1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2010-2011 10 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 /* 16 * for linking errors see 17 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html 18 */ 19 20 #ifndef _CONFIG_KM_ARM_H 21 #define _CONFIG_KM_ARM_H 22 23 24 /* We got removed from Linux mach-types.h */ 25 #define MACH_TYPE_KM_KIRKWOOD 2255 26 27 /* 28 * High Level Configuration Options (easy to change) 29 */ 30 #define CONFIG_MARVELL 31 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 32 #define CONFIG_KW88F6281 /* SOC Name */ 33 #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ 34 35 #define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD 36 37 #define CONFIG_NAND_ECC_BCH 38 #define CONFIG_BCH 39 40 /* include common defines/options for all Keymile boards */ 41 #include "keymile-common.h" 42 43 #define CONFIG_CMD_NAND 44 45 /* SPI NOR Flash default params, used by sf commands */ 46 #define CONFIG_SF_DEFAULT_SPEED 8100000 47 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 48 49 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 50 #define CONFIG_ENV_SPI_BUS 0 51 #define CONFIG_ENV_SPI_CS 0 52 #define CONFIG_ENV_SPI_MAX_HZ 8100000 53 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 54 #endif 55 56 /* Reserve 4 MB for malloc */ 57 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 58 59 #include "asm/arch/config.h" 60 61 #define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */ 62 #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ 63 #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ 64 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 65 66 /* pseudo-non volatile RAM [hex] */ 67 #define CONFIG_KM_PNVRAM 0x80000 68 /* physical RAM MTD size [hex] */ 69 #define CONFIG_KM_PHRAM 0x17F000 70 71 #define CONFIG_KM_CRAMFS_ADDR 0x2400000 72 #define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */ 73 #define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */ 74 75 /* architecture specific default bootargs */ 76 #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ 77 "bootcountaddr=${bootcountaddr} ${mtdparts}" \ 78 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" 79 80 #define CONFIG_KM_DEF_ENV_CPU \ 81 "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \ 82 CONFIG_KM_UPDATE_UBOOT \ 83 "set_fdthigh=setenv fdt_high ${kernelmem}\0" \ 84 "checkfdt=" \ 85 "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \ 86 "then true; else setenv cramfsloadfdt true; " \ 87 "setenv boot bootm ${load_addr_r}; " \ 88 "echo No FDT found, booting with the kernel " \ 89 "appended one; fi\0" \ 90 "" 91 92 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 93 #define CONFIG_MISC_INIT_R 94 95 /* 96 * NS16550 Configuration 97 */ 98 #define CONFIG_SYS_NS16550_SERIAL 99 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 100 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK 101 #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE 102 #define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE 103 104 /* 105 * Serial Port configuration 106 * The following definitions let you select what serial you want to use 107 * for your console driver. 108 */ 109 110 #define CONFIG_CONS_INDEX 1 /* Console on UART0 */ 111 112 /* 113 * For booting Linux, the board info and command line data 114 * have to be in the first 8 MB of memory, since this is 115 * the maximum mapped by the Linux kernel during initialization. 116 */ 117 #define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ 118 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 119 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 120 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 121 122 /* 123 * Commands configuration 124 */ 125 #define CONFIG_CMD_MTDPARTS 126 127 /* 128 * Without NOR FLASH we need this 129 */ 130 #define CONFIG_SYS_NO_FLASH 131 132 /* 133 * NAND Flash configuration 134 */ 135 #define CONFIG_SYS_MAX_NAND_DEVICE 1 136 137 #define BOOTFLASH_START 0x0 138 139 /* Kirkwood has two serial IF */ 140 #if (CONFIG_CONS_INDEX == 2) 141 #define CONFIG_KM_CONSOLE_TTY "ttyS1" 142 #else 143 #define CONFIG_KM_CONSOLE_TTY "ttyS0" 144 #endif 145 146 /* 147 * Other required minimal configurations 148 */ 149 #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ 150 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 151 #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ 152 #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ 153 #define CONFIG_NR_DRAM_BANKS 4 154 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 155 156 /* 157 * Ethernet Driver configuration 158 */ 159 #define CONFIG_NETCONSOLE /* include NetConsole support */ 160 #define CONFIG_MII /* expose smi ove miiphy interface */ 161 #define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ 162 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ 163 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 164 #define CONFIG_PHY_BASE_ADR 0 165 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 166 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */ 167 168 /* 169 * UBI related stuff 170 */ 171 #define CONFIG_SYS_USE_UBI 172 173 /* 174 * I2C related stuff 175 */ 176 #undef CONFIG_I2C_MVTWSI 177 #define CONFIG_SYS_I2C 178 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 179 #define CONFIG_SYS_I2C_INIT_BOARD 180 181 #define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ 182 #define