xref: /openbmc/u-boot/include/configs/koelsch.h (revision 23ff8633)
1 /*
2  * include/configs/koelsch.h
3  *
4  * Copyright (C) 2013 Renesas Electronics Corporation
5  *
6  * SPDX-License-Identifier: GPL-2.0
7  */
8 
9 #ifndef __KOELSCH_H
10 #define __KOELSCH_H
11 
12 #undef DEBUG
13 #define CONFIG_R8A7791
14 #define CONFIG_RMOBILE_BOARD_STRING "Koelsch"
15 
16 #include "rcar-gen2-common.h"
17 
18 #if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
19 #define CONFIG_SYS_TEXT_BASE	0x70000000
20 #else
21 #define CONFIG_SYS_TEXT_BASE	0xE6304000
22 #endif
23 
24 /* STACK */
25 #if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
26 #define CONFIG_SYS_INIT_SP_ADDR		0x7003FFFC
27 #else
28 #define CONFIG_SYS_INIT_SP_ADDR		0xE633fffC
29 #endif
30 
31 #define STACK_AREA_SIZE			0xC000
32 #define LOW_LEVEL_MERAM_STACK	\
33 		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
34 
35 /* MEMORY */
36 #define RCAR_GEN2_SDRAM_BASE		0x40000000
37 #define RCAR_GEN2_SDRAM_SIZE		(2048u * 1024 * 1024)
38 #define RCAR_GEN2_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
39 
40 /* SCIF */
41 #define CONFIG_SCIF_CONSOLE
42 
43 /* FLASH */
44 #define CONFIG_SYS_NO_FLASH
45 #define CONFIG_SPI
46 #define CONFIG_SH_QSPI
47 
48 /* SH Ether */
49 #define CONFIG_SH_ETHER
50 #define CONFIG_SH_ETHER_USE_PORT	0
51 #define CONFIG_SH_ETHER_PHY_ADDR	0x1
52 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
53 #define CONFIG_SH_ETHER_CACHE_WRITEBACK
54 #define CONFIG_SH_ETHER_CACHE_INVALIDATE
55 #define CONFIG_PHYLIB
56 #define CONFIG_PHY_MICREL
57 #define CONFIG_BITBANGMII
58 #define CONFIG_BITBANGMII_MULTI
59 #define CONFIG_SH_ETHER_ALIGNE_SIZE 64
60 
61 /* Board Clock */
62 #define RMOBILE_XTAL_CLK	20000000u
63 #define CONFIG_SYS_CLK_FREQ	RMOBILE_XTAL_CLK
64 #define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
65 #define CONFIG_SYS_TMU_CLK_DIV	4
66 
67 /* i2c */
68 #define CONFIG_CMD_I2C
69 #define CONFIG_SYS_I2C
70 #define CONFIG_SYS_I2C_SH
71 #define CONFIG_SYS_I2C_SLAVE	0x7F
72 #define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	3
73 #define CONFIG_SYS_I2C_SH_SPEED0	400000
74 #define CONFIG_SYS_I2C_SH_SPEED1	400000
75 #define CONFIG_SYS_I2C_SH_SPEED2	400000
76 #define CONFIG_SH_I2C_DATA_HIGH	4
77 #define CONFIG_SH_I2C_DATA_LOW	5
78 #define CONFIG_SH_I2C_CLOCK	10000000
79 
80 #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
81 
82 /* USB */
83 #define CONFIG_USB_EHCI
84 #define CONFIG_USB_EHCI_RMOBILE
85 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
86 #define CONFIG_USB_STORAGE
87 
88 /* Module stop status bits */
89 /* INTC-RT */
90 #define CONFIG_SMSTP0_ENA	0x00400000
91 /* MSIF*/
92 #define CONFIG_SMSTP2_ENA	0x00002000
93 /* INTC-SYS, IRQC */
94 #define CONFIG_SMSTP4_ENA	0x00000180
95 /* SCIF0 */
96 #define CONFIG_SMSTP7_ENA	0x00200000
97 
98 /* SD */
99 #define CONFIG_MMC
100 #define CONFIG_CMD_MMC
101 #define CONFIG_GENERIC_MMC
102 #define CONFIG_SH_SDHI_FREQ	97500000
103 
104 #endif	/* __KOELSCH_H */
105