1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2010-2011 10 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 /* 16 * for linking errors see 17 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html 18 */ 19 20 #ifndef _CONFIG_KM_ARM_H 21 #define _CONFIG_KM_ARM_H 22 23 /* We got removed from Linux mach-types.h */ 24 #define MACH_TYPE_KM_KIRKWOOD 2255 25 26 /* 27 * High Level Configuration Options (easy to change) 28 */ 29 #define CONFIG_MARVELL 30 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 31 #define CONFIG_KIRKWOOD /* SOC Family Name */ 32 #define CONFIG_KW88F6281 /* SOC Name */ 33 #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ 34 35 #define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD 36 37 #define CONFIG_NAND_ECC_BCH 38 #define CONFIG_BCH 39 40 /* include common defines/options for all Keymile boards */ 41 #include "keymile-common.h" 42 43 #define CONFIG_CMD_NAND 44 #define CONFIG_CMD_SF 45 46 /* SPI NOR Flash default params, used by sf commands */ 47 #define CONFIG_SF_DEFAULT_SPEED 8100000 48 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 49 50 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 51 #define CONFIG_ENV_SPI_BUS 0 52 #define CONFIG_ENV_SPI_CS 0 53 #define CONFIG_ENV_SPI_MAX_HZ 8100000 54 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 55 #endif 56 57 /* Reserve 4 MB for malloc */ 58 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 59 60 #include "asm/arch/config.h" 61 62 #define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */ 63 #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ 64 #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ 65 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 66 67 /* pseudo-non volatile RAM [hex] */ 68 #define CONFIG_KM_PNVRAM 0x80000 69 /* physical RAM MTD size [hex] */ 70 #define CONFIG_KM_PHRAM 0x17F000 71 72 #define CONFIG_KM_CRAMFS_ADDR 0x2400000 73 #define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */ 74 75 /* architecture specific default bootargs */ 76 #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ 77 "bootcountaddr=${bootcountaddr} ${mtdparts}" \ 78 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" 79 80 #define CONFIG_KM_DEF_ENV_CPU \ 81 "boot=bootm ${load_addr_r} - -\0" \ 82 "cramfsloadfdt=true\0" \ 83 "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \ 84 CONFIG_KM_UPDATE_UBOOT \ 85 "" 86 87 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 88 #define CONFIG_MISC_INIT_R 89 90 /* 91 * NS16550 Configuration 92 */ 93 #define CONFIG_SYS_NS16550 94 #define CONFIG_SYS_NS16550_SERIAL 95 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 96 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK 97 #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE 98 #define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE 99 100 /* 101 * Serial Port configuration 102 * The following definitions let you select what serial you want to use 103 * for your console driver. 104 */ 105 106 #define CONFIG_CONS_INDEX 1 /* Console on UART0 */ 107 108 /* 109 * For booting Linux, the board info and command line data 110 * have to be in the first 8 MB of memory, since this is 111 * the maximum mapped by the Linux kernel during initialization. 112 */ 113 #define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ 114 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 115 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 116 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 117 118 /* 119 * Commands configuration 120 */ 121 #define CONFIG_CMD_ELF 122 #define CONFIG_CMD_MTDPARTS 123 #define CONFIG_CMD_NFS 124 125 /* 126 * Without NOR FLASH we need this 127 */ 128 #define CONFIG_SYS_NO_FLASH 129 #undef CONFIG_CMD_FLASH 130 #undef CONFIG_CMD_IMLS 131 132 /* 133 * NAND Flash configuration 134 */ 135 #define CONFIG_SYS_MAX_NAND_DEVICE 1 136 137 #define BOOTFLASH_START 0x0 138 139 /* Kirkwood has two serial IF */ 140 #if (CONFIG_CONS_INDEX == 2) 141 #define CONFIG_KM_CONSOLE_TTY "ttyS1" 142 #else 143 #define CONFIG_KM_CONSOLE_TTY "ttyS0" 144 #endif 145 146 /* 147 * Other required minimal configurations 148 */ 149 #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ 150 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 151 #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ 152 #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ 153 #define CONFIG_NR_DRAM_BANKS 4 154 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 155 156 /* 157 * Ethernet Driver configuration 158 */ 159 #define CONFIG_NETCONSOLE /* include NetConsole support */ 160 #define CONFIG_MII /* expose smi ove miiphy interface */ 161 #define CONFIG_CMD_MII /* to debug mdio phy config */ 162 #define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ 163 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ 164 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 165 #define CONFIG_PHY_BASE_ADR 0 166 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 167 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */ 168 169 /* 170 * UBI related stuff 171 */ 172 #define CONFIG_SYS_USE_UBI 173 174 /* 175 * I2C related stuff 176 */ 177 #undef CONFIG_I2C_MVTWSI 178 #define CONFIG_SYS_I2C 179 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 180 #define CONFIG_SYS_I2C_INIT_BOARD 181 182 #define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ 183 #define CONFIG_SYS_NUM_I2C_BUSES 