1 /* 2 * Copyright (C) 2016 David Lechner <david@lechnology.com> 3 * 4 * Based on da850evm.h 5 * 6 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 7 * 8 * Based on davinci_dvevm.h. Original Copyrights follow: 9 * 10 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 /* 19 * SoC Configuration 20 */ 21 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH 22 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) 23 #define CONFIG_SYS_OSCIN_FREQ 24000000 24 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE 25 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) 26 27 /* 28 * Memory Info 29 */ 30 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ 31 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ 32 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ 33 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ 34 35 /* memtest start addr */ 36 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) 37 38 /* memtest will be run on 16MB */ 39 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) 40 41 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 42 43 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ 44 DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ 45 DAVINCI_SYSCFG_SUSPSRC_SPI0 | \ 46 DAVINCI_SYSCFG_SUSPSRC_UART1 | \ 47 DAVINCI_SYSCFG_SUSPSRC_EMAC | \ 48 DAVINCI_SYSCFG_SUSPSRC_I2C) 49 50 /* 51 * PLL configuration 52 */ 53 54 #define CONFIG_SYS_DA850_PLL0_PLLM 24 55 #define CONFIG_SYS_DA850_PLL1_PLLM 21 56 57 /* 58 * DDR2 memory configuration 59 */ 60 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ 61 DV_DDR_PHY_EXT_STRBEN | \ 62 (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) 63 64 #define CONFIG_SYS_DA850_DDR2_SDBCR ( \ 65 (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ 66 (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ 67 (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ 68 (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ 69 (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ 70 (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ 71 (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) 72 73 /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */ 74 #define CONFIG_SYS_DA850_DDR2_SDBCR2 0 75 76 #define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ 77 (14 << DV_DDR_SDTMR1_RFC_SHIFT) | \ 78 (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ 79 (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ 80 (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ 81 (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ 82 (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ 83 (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ 84 (0 << DV_DDR_SDTMR1_WTR_SHIFT)) 85 86 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ 87 (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ 88 (0 << DV_DDR_SDTMR2_XP_SHIFT) | \ 89 (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ 90 (17 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ 91 (199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ 92 (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ 93 (0 << DV_DDR_SDTMR2_CKE_SHIFT)) 94 95 #define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000494 96 #define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 97 98 /* 99 * Serial Driver info 100 */ 101 #define CONFIG_SYS_NS16550_SERIAL 102 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ 103 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART1_BASE /* Base address of UART1 */ 104 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) 105 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ 106 107 #define CONFIG_SPI 108 #define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE 109 #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) 110 #define CONFIG_SF_DEFAULT_SPEED 50000000 111 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 112 113 /* 114 * I2C Configuration 115 */ 116 #define CONFIG_SYS_I2C 117 #define CONFIG_SYS_I2C_DAVINCI 118 #define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 119 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ 120 121 /* 122 * U-Boot general configuration 123 */ 124 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ 125 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 126 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ 127 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) 128 #define CONFIG_AUTO_COMPLETE 129 #define CONFIG_CMDLINE_EDITING 130 #define CONFIG_SYS_LONGHELP 131 #define CONFIG_MX_CYCLIC 132 133 /* 134 * Linux Information 135 */ 136 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 137 #define CONFIG_HWCONFIG /* enable hwconfig */ 138 #define CONFIG_CMDLINE_TAG 139 #define CONFIG_REVISION_TAG 140 #define CONFIG_SERIAL_TAG 141 #define CONFIG_SETUP_MEMORY_TAGS 142 #define CONFIG_SETUP_INITRD_TAG 143 #define CONFIG_BOOTCOMMAND \ 144 "if mmc rescan; then " \ 145 "if run loadbootscr; then " \ 146 "run bootscript; " \ 147 "else " \ 148 "if run loadimage; then " \ 149 "run mmcargs; " \ 150 "run mmcboot; " \ 151 "else " \ 152 "run flashargs; " \ 153 "run flashboot; " \ 154 "fi; " \ 155 "fi; " \ 156 "else " \ 157 "run flashargs; " \ 158 "run flashboot; " \ 159 "fi" 160 #define CONFIG_EXTRA_ENV_SETTINGS \ 161 "hostname=EV3\0" \ 162 "memsize=64M\0" \ 163 "filesyssize=10M\0" \ 164 "verify=n\0" \ 165 "console=ttyS1,115200n8\0" \ 166 "bootscraddr=0xC0600000\0" \ 167 "loadaddr=0xC0007FC0\0" \ 168 "filesysaddr=0xC1180000\0" \ 169 "fwupdateboot=mw 0xFFFF1FFC 0x5555AAAA; reset\0" \ 170 "mmcargs=setenv bootargs mem=${memsize} console=${console} root=/dev/mmcblk0p2 rw rootwait lpj=747520\0" \ 171 "mmcboot=bootm ${loadaddr}\0" \ 172 "flashargs=setenv bootargs mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=squashfs console=${console} lpj=747520\0" \ 173 "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x300000; sf read ${filesysaddr} 0x350000 0x960000; bootm ${loadaddr}\0" \ 174 "loadimage=fatload mmc 0 ${loadaddr} uImage\0" \ 175 "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \ 176 "bootscript=source ${bootscraddr}\0" \ 177 178 #ifdef CONFIG_CMD_BDI 179 #define CONFIG_CLOCKS 180 #endif 181 182 #define CONFIG_ENV_SIZE (16 << 10) 183 184 /* additions for new relocation code, must added to all boards */ 185 #define CONFIG_SYS_SDRAM_BASE 0xc0000000 186 187 #define CONFIG_SYS_INIT_SP_ADDR 0x80010000 188 189 #include <asm/arch/hardware.h> 190 191 #endif /* __CONFIG_H */ 192