1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2010-2011 10 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 /* 16 * for linking errors see 17 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html 18 */ 19 20 #ifndef _CONFIG_KM_ARM_H 21 #define _CONFIG_KM_ARM_H 22 23 /* We got removed from Linux mach-types.h */ 24 #define MACH_TYPE_KM_KIRKWOOD 2255 25 26 /* 27 * High Level Configuration Options (easy to change) 28 */ 29 #define CONFIG_MARVELL 30 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 31 #define CONFIG_KIRKWOOD /* SOC Family Name */ 32 #define CONFIG_KW88F6281 /* SOC Name */ 33 #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ 34 35 #define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD 36 37 #define CONFIG_NAND_ECC_BCH 38 #define CONFIG_BCH 39 40 /* include common defines/options for all Keymile boards */ 41 #include "keymile-common.h" 42 43 #define CONFIG_CMD_NAND 44 #define CONFIG_CMD_SF 45 46 /* SPI NOR Flash default params, used by sf commands */ 47 #define CONFIG_SF_DEFAULT_SPEED 8100000 48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 49 50 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 51 #define CONFIG_ENV_SPI_BUS 0 52 #define CONFIG_ENV_SPI_CS 0 53 #define CONFIG_ENV_SPI_MAX_HZ 8100000 54 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 55 #endif 56 57 /* Reserve 4 MB for malloc */ 58 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 59 60 #include "asm/arch/config.h" 61 62 #define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */ 63 #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ 64 #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ 65 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 66 67 /* pseudo-non volatile RAM [hex] */ 68 #define CONFIG_KM_PNVRAM 0x80000 69 /* physical RAM MTD size [hex] */ 70 #define CONFIG_KM_PHRAM 0x17F000 71 72 #define CONFIG_KM_CRAMFS_ADDR 0x2400000 73 #define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */ 74 #define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */ 75 76 /* architecture specific default bootargs */ 77 #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ 78 "bootcountaddr=${bootcountaddr} ${mtdparts}" \ 79 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" 80 81 #define CONFIG_KM_DEF_ENV_CPU \ 82 "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \ 83 CONFIG_KM_UPDATE_UBOOT \ 84 "set_fdthigh=setenv fdt_high ${kernelmem}\0" \ 85 "" 86 87 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 88 #define CONFIG_MISC_INIT_R 89 90 /* Pass open firmware flat tree */ 91 #define CONFIG_OF_LIBFDT 92 93 /* 94 * NS16550 Configuration 95 */ 96 #define CONFIG_SYS_NS16550 97 #define CONFIG_SYS_NS16550_SERIAL 98 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 99 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK 100 #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE 101 #define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE 102 103 /* 104 * Serial Port configuration 105 * The following definitions let you select what serial you want to use 106 * for your console driver. 107 */ 108 109 #define CONFIG_CONS_INDEX 1 /* Console on UART0 */ 110 111 /* 112 * For booting Linux, the board info and command line data 113 * have to be in the first 8 MB of memory, since this is 114 * the maximum mapped by the Linux kernel during initialization. 115 */ 116 #define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ 117 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 118 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 119 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 120 121 /* 122 * Commands configuration 123 */ 124 #define CONFIG_CMD_ELF 125 #define CONFIG_CMD_MTDPARTS 126 #define CONFIG_CMD_NFS 127 128 /* 129 * Without NOR FLASH we need this 130 */ 131 #define CONFIG_SYS_NO_FLASH 132 #undef CONFIG_CMD_FLASH 133 #undef CONFIG_CMD_IMLS 134 135 /* 136 * NAND Flash configuration 137 */ 138 #define CONFIG_SYS_MAX_NAND_DEVICE 1 139 140 #define BOOTFLASH_START 0x0 141 142 /* Kirkwood has two serial IF */ 143 #if (CONFIG_CONS_INDEX == 2) 144 #define CONFIG_KM_CONSOLE_TTY "ttyS1" 145 #else 146 #define CONFIG_KM_CONSOLE_TTY "ttyS0" 147 #endif 148 149 /* 150 * Other required minimal configurations 151 */ 152 #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ 153 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 154 #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ 155 #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ 156 #define CONFIG_NR_DRAM_BANKS 4 157 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 158 159 /* 160 * Ethernet Driver configuration 161 */ 162 #define CONFIG_NETCONSOLE /* include NetConsole support */ 163 #define CONFIG_MII /* expose smi ove miiphy interface */ 164 #define CONFIG_CMD_MII /* to debug mdio phy config */ 165 #define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ 166 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ 167 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 168 #define CONFIG_PHY_BASE_ADR 0 169 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 170 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */ 171 172 /* 173 * UBI related stuff 174 */ 175 #define CONFIG_SYS_USE_UBI 176 177 /* 178 * I2C related stuff 179 */ 180 #undef CONFIG_I2C_MVTWSI 181 #define CONFIG_SYS_I2C 182 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 183 #define CONFIG_SYS_I2C_INIT_BOARD 184 185 #define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ 186 #define CONFIG_SYS_NUM_I2C_BUSES 