xref: /openbmc/u-boot/include/configs/koelsch.h (revision 8379c799)
1 /*
2  * include/configs/koelsch.h
3  *
4  * Copyright (C) 2013 Renesas Electronics Corporation
5  *
6  * SPDX-License-Identifier: GPL-2.0
7  */
8 
9 #ifndef __KOELSCH_H
10 #define __KOELSCH_H
11 
12 #undef DEBUG
13 #define CONFIG_R8A7791
14 #define CONFIG_RMOBILE_BOARD_STRING "Koelsch"
15 
16 #include "rcar-gen2-common.h"
17 
18 #if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
19 #define CONFIG_SYS_TEXT_BASE	0x70000000
20 #else
21 #define CONFIG_SYS_TEXT_BASE	0xE6304000
22 #endif
23 
24 /* STACK */
25 #if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
26 #define CONFIG_SYS_INIT_SP_ADDR		0x7003FFFC
27 #else
28 #define CONFIG_SYS_INIT_SP_ADDR		0xE633fffC
29 #endif
30 
31 #define STACK_AREA_SIZE			0xC000
32 #define LOW_LEVEL_MERAM_STACK	\
33 		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
34 
35 /* MEMORY */
36 #define RCAR_GEN2_SDRAM_BASE		0x40000000
37 #define RCAR_GEN2_SDRAM_SIZE		(2048u * 1024 * 1024)
38 #define RCAR_GEN2_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
39 
40 /* SCIF */
41 #define CONFIG_SCIF_CONSOLE
42 
43 /* FLASH */
44 #define CONFIG_SYS_NO_FLASH
45 #define CONFIG_SPI
46 #define CONFIG_SH_QSPI
47 #define CONFIG_SPI_FLASH_SPANSION
48 
49 /* SH Ether */
50 #define CONFIG_SH_ETHER
51 #define CONFIG_SH_ETHER_USE_PORT	0
52 #define CONFIG_SH_ETHER_PHY_ADDR	0x1
53 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
54 #define CONFIG_SH_ETHER_CACHE_WRITEBACK
55 #define CONFIG_SH_ETHER_CACHE_INVALIDATE
56 #define CONFIG_PHYLIB
57 #define CONFIG_PHY_MICREL
58 #define CONFIG_BITBANGMII
59 #define CONFIG_BITBANGMII_MULTI
60 #define CONFIG_SH_ETHER_ALIGNE_SIZE 64
61 
62 /* Board Clock */
63 #define RMOBILE_XTAL_CLK	20000000u
64 #define CONFIG_SYS_CLK_FREQ	RMOBILE_XTAL_CLK
65 #define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
66 #define CONFIG_SYS_TMU_CLK_DIV	4
67 
68 /* i2c */
69 #define CONFIG_CMD_I2C
70 #define CONFIG_SYS_I2C
71 #define CONFIG_SYS_I2C_SH
72 #define CONFIG_SYS_I2C_SLAVE	0x7F
73 #define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	3
74 #define CONFIG_SYS_I2C_SH_SPEED0	400000
75 #define CONFIG_SYS_I2C_SH_SPEED1	400000
76 #define CONFIG_SYS_I2C_SH_SPEED2	400000
77 #define CONFIG_SH_I2C_DATA_HIGH	4
78 #define CONFIG_SH_I2C_DATA_LOW	5
79 #define CONFIG_SH_I2C_CLOCK	10000000
80 
81 #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
82 
83 /* USB */
84 #define CONFIG_USB_EHCI
85 #define CONFIG_USB_EHCI_RMOBILE
86 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
87 #define CONFIG_USB_STORAGE
88 
89 /* Module stop status bits */
90 /* INTC-RT */
91 #define CONFIG_SMSTP0_ENA	0x00400000
92 /* MSIF*/
93 #define CONFIG_SMSTP2_ENA	0x00002000
94 /* INTC-SYS, IRQC */
95 #define CONFIG_SMSTP4_ENA	0x00000180
96 /* SCIF0 */
97 #define CONFIG_SMSTP7_ENA	0x00200000
98 
99 /* SD */
100 #define CONFIG_MMC
101 #define CONFIG_CMD_MMC
102 #define CONFIG_GENERIC_MMC
103 #define CONFIG_SH_SDHI_FREQ	97500000
104 
105 #endif	/* __KOELSCH_H */
106