CONFIG_SYS_NUM_I2C_BUSES 6 183 #define CONFIG_SYS_I2C_MAX_HOPS 1 184 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ 185 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ 186 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ 187 {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ 188 {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ 189 {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ 190 } 191 192 #ifndef __ASSEMBLY__ 193 #include <asm/arch/gpio.h> 194 extern void __set_direction(unsigned pin, int high); 195 void set_sda(int state); 196 void set_scl(int state); 197 int get_sda(void); 198 int get_scl(void); 199 #define KM_KIRKWOOD_SDA_PIN 8 200 #define KM_KIRKWOOD_SCL_PIN 9 201 #define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300 202 #define KM_KIRKWOOD_ENV_WP 38 203 204 #define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) 205 #define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) 206 #define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) 207 #define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) 208 #define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) 209 #endif 210 211 #define I2C_DELAY udelay(1) 212 #define I2C_SOFT_DECLARATIONS 213 214 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x0 215 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 216 217 /* EEprom support 24C128, 24C256 valid for environment eeprom */ 218 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE 219 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */ 220 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 221 222 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 223 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 224 225 /* 226 * Environment variables configurations 227 */ 228 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 229 #define CONFIG_ENV_IS_IN_SPI_FLASH /* use SPI-Flash for environment vars */ 230 #define CONFIG_ENV_OFFSET 0xc0000 /* no bracets! */ 231 #define CONFIG_ENV_SIZE 0x02000 /* Size of Environment */ 232 #define CONFIG_ENV_SECT_SIZE 0x10000 233 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 234 CONFIG_ENV_SECT_SIZE) 235 #define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ 236 #else 237 #define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ 238 #define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 239 #define CONFIG_ENV_EEPROM_IS_ON_I2C 240 #define CONFIG_SYS_EEPROM_WREN 241 #define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ 242 #define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) 243 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */ 244 #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ 245 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 246 #endif 247 248 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 249 250 251 /* SPI bus claim MPP configuration */ 252 #define CONFIG_SYS_KW_SPI_MPP 0x0 253 254 #define FLASH_GPIO_PIN 0x00010000 255 #define KM_FLASH_GPIO_PIN 16 256 257 #ifndef MTDIDS_DEFAULT 258 # define MTDIDS_DEFAULT "nand0=orion_nand" 259 #endif /* MTDIDS_DEFAULT */ 260 261 #ifndef MTDPARTS_DEFAULT 262 # define MTDPARTS_DEFAULT "mtdparts=" \ 263 "orion_nand:" \ 264 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" 265 #endif /* MTDPARTS_DEFAULT */ 266 267 #define CONFIG_KM_UPDATE_UBOOT \ 268 "update=" \ 269 "sf probe 0;sf erase 0 +${filesize};" \ 270 "sf write ${load_addr_r} 0 ${filesize};\0" 271 272 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 273 #define CONFIG_KM_NEW_ENV \ 274 "newenv=sf probe 0;" \ 275 "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ 276 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" 277 #else 278 #define CONFIG_KM_NEW_ENV \ 279 "newenv=setenv addr 0x100000 && " \ 280 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \ 281 "mw.b ${addr} 0 4 && " \ 282 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ 283 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ 284 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ 285 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" 286 #endif 287 288 #ifndef CONFIG_KM_BOARD_EXTRA_ENV 289 #define CONFIG_KM_BOARD_EXTRA_ENV "" 290 #endif 291 292 /* 293 * Default environment variables 294 */ 295 #define CONFIG_EXTRA_ENV_SETTINGS \ 296 CONFIG_KM_BOARD_EXTRA_ENV \ 297 CONFIG_KM_DEF_ENV \ 298 CONFIG_KM_NEW_ENV \ 299 "arch=arm\0" \ 300 "" 301 302 #if defined(CONFIG_SYS_NO_FLASH) 303 #undef CONFIG_FLASH_CFI_MTD 304 #undef CONFIG_JFFS2_CMDLINE 305 #endif 306 307 /* additions for new relocation code, must be added to all boards */ 308 #define CONFIG_SYS_SDRAM_BASE 0x00000000 309 /* Do early setups now in board_init_f() */ 310 #define CONFIG_BOARD_EARLY_INIT_F 311 312 /* 313 * resereved pram area at the end of memroy [hex] 314 * 8Mbytes for switch + 4Kbytes for bootcount 315 */ 316 #define CONFIG_KM_RESERVED_PRAM 0x801000 317 /* address for the bootcount (taken from end of RAM) */ 318 #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) 319 /* Use generic bootcount RAM driver */ 320 #define CONFIG_BOOTCOUNT_RAM 321 322 /* enable POST tests */ 323 #define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) 324 #define CONFIG_POST_SKIP_ENV_FLAGS 325 #define CONFIG_POST_EXTERNAL_WORD_FUNCS 326 #define CONFIG_CMD_DIAG 327 328 /* we do the whole PCIe FPGA config stuff here */ 329 #define CONFIG_BOARD_LATE_INIT 330 331 #endif /* _CONFIG_KM_ARM_H */ 332