1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2011-2012 10 * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com 11 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 /* 17 * for linking errors see 18 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html 19 */ 20 21 #ifndef _CONFIG_KM_KIRKWOOD_H 22 #define _CONFIG_KM_KIRKWOOD_H 23 24 /* KM_KIRKWOOD */ 25 #if defined(CONFIG_KM_KIRKWOOD) 26 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood" 27 #define CONFIG_HOSTNAME km_kirkwood 28 #define CONFIG_KM_DISABLE_PCIE 29 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 30 31 /* KM_KIRKWOOD_PCI */ 32 #elif defined(CONFIG_KM_KIRKWOOD_PCI) 33 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI" 34 #define CONFIG_HOSTNAME km_kirkwood_pci 35 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 36 #define CONFIG_KM_FPGA_CONFIG 37 38 /* KM_NUSA */ 39 #elif defined(CONFIG_KM_NUSA) 40 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 41 #define CONFIG_IDENT_STRING "\nKeymile NUSA" 42 #define CONFIG_HOSTNAME kmnusa 43 #undef CONFIG_SYS_KWD_CONFIG 44 #define CONFIG_SYS_KWD_CONFIG \ 45 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 46 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 47 #define CONFIG_KM_FPGA_CONFIG 48 #define CONFIG_KM_PIGGY4_88E6352 49 #define CONFIG_MV88E6352_SWITCH 50 #define CONFIG_KM_MVEXTSW_ADDR 0x10 51 52 /* KM_MGCOGE3UN */ 53 #elif defined(CONFIG_KM_MGCOGE3UN) 54 #define CONFIG_IDENT_STRING "\nKeymile COGE3UN" 55 #define CONFIG_HOSTNAME mgcoge3un 56 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 57 #undef CONFIG_SYS_KWD_CONFIG 58 #define CONFIG_SYS_KWD_CONFIG \ 59 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg 60 #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" 61 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 62 #define CONFIG_KM_DISABLE_PCIE 63 #define CONFIG_KM_PIGGY4_88E6061 64 65 /* KMCOGE5UN */ 66 #elif defined(CONFIG_KM_COGE5UN) 67 #define CONFIG_IDENT_STRING "\nKeymile COGE5UN" 68 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 69 #undef CONFIG_SYS_KWD_CONFIG 70 #define CONFIG_SYS_KWD_CONFIG \ 71 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg 72 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 73 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 74 #define CONFIG_HOSTNAME kmcoge5un 75 #define CONFIG_KM_DISABLE_PCIE 76 #define CONFIG_KM_PIGGY4_88E6352 77 78 /* KM_PORTL2 */ 79 #elif defined(CONFIG_KM_PORTL2) 80 #define CONFIG_IDENT_STRING "\nKeymile Port-L2" 81 #define CONFIG_HOSTNAME portl2 82 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 83 #define CONFIG_KM_PIGGY4_88E6061 84 85 /* KM_SUV31 */ 86 #elif defined(CONFIG_KM_SUV31) 87 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 88 #define CONFIG_IDENT_STRING "\nKeymile SUV31" 89 #define CONFIG_HOSTNAME kmsuv31 90 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 91 #define CONFIG_KM_FPGA_CONFIG 92 93 #else 94 #error ("Board unsupported") 95 #endif 96 97 /* include common defines/options for all arm based Keymile boards */ 98 #include "km/km_arm.h" 99 100 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR 101 #define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/ 102 #endif 103 104 #if defined(CONFIG_KM_PIGGY4_88E6352) 105 /* 106 * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via 107 * an Marvell 88E6352 simple switch. 108 * In this case we have to change the default settings for the etherent mac. 109 * There is NO ethernet phy. The ARM and Switch are conencted directly over 110 * RGMII in MAC-MAC mode 111 * In this case 1GBit full duplex and autoneg off 112 */ 113 #define PORT_SERIAL_CONTROL_VALUE ( \ 114 MVGBE_FORCE_LINK_PASS | \ 115 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ 116 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ 117 MVGBE_ADV_NO_FLOW_CTRL | \ 118 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ 119 MVGBE_FORCE_BP_MODE_NO_JAM | \ 120 (1 << 9) /* Reserved bit has to be 1 */ | \ 121 MVGBE_DO_NOT_FORCE_LINK_FAIL | \ 122 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ 123 MVGBE_DTE_ADV_0 | \ 124 MVGBE_MIIPHY_MAC_MODE | \ 125 MVGBE_AUTO_NEG_NO_CHANGE | \ 126 MVGBE_MAX_RX_PACKET_1552BYTE | \ 127 MVGBE_CLR_EXT_LOOPBACK | \ 128 MVGBE_SET_FULL_DUPLEX_MODE | \ 129 MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ 130 MVGBE_SET_GMII_SPEED_TO_1000 |\ 131 MVGBE_SET_MII_SPEED_TO_100) 132 133 #endif 134 135 #ifdef CONFIG_KM_PIGGY4_88E6061 136 /* 137 * Some keymile boards like mgcoge3un have their PIGGY4 connected via 138 * an Marvell 88E6061 simple switch. 139 * In this case we have to change the default settings for the 140 * ethernet phy connected to the kirkwood. 141 * In this case 100MB full duplex and autoneg off 142 */ 143 #define PORT_SERIAL_CONTROL_VALUE ( \ 144 MVGBE_FORCE_LINK_PASS | \ 145 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ 146 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ 147 MVGBE_ADV_NO_FLOW_CTRL | \ 148 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ 149 MVGBE_FORCE_BP_MODE_NO_JAM | \ 150 (1 << 9) /* Reserved bit has to be 1 */ | \ 151 MVGBE_DO_NOT_FORCE_LINK_FAIL | \ 152 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ 153 MVGBE_DTE_ADV_0 | \ 154 MVGBE_MIIPHY_MAC_MODE | \ 155 MVGBE_AUTO_NEG_NO_CHANGE | \ 156 MVGBE_MAX_RX_PACKET_1552BYTE | \ 157 MVGBE_CLR_EXT_LOOPBACK | \ 158 MVGBE_SET_FULL_DUPLEX_MODE | \ 159 MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ 160 MVGBE_SET_GMII_SPEED_TO_10_100 |\ 161 MVGBE_SET_MII_SPEED_TO_100) 162 #endif 163 164 #ifdef CONFIG_KM_DISABLE_PCI 165 #undef CONFIG_KIRKWOOD_PCIE_INIT 166 #endif 167 168 169 #endif /* _CONFIG_KM_KIRKWOOD */ 170