6 187 #define CONFIG_SYS_I2C_MAX_HOPS 1 188 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ 189 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ 190 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ 191 {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ 192 {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ 193 {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ 194 } 195 196 #ifndef __ASSEMBLY__ 197 #include <asm/arch-kirkwood/gpio.h> 198 extern void __set_direction(unsigned pin, int high); 199 void set_sda(int state); 200 void set_scl(int state); 201 int get_sda(void); 202 int get_scl(void); 203 #define KM_KIRKWOOD_SDA_PIN 8 204 #define KM_KIRKWOOD_SCL_PIN 9 205 #define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300 206 #define KM_KIRKWOOD_ENV_WP 38 207 208 #define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) 209 #define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) 210 #define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) 211 #define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) 212 #define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) 213 #endif 214 215 #define I2C_DELAY udelay(1) 216 #define I2C_SOFT_DECLARATIONS 217 218 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x0 219 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 220 221 /* EEprom support 24C128, 24C256 valid for environment eeprom */ 222 #define CONFIG_SYS_I2C_MULTI_EEPROMS 223 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE 224 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */ 225 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 226 227 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 228 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 229 230 /* 231 * Environment variables configurations 232 */ 233 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 234 #define CONFIG_ENV_IS_IN_SPI_FLASH /* use SPI-Flash for environment vars */ 235 #define CONFIG_ENV_OFFSET 0xc0000 /* no bracets! */ 236 #define CONFIG_ENV_SIZE 0x02000 /* Size of Environment */ 237 #define CONFIG_ENV_SECT_SIZE 0x10000 238 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 239 CONFIG_ENV_SECT_SIZE) 240 #define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ 241 #else 242 #define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ 243 #define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 244 #define CONFIG_ENV_EEPROM_IS_ON_I2C 245 #define CONFIG_SYS_EEPROM_WREN 246 #define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ 247 #define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) 248 #define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS 249 #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ 250 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 251 #endif 252 253 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 254 255 #define CONFIG_SPI_FLASH 256 #define CONFIG_SPI_FLASH_STMICRO 257 258 /* SPI bus claim MPP configuration */ 259 #define CONFIG_SYS_KW_SPI_MPP 0x0 260 261 #define FLASH_GPIO_PIN 0x00010000 262 #define KM_FLASH_GPIO_PIN 16 263 264 #ifndef MTDIDS_DEFAULT 265 # define MTDIDS_DEFAULT "nand0=orion_nand" 266 #endif /* MTDIDS_DEFAULT */ 267 268 #ifndef MTDPARTS_DEFAULT 269 # define MTDPARTS_DEFAULT "mtdparts=" \ 270 "orion_nand:" \ 271 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" 272 #endif /* MTDPARTS_DEFAULT */ 273 274 #define CONFIG_KM_UPDATE_UBOOT \ 275 "update=" \ 276 "sf probe 0;sf erase 0 +${filesize};" \ 277 "sf write ${load_addr_r} 0 ${filesize};\0" 278 279 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 280 #define CONFIG_KM_NEW_ENV \ 281 "newenv=sf probe 0;" \ 282 "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ 283 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" 284 #else 285 #define CONFIG_KM_NEW_ENV \ 286 "newenv=setenv addr 0x100000 && " \ 287 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \ 288 "mw.b ${addr} 0 4 && " \ 289 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ 290 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ 291 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ 292 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" 293 #endif 294 295 #ifndef CONFIG_KM_BOARD_EXTRA_ENV 296 #define CONFIG_KM_BOARD_EXTRA_ENV "" 297 #endif 298 299 /* 300 * Default environment variables 301 */ 302 #define CONFIG_EXTRA_ENV_SETTINGS \ 303 CONFIG_KM_BOARD_EXTRA_ENV \ 304 CONFIG_KM_DEF_ENV \ 305 CONFIG_KM_NEW_ENV \ 306 "arch=arm\0" \ 307 "" 308 309 #if defined(CONFIG_SYS_NO_FLASH) 310 #undef CONFIG_FLASH_CFI_MTD 311 #undef CONFIG_JFFS2_CMDLINE 312 #endif 313 314 /* additions for new relocation code, must be added to all boards */ 315 #define CONFIG_SYS_SDRAM_BASE 0x00000000 316 /* Do early setups now in board_init_f() */ 317 #define CONFIG_BOARD_EARLY_INIT_F 318 319 /* 320 * resereved pram area at the end of memroy [hex] 321 * 8Mbytes for switch + 4Kbytes for bootcount 322 */ 323 #define CONFIG_KM_RESERVED_PRAM 0x801000 324 /* address for the bootcount (taken from end of RAM) */ 325 #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) 326 /* Use generic bootcount RAM driver */ 327 #define CONFIG_BOOTCOUNT_RAM 328 329 /* enable POST tests */ 330 #define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) 331 #define CONFIG_POST_SKIP_ENV_FLAGS 332 #define CONFIG_POST_EXTERNAL_WORD_FUNCS 333 #define CONFIG_CMD_DIAG 334 335 /* we do the whole PCIe FPGA config stuff here */ 336 #define CONFIG_BOARD_LATE_INIT 337 338 #endif /* _CONFIG_KM_ARM_H */ 339