6 184 #define CONFIG_SYS_I2C_MAX_HOPS 1 185 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ 186 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ 187 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ 188 {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ 189 {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ 190 {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ 191 } 192 193 #ifndef __ASSEMBLY__ 194 #include <asm/arch-kirkwood/gpio.h> 195 extern void __set_direction(unsigned pin, int high); 196 void set_sda(int state); 197 void set_scl(int state); 198 int get_sda(void); 199 int get_scl(void); 200 #define KM_KIRKWOOD_SDA_PIN 8 201 #define KM_KIRKWOOD_SCL_PIN 9 202 #define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300 203 #define KM_KIRKWOOD_ENV_WP 38 204 205 #define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) 206 #define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) 207 #define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) 208 #define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) 209 #define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) 210 #endif 211 212 #define I2C_DELAY udelay(1) 213 #define I2C_SOFT_DECLARATIONS 214 215 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x0 216 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 217 218 /* EEprom support 24C128, 24C256 valid for environment eeprom */ 219 #define CONFIG_SYS_I2C_MULTI_EEPROMS 220 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE 221 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */ 222 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 223 224 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 225 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 226 227 /* 228 * Environment variables configurations 229 */ 230 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 231 #define CONFIG_ENV_IS_IN_SPI_FLASH /* use SPI-Flash for environment vars */ 232 #define CONFIG_ENV_OFFSET 0xc0000 /* no bracets! */ 233 #define CONFIG_ENV_SIZE 0x02000 /* Size of Environment */ 234 #define CONFIG_ENV_SECT_SIZE 0x10000 235 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 236 CONFIG_ENV_SECT_SIZE) 237 #define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ 238 #else 239 #define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ 240 #define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 241 #define CONFIG_ENV_EEPROM_IS_ON_I2C 242 #define CONFIG_SYS_EEPROM_WREN 243 #define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ 244 #define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) 245 #define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS 246 #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ 247 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 248 #endif 249 250 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 251 252 #define CONFIG_SPI_FLASH 253 #define CONFIG_SPI_FLASH_STMICRO 254 255 /* SPI bus claim MPP configuration */ 256 #define CONFIG_SYS_KW_SPI_MPP 0x0 257 258 #define FLASH_GPIO_PIN 0x00010000 259 #define KM_FLASH_GPIO_PIN 16 260 261 #ifndef MTDIDS_DEFAULT 262 # define MTDIDS_DEFAULT "nand0=orion_nand" 263 #endif /* MTDIDS_DEFAULT */ 264 265 #ifndef MTDPARTS_DEFAULT 266 # define MTDPARTS_DEFAULT "mtdparts=" \ 267 "orion_nand:" \ 268 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" 269 #endif /* MTDPARTS_DEFAULT */ 270 271 #define CONFIG_KM_UPDATE_UBOOT \ 272 "update=" \ 273 "sf probe 0;sf erase 0 +${filesize};" \ 274 "sf write ${load_addr_r} 0 ${filesize};\0" 275 276 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR 277 #define CONFIG_KM_NEW_ENV \ 278 "newenv=sf probe 0;" \ 279 "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ 280 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" 281 #else 282 #define CONFIG_KM_NEW_ENV \ 283 "newenv=setenv addr 0x100000 && " \ 284 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \ 285 "mw.b ${addr} 0 4 && " \ 286 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ 287 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ 288 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ 289 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" 290 #endif 291 292 /* 293 * Default environment variables 294 */ 295 #define CONFIG_EXTRA_ENV_SETTINGS \ 296 CONFIG_KM_DEF_ENV \ 297 CONFIG_KM_NEW_ENV \ 298 "arch=arm\0" \ 299 "" 300 301 #if defined(CONFIG_SYS_NO_FLASH) 302 #undef CONFIG_FLASH_CFI_MTD 303 #undef CONFIG_JFFS2_CMDLINE 304 #endif 305 306 /* additions for new relocation code, must be added to all boards */ 307 #define CONFIG_SYS_SDRAM_BASE 0x00000000 308 /* Do early setups now in board_init_f() */ 309 #define CONFIG_BOARD_EARLY_INIT_F 310 311 /* 312 * resereved pram area at the end of memroy [hex] 313 * 8Mbytes for switch + 4Kbytes for bootcount 314 */ 315 #define CONFIG_KM_RESERVED_PRAM 0x801000 316 /* address for the bootcount (taken from end of RAM) */ 317 #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) 318 /* Use generic bootcount RAM driver */ 319 #define CONFIG_BOOTCOUNT_RAM 320 321 /* enable POST tests */ 322 #define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) 323 #define CONFIG_POST_SKIP_ENV_FLAGS 324 #define CONFIG_POST_EXTERNAL_WORD_FUNCS 325 #define CONFIG_CMD_DIAG 326 327 /* we do the whole PCIe FPGA config stuff here */ 328 #define CONFIG_BOARD_LATE_INIT 329 330 #endif /* _CONFIG_KM_ARM_H */ 331