETTINGS \ 103 "verify=no\0" \ 104 "loadaddr=0x80100000\0" \ 105 "kernel_addr=0x100000\0" \ 106 "fdt_high=0xffffffffffffffff\0" \ 107 "initrd_high=0xffffffffffffffff\0" \ 108 "kernel_start=0x1000000\0" \ 109 "kernel_load=0xa0000000\0" \ 110 "kernel_size=0x2800000\0" \ 111 112 #undef CONFIG_BOOTCOMMAND 113 #ifdef CONFIG_TFABOOT 114 #define QSPI_NOR_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ 115 "$kernel_start $kernel_size && "\ 116 "bootm $kernel_load" 117 #else 118 #define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\ 119 "$kernel_start $kernel_size && "\ 120 "bootm $kernel_load" 121 #endif 122 123 /* Monitor Command Prompt */ 124 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 125 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 126 127 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 128 129 #include <asm/arch/soc.h> 130 131 #endif /* __LS1012A_COMMON_H */ 132