1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2011-2012 10 * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com 11 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 /* 17 * for linking errors see 18 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html 19 */ 20 21 #ifndef _CONFIG_KM_KIRKWOOD_H 22 #define _CONFIG_KM_KIRKWOOD_H 23 24 /* KM_KIRKWOOD */ 25 #if defined(CONFIG_KM_KIRKWOOD) 26 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood" 27 #define CONFIG_HOSTNAME km_kirkwood 28 #define CONFIG_KM_DISABLE_PCIE 29 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 30 31 /* KM_KIRKWOOD_PCI */ 32 #elif defined(CONFIG_KM_KIRKWOOD_PCI) 33 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI" 34 #define CONFIG_HOSTNAME km_kirkwood_pci 35 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 36 #define CONFIG_KM_FPGA_CONFIG 37 #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" 38 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE 39 40 /* KM_KIRKWOOD_128M16 */ 41 #elif defined(CONFIG_KM_KIRKWOOD_128M16) 42 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16" 43 #define CONFIG_HOSTNAME km_kirkwood_128m16 44 #undef CONFIG_SYS_KWD_CONFIG 45 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 46 #define CONFIG_KM_DISABLE_PCIE 47 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 48 49 /* KM_NUSA / KM_SUGP1 */ 50 #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) 51 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 52 53 # if defined(CONFIG_KM_NUSA) 54 #define CONFIG_IDENT_STRING "\nKeymile NUSA" 55 #define CONFIG_HOSTNAME kmnusa 56 # elif defined(CONFIG_KM_SUGP1) 57 #define CONFIG_IDENT_STRING "\nKeymile SUGP1" 58 #define CONFIG_HOSTNAME kmsugp1 59 #define KM_PCIE_RESET_MPP7 60 #endif 61 62 #undef CONFIG_SYS_KWD_CONFIG 63 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 64 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 65 #define CONFIG_KM_FPGA_CONFIG 66 #define CONFIG_KM_PIGGY4_88E6352 67 #define CONFIG_MV88E6352_SWITCH 68 #define CONFIG_KM_MVEXTSW_ADDR 0x10 69 70 /* KM_MGCOGE3UN */ 71 #elif defined(CONFIG_KM_MGCOGE3UN) 72 #define CONFIG_IDENT_STRING "\nKeymile COGE3UN" 73 #define CONFIG_HOSTNAME mgcoge3un 74 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 75 #undef CONFIG_SYS_KWD_CONFIG 76 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg 77 #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" 78 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 79 #define CONFIG_KM_DISABLE_PCIE 80 #define CONFIG_KM_PIGGY4_88E6061 81 82 /* KMCOGE5UN */ 83 #elif defined(CONFIG_KM_COGE5UN) 84 #define CONFIG_IDENT_STRING "\nKeymile COGE5UN" 85 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 86 #undef CONFIG_SYS_KWD_CONFIG 87 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg 88 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 89 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 90 #define CONFIG_HOSTNAME kmcoge5un 91 #define CONFIG_KM_DISABLE_PCIE 92 #define CONFIG_KM_PIGGY4_88E6352 93 94 /* KM_PORTL2 */ 95 #elif defined(CONFIG_KM_PORTL2) 96 #define CONFIG_IDENT_STRING "\nKeymile Port-L2" 97 #define CONFIG_HOSTNAME portl2 98 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 99 #define CONFIG_KM_PIGGY4_88E6061 100 101 /* KM_SUV31 */ 102 #elif defined(CONFIG_KM_SUV31) 103 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ 104 #define CONFIG_IDENT_STRING "\nKeymile SUV31" 105 #define CONFIG_HOSTNAME kmsuv31 106 #undef CONFIG_SYS_KWD_CONFIG 107 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg 108 #define CONFIG_KM_ENV_IS_IN_SPI_NOR 109 #define CONFIG_KM_FPGA_CONFIG 110 #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" 111 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE 112 #else 113 #error ("Board unsupported") 114 #endif 115 116 /* include common defines/options for all arm based Keymile boards */ 117 #include "km/km_arm.h" 118 119 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR 120 #define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/ 121 #endif 122 123 #if defined(CONFIG_KM_PIGGY4_88E6352) 124 /* 125 * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via 126 * an Marvell 88E6352 simple switch. 127 * In this case we have to change the default settings for the etherent mac. 128 * There is NO ethernet phy. The ARM and Switch are conencted directly over 129 * RGMII in MAC-MAC mode 130 * In this case 1GBit full duplex and autoneg off 131 */ 132 #define PORT_SERIAL_CONTROL_VALUE ( \ 133 MVGBE_FORCE_LINK_PASS | \ 134 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ 135 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ 136 MVGBE_ADV_NO_FLOW_CTRL | \ 137 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ 138 MVGBE_FORCE_BP_MODE_NO_JAM | \ 139 (1 << 9) /* Reserved bit has to be 1 */ | \ 140 MVGBE_DO_NOT_FORCE_LINK_FAIL | \ 141 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ 142 MVGBE_DTE_ADV_0 | \ 143 MVGBE_MIIPHY_MAC_MODE | \ 144 MVGBE_AUTO_NEG_NO_CHANGE | \ 145 MVGBE_MAX_RX_PACKET_1552BYTE | \ 146 MVGBE_CLR_EXT_LOOPBACK | \ 147 MVGBE_SET_FULL_DUPLEX_MODE | \ 148 MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ 149 MVGBE_SET_GMII_SPEED_TO_1000 |\ 150 MVGBE_SET_MII_SPEED_TO_100) 151 152 #endif 153 154 #ifdef CONFIG_KM_PIGGY4_88E6061 155 /* 156 * Some keymile boards like mgcoge3un have their PIGGY4 connected via 157 * an Marvell 88E6061 simple switch. 158 * In this case we have to change the default settings for the 159 * ethernet phy connected to the kirkwood. 160 * In this case 100MB full duplex and autoneg off 161 */ 162 #define PORT_SERIAL_CONTROL_VALUE ( \ 163 MVGBE_FORCE_LINK_PASS | \ 164 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ 165 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ 166 MVGBE_ADV_NO_FLOW_CTRL | \ 167 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ 168 MVGBE_FORCE_BP_MODE_NO_JAM | \ 169 (1 << 9) /* Reserved bit has to be 1 */ | \ 170 MVGBE_DO_NOT_FORCE_LINK_FAIL | \ 171 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ 172 MVGBE_DTE_ADV_0 | \ 173 MVGBE_MIIPHY_MAC_MODE | \ 174 MVGBE_AUTO_NEG_NO_CHANGE | \ 175 MVGBE_MAX_RX_PACKET_1552BYTE | \ 176 MVGBE_CLR_EXT_LOOPBACK | \ 177 MVGBE_SET_FULL_DUPLEX_MODE | \ 178 MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ 179 MVGBE_SET_GMII_SPEED_TO_10_100 |\ 180 MVGBE_SET_MII_SPEED_TO_100) 181 #endif 182 183 #ifdef CONFIG_KM_DISABLE_PCI 184 #undef CONFIG_KIRKWOOD_PCIE_INIT 185 #endif 186 187 188 #endif /* _CONFIG_KM_KIRKWOOD */ 189