1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2016 David Lechner <david@lechnology.com> 4 * 5 * Based on da850evm.h 6 * 7 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 8 * 9 * Based on davinci_dvevm.h. Original Copyrights follow: 10 * 11 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 /* 18 * SoC Configuration 19 */ 20 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH 21 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) 22 #define CONFIG_SYS_OSCIN_FREQ 24000000 23 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE 24 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) 25 26 /* 27 * Memory Info 28 */ 29 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ 30 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ 31 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ 32 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ 33 34 /* memtest start addr */ 35 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) 36 37 /* memtest will be run on 16MB */ 38 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) 39 40 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 41 42 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ 43 DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ 44 DAVINCI_SYSCFG_SUSPSRC_SPI0 | \ 45 DAVINCI_SYSCFG_SUSPSRC_UART1 | \ 46 DAVINCI_SYSCFG_SUSPSRC_EMAC | \ 47 DAVINCI_SYSCFG_SUSPSRC_I2C) 48 49 /* 50 * PLL configuration 51 */ 52 53 #define CONFIG_SYS_DA850_PLL0_PLLM 24 54 #define CONFIG_SYS_DA850_PLL1_PLLM 21 55 56 /* 57 * DDR2 memory configuration 58 */ 59 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ 60 DV_DDR_PHY_EXT_STRBEN | \ 61 (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) 62 63 #define CONFIG_SYS_DA850_DDR2_SDBCR ( \ 64 (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ 65 (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ 66 (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ 67 (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ 68 (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ 69 (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ 70 (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) 71 72 /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */ 73 #define CONFIG_SYS_DA850_DDR2_SDBCR2 0 74 75 #define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ 76 (14 << DV_DDR_SDTMR1_RFC_SHIFT) | \ 77 (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ 78 (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ 79 (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ 80 (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ 81 (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ 82 (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ 83 (0 << DV_DDR_SDTMR1_WTR_SHIFT)) 84 85 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ 86 (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ 87 (0 << DV_DDR_SDTMR2_XP_SHIFT) | \ 88 (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ 89 (17 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ 90 (199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ 91 (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ 92 (0 << DV_DDR_SDTMR2_CKE_SHIFT)) 93 94 #define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000494 95 #define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 96 97 /* 98 * Serial Driver info 99 */ 100 #define CONFIG_SYS_NS16550_SERIAL 101 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ 102 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART1_BASE /* Base address of UART1 */ 103 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) 104 105 #define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE 106 #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) 107 #define CONFIG_SF_DEFAULT_SPEED 50000000 108 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 109 110 /* 111 * I2C Configuration 112 */ 113 #define CONFIG_SYS_I2C 114 #define CONFIG_SYS_I2C_DAVINCI 115 #define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 116 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ 117 118 /* 119 * U-Boot general configuration 120 */ 121 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ 122 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 123 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ 124 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) 125 #define CONFIG_MX_CYCLIC 126 127 /* 128 * Linux Information 129 */ 130 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 131 #define CONFIG_HWCONFIG /* enable hwconfig */ 132 #define CONFIG_CMDLINE_TAG 133 #define CONFIG_REVISION_TAG 134 #define CONFIG_SERIAL_TAG 135 #define CONFIG_SETUP_MEMORY_TAGS 136 #define CONFIG_SETUP_INITRD_TAG 137 #define CONFIG_BOOTCOMMAND \ 138 "if mmc rescan; then " \ 139 "if run loadbootscr; then " \ 140 "run bootscript; " \ 141 "else " \ 142 "if run loadimage; then " \ 143 "run mmcargs; " \ 144 "run mmcboot; " \ 145 "else " \ 146 "run flashargs; " \ 147 "run flashboot; " \ 148 "fi; " \ 149 "fi; " \ 150 "else " \ 151 "run flashargs; " \ 152 "run flashboot; " \ 153 "fi" 154 #define CONFIG_EXTRA_ENV_SETTINGS \ 155 "hostname=EV3\0" \ 156 "memsize=64M\0" \ 157 "filesyssize=10M\0" \ 158 "verify=n\0" \ 159 "console=ttyS1,115200n8\0" \ 160 "bootscraddr=0xC0600000\0" \ 161 "loadaddr=0xC0007FC0\0" \ 162 "filesysaddr=0xC1180000\0" \ 163 "fwupdateboot=mw 0xFFFF1FFC 0x5555AAAA; reset\0" \ 164 "mmcargs=setenv bootargs mem=${memsize} console=${console} root=/dev/mmcblk0p2 rw rootwait lpj=747520\0" \ 165 "mmcboot=bootm ${loadaddr}\0" \ 166 "flashargs=setenv bootargs mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=squashfs console=${console} lpj=747520\0" \ 167 "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x300000; sf read ${filesysaddr} 0x350000 0x960000; bootm ${loadaddr}\0" \ 168 "loadimage=fatload mmc 0 ${loadaddr} uImage\0" \ 169 "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \ 170 "bootscript=source ${bootscraddr}\0" \ 171 172 #ifdef CONFIG_CMD_BDI 173 #define CONFIG_CLOCKS 174 #endif 175 176 #define CONFIG_ENV_SIZE (16 << 10) 177 178 /* additions for new relocation code, must added to all boards */ 179 #define CONFIG_SYS_SDRAM_BASE 0xc0000000 180 181 #define CONFIG_SYS_INIT_SP_ADDR 0x80010000 182 183 #include <asm/arch/hardware.h> 184 185 #endif /* __CONFIG_H */ 186