1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2017 NXP
4  */
5 
6 #ifndef __LS1012A2G5RDB_H__
7 #define __LS1012A2G5RDB_H__
8 
9 #include "ls1012a_common.h"
10 
11 /* DDR */
12 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
13 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
14 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
15 #define CONFIG_CMD_MEMINFO
16 #define CONFIG_SYS_MEMTEST_START	0x80000000
17 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
18 
19 /*  MMC  */
20 #ifdef CONFIG_MMC
21 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
22 #endif
23 
24 /* SATA */
25 #define CONFIG_LIBATA
26 #define CONFIG_SCSI_AHCI
27 #define CONFIG_SCSI_AHCI_PLAT
28 
29 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
30 
31 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
32 #define CONFIG_SYS_SCSI_MAX_LUN			1
33 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
34 						CONFIG_SYS_SCSI_MAX_LUN)
35 #define CONFIG_CMD_MEMINFO
36 #define CONFIG_SYS_MEMTEST_START	0x80000000
37 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
38 
39 #undef CONFIG_EXTRA_ENV_SETTINGS
40 #define CONFIG_EXTRA_ENV_SETTINGS		\
41 	"verify=no\0"				\
42 	"fdt_high=0xffffffffffffffff\0"		\
43 	"initrd_high=0xffffffffffffffff\0"	\
44 	"fdt_addr=0x00f00000\0"			\
45 	"kernel_addr=0x01000000\0"		\
46 	"kernelheader_addr=0x800000\0"		\
47 	"scriptaddr=0x80000000\0"		\
48 	"scripthdraddr=0x80080000\0"		\
49 	"fdtheader_addr_r=0x80100000\0"		\
50 	"kernelheader_addr_r=0x80200000\0"	\
51 	"kernel_addr_r=0x81000000\0"		\
52 	"fdt_addr_r=0x90000000\0"		\
53 	"load_addr=0xa0000000\0"		\
54 	"kernel_size=0x2800000\0"		\
55 	"kernelheader_size=0x40000\0"		\
56 	"console=ttyS0,115200\0"		\
57 	BOOTENV					\
58 	"boot_scripts=ls1012ardb_boot.scr\0"	\
59 	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
60 	"scan_dev_for_boot_part="		\
61 	     "part list ${devtype} ${devnum} devplist; "	\
62 	     "env exists devplist || setenv devplist 1; "	\
63 	     "for distro_bootpart in ${devplist}; do "		\
64 		  "if fstype ${devtype} "			\
65 		      "${devnum}:${distro_bootpart} "		\
66 		      "bootfstype; then "			\
67 		      "run scan_dev_for_boot; "	\
68 		  "fi; "			\
69 	      "done\0"				\
70 	"scan_dev_for_boot="				  \
71 		"echo Scanning ${devtype} "		  \
72 				"${devnum}:${distro_bootpart}...; "  \
73 		"for prefix in ${boot_prefixes}; do "	  \
74 			"run scan_dev_for_scripts; "	  \
75 		"done;"					  \
76 		"\0"					  \
77 	"boot_a_script="				  \
78 		"load ${devtype} ${devnum}:${distro_bootpart} "  \
79 			"${scriptaddr} ${prefix}${script}; "    \
80 		"env exists secureboot && load ${devtype} "     \
81 			"${devnum}:${distro_bootpart} "		\
82 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
83 			"&& esbc_validate ${scripthdraddr};"    \
84 		"source ${scriptaddr}\0"	  \
85 	"installer=load mmc 0:2 $load_addr "	\
86 		   "/flex_installer_arm64.itb; "	\
87 		   "bootm $load_addr#$board\0"	\
88 	"qspi_bootcmd=echo Trying load from qspi..;"	\
89 		"sf probe && sf read $load_addr "	\
90 		"$kernel_addr $kernel_size; env exists secureboot "	\
91 		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
92 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
93 		"bootm $load_addr#$board\0"
94 
95 #undef CONFIG_BOOTCOMMAND
96 #ifdef CONFIG_TFABOOT
97 #undef QSPI_NOR_BOOTCOMMAND
98 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
99 			     "env exists secureboot && esbc_halt;"
100 #else
101 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
102 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
103 			   "env exists secureboot && esbc_halt;"
104 #endif
105 #endif
106 
107 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
108 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
109 
110 #include <asm/fsl_secure_boot.h>
111 
112 #endif /* __LS1012A2G5RDB_H__ */
113