1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2011-2012 10 * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com 11 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 /* 17 * for linking errors see 18 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html 19 */ 20 21 #ifndef _CONFIG_KM_KIRKWOOD_H 22 #define _CONFIG_KM_KIRKWOOD_H 23 24 /* KM_KIRKWOOD */ 25 #if defined(CONFIG_KM_KIRKWOOD) 26 #define CONFIG_HOSTNAME "km_kirkwood" 27 #define CONFIG_KM_DISABLE_PCIE 28 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 29 30 /* KM_KIRKWOOD_PCI */ 31 #elif defined(CONFIG_KM_KIRKWOOD_PCI) 32 #define CONFIG_HOSTNAME "km_kirkwood_pci" 33 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 34 #define CONFIG_KM_FPGA_CONFIG 35 #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" 36 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE 37 38 /* KM_KIRKWOOD_128M16 */ 39 #elif defined(CONFIG_KM_KIRKWOOD_128M16) 40 #define CONFIG_HOSTNAME "km_kirkwood_128m16" 41 #undef CONFIG_SYS_KWD_CONFIG 42 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 43 #define CONFIG_KM_DISABLE_PCIE 44 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 45 46 /* KM_NUSA / KM_SUGP1 */ 47 #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) 48 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 49 50 # if defined(CONFIG_KM_NUSA) 51 #define CONFIG_HOSTNAME "kmnusa" 52 # elif defined(CONFIG_KM_SUGP1) 53 #define CONFIG_HOSTNAME "kmsugp1" 54 #define KM_PCIE_RESET_MPP7 55 #endif 56 57 #undef CONFIG_SYS_KWD_CONFIG 58 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 59 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 60 #define CONFIG_KM_FPGA_CONFIG 61 #define CONFIG_KM_PIGGY4_88E6352 62 #define CONFIG_MV88E6352_SWITCH 63 #define CONFIG_KM_MVEXTSW_ADDR 0x10 64 65 /* KM_MGCOGE3UN */ 66 #elif defined(CONFIG_KM_MGCOGE3UN) 67 #define CONFIG_HOSTNAME "mgcoge3un" 68 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 69 #undef CONFIG_SYS_KWD_CONFIG 70 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg 71 #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" 72 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 73 #define CONFIG_KM_DISABLE_PCIE 74 #define CONFIG_KM_PIGGY4_88E6061 75 76 /* KMCOGE5UN */ 77 #elif defined(CONFIG_KM_COGE5UN) 78 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 79 #undef CONFIG_SYS_KWD_CONFIG 80 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg 81 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 82 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 83 #define CONFIG_HOSTNAME "kmcoge5un" 84 #define CONFIG_KM_DISABLE_PCIE 85 #define CONFIG_KM_PIGGY4_88E6352 86 87 /* KM_PORTL2 */ 88 #elif defined(CONFIG_KM_PORTL2) 89 #define CONFIG_HOSTNAME "portl2" 90 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 91 #define CONFIG_KM_PIGGY4_88E6061 92 93 /* KM_SUV31 */ 94 #elif defined(CONFIG_KM_SUV31) 95 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 96 #define CONFIG_HOSTNAME "kmsuv31" 97 #undef CONFIG_SYS_KWD_CONFIG 98 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 99 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 100 #define CONFIG_KM_FPGA_CONFIG 101 #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" 102 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE 103 #else 104 #error ("Board unsupported") 105 #endif 106 107 /* include common defines/options for all arm based Keymile boards */ 108 #include "km/km_arm.h" 109 110 #if defined(CONFIG_KM_PIGGY4_88E6352) 111 /* 112 * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via 113 * an Marvell 88E6352 simple switch. 114 * In this case we have to change the default settings for the etherent mac. 115 * There is NO ethernet phy. The ARM and Switch are conencted directly over 116 * RGMII in MAC-MAC mode 117 * In this case 1GBit full duplex and autoneg off 118 */ 119 #define PORT_SERIAL_CONTROL_VALUE ( \ 120 MVGBE_FORCE_LINK_PASS | \ 121 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ 122 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ 123 MVGBE_ADV_NO_FLOW_CTRL | \ 124 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ 125 MVGBE_FORCE_BP_MODE_NO_JAM | \ 126 (1 << 9) /* Reserved bit has to be 1 */ | \ 127 MVGBE_DO_NOT_FORCE_LINK_FAIL | \ 128 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ 129 MVGBE_DTE_ADV_0 | \ 130 MVGBE_MIIPHY_MAC_MODE | \ 131 MVGBE_AUTO_NEG_NO_CHANGE | \ 132 MVGBE_MAX_RX_PACKET_1552BYTE | \ 133 MVGBE_CLR_EXT_LOOPBACK | \ 134 MVGBE_SET_FULL_DUPLEX_MODE | \ 135 MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ 136 MVGBE_SET_GMII_SPEED_TO_1000 |\ 137 MVGBE_SET_MII_SPEED_TO_100) 138 139 #endif 140 141 #ifdef CONFIG_KM_PIGGY4_88E6061 142 /* 143 * Some keymile boards like mgcoge3un have their PIGGY4 connected via 144 * an Marvell 88E6061 simple switch. 145 * In this case we have to change the default settings for the 146 * ethernet phy connected to the kirkwood. 147 * In this case 100MB full duplex and autoneg off 148 */ 149 #define PORT_SERIAL_CONTROL_VALUE ( \ 150 MVGBE_FORCE_LINK_PASS | \ 151 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ 152 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ 153 MVGBE_ADV_NO_FLOW_CTRL | \ 154 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ 155 MVGBE_FORCE_BP_MODE_NO_JAM | \ 156 (1 << 9) /* Reserved bit has to be 1 */ | \ 157 MVGBE_DO_NOT_FORCE_LINK_FAIL | \ 158 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ 159 MVGBE_DTE_ADV_0 | \ 160 MVGBE_MIIPHY_MAC_MODE | \ 161 MVGBE_AUTO_NEG_NO_CHANGE | \ 162 MVGBE_MAX_RX_PACKET_1552BYTE | \ 163 MVGBE_CLR_EXT_LOOPBACK | \ 164 MVGBE_SET_FULL_DUPLEX_MODE | \ 165 MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ 166 MVGBE_SET_GMII_SPEED_TO_10_100 |\ 167 MVGBE_SET_MII_SPEED_TO_100) 168 #endif 169 170 #ifdef CONFIG_KM_DISABLE_PCI 171 #undef CONFIG_KIRKWOOD_PCIE_INIT 172 #endif 173 174 #endif /* _CONFIG_KM_KIRKWOOD */ 175