1 /* 2 * (C) Copyright 2010 3 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __CONFIG_KM83XX_H 9 #define __CONFIG_KM83XX_H 10 11 /* include common defines/options for all Keymile boards */ 12 #include "keymile-common.h" 13 #include "km-powerpc.h" 14 15 #define CONFIG_MISC_INIT_R 16 /* 17 * System Clock Setup 18 */ 19 #define CONFIG_83XX_CLKIN 66000000 20 #define CONFIG_SYS_CLK_FREQ 66000000 21 #define CONFIG_83XX_PCICLK 66000000 22 23 /* 24 * IMMR new address 25 */ 26 #define CONFIG_SYS_IMMR 0xE0000000 27 28 /* 29 * Bus Arbitration Configuration Register (ACR) 30 */ 31 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */ 32 #define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */ 33 #define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */ 34 #define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */ 35 36 /* 37 * DDR Setup 38 */ 39 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ 40 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 41 #define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */ 42 43 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 44 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ 45 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) 46 47 #define CFG_83XX_DDR_USES_CS0 48 49 /* 50 * Manually set up DDR parameters 51 */ 52 #define CONFIG_DDR_II 53 #define CONFIG_SYS_DDR_SIZE 2048 /* MB */ 54 55 /* 56 * The reserved memory 57 */ 58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 59 #define CONFIG_SYS_FLASH_BASE 0xF0000000 60 61 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 62 #define CONFIG_SYS_RAMBOOT 63 #endif 64 65 /* Reserve 768 kB for Mon */ 66 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 67 68 /* 69 * Initial RAM Base Address Setup 70 */ 71 #define CONFIG_SYS_INIT_RAM_LOCK 72 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 73 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ 74 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 75 GENERATED_GBL_DATA_SIZE) 76 77 /* 78 * Init Local Bus Memory Controller: 79 * 80 * Bank Bus Machine PortSz Size Device 81 * ---- --- ------- ------ ----- ------ 82 * 0 Local GPCM 16 bit 256MB FLASH 83 * 1 Local GPCM 8 bit 128MB GPIO/PIGGY 84 * 85 */ 86 /* 87 * FLASH on the Local Bus 88 */ 89 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 90 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 91 #define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ 92 #define CONFIG_SYS_FLASH_PROTECTION 93 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 94 95 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 96 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) 97 98 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ 99 BR_PS_16 | /* 16 bit port size */ \ 100 BR_MS_GPCM | /* MSEL = GPCM */ \ 101 BR_V) 102 103 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \ 104 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ 105 OR_GPCM_SCY_5 | \ 106 OR_GPCM_TRLX_SET | OR_GPCM_EAD) 107 108 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ 109 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ 110 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 111 112 /* 113 * PRIO1/PIGGY on the local bus CS1 114 */ 115 /* Window base at flash base */ 116 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE 117 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) 118 119 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ 120 BR_PS_8 | /* 8 bit port size */ \ 121 BR_MS_GPCM | /* MSEL = GPCM */ \ 122 BR_V) 123 #define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \ 124 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ 125 OR_GPCM_SCY_2 | \ 126 OR_GPCM_TRLX_SET | OR_GPCM_EAD) 127 128 /* 129 * Serial Port 130 */ 131 #define CONFIG_CONS_INDEX 1 132 #define CONFIG_SYS_NS16550_SERIAL 133 #define CONFIG_SYS_NS16550_REG_SIZE 1 134 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 135 136 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 137 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 138 139 /* 140 * QE UEC ethernet configuration 141 */ 142 #define CONFIG_UEC_ETH 143 #define CONFIG_ETHPRIME "UEC0" 144 145 #if !defined(CONFIG_MPC8309) 146 #define CONFIG_UEC_ETH1 /* GETH1 */ 147 #define UEC_VERBOSE_DEBUG 1 148 #endif 149 150 #ifdef CONFIG_UEC_ETH1 151 #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ 152 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ 153 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 154 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 155 #define CONFIG_SYS_UEC1_PHY_ADDR 0 156 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 157 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 158 #endif 159 160 /* 161 * Environment 162 */ 163 164 #ifndef CONFIG_SYS_RAMBOOT 165 #ifndef CONFIG_ENV_ADDR 166 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 167 CONFIG_SYS_MONITOR_LEN) 168 #endif 169 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 170 #ifndef CONFIG_ENV_OFFSET 171 #define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN) 172 #endif 173 174 /* Address and size of Redundant Environment Sector */ 175 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 176 CONFIG_ENV_SECT_SIZE) 177 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 178 179 #else /* CFG_SYS_RAMBOOT */ 180 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 181 #define CONFIG_ENV_SIZE 0x2000 182 #endif /* CFG_SYS_RAMBOOT */ 183 184 /* I2C */ 185 #define CONFIG_SYS_I2C 186 #define CONFIG_SYS_NUM_I2C_BUSES 4 187 #define CONFIG_SYS_I2C_MAX_HOPS 1 188 #define CONFIG_SYS_I2C_FSL 189 #define CONFIG_SYS_FSL_I2C_SPEED 200000 190 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 191 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 192 #define CONFIG_SYS_I2C_OFFSET 0x3000 193 #define CONFIG_SYS_FSL_I2C2_SPEED 200000 194 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 195 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 196 #define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ 197 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ 198 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ 199 {1, {I2C_NULL_HOP} } } 200 201 #define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/ 202 203 #if defined(CONFIG_CMD_NAND) 204 #define CONFIG_NAND_KMETER1 205 #define CONFIG_SYS_MAX_NAND_DEVICE 1 206 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE 207 #endif 208 209 /* 210 * For booting Linux, the board info and command line data 211 * have to be in the first 8 MB of memory, since this is 212 * the maximum mapped by the Linux kernel during initialization. 213 */ 214 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) 215 216 /* 217 * Core HID Setup 218 */ 219 #define CONFIG_SYS_HID0_INIT 0x000000000 220 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 221 HID0_ENABLE_INSTRUCTION_CACHE) 222 #define CONFIG_SYS_HID2 HID2_HBE 223 224 /* 225 * MMU Setup 226 */ 227 228 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 229 230 /* DDR: cache cacheable */ 231 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ 232 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 233 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ 234 BATU_VS | BATU_VP) 235 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 236 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 237 238 /* IMMRBAR & PCI IO: cache-inhibit and guarded */ 239 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ 240 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 241 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \ 242 | BATU_VP) 243 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 244 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 245 246 /* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ 247 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \ 248 BATL_MEMCOHERENCE) 249 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \ 250 BATU_VS | BATU_VP) 251 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \ 252 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 253 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 254 255 /* FLASH: icache cacheable, but dcache-inhibit and guarded */ 256 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ 257 BATL_MEMCOHERENCE) 258 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \ 259 BATU_VS | BATU_VP) 260 #define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ 261 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 262 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 263 264 /* Stack in dcache: cacheable, no memory coherence */ 265 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) 266 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ 267 BATU_VS | BATU_VP) 268 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 269 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 270 271 /* 272 * Internal Definitions 273 */ 274 #define BOOTFLASH_START 0xF0000000 275 276 #define CONFIG_KM_CONSOLE_TTY "ttyS0" 277 278 /* 279 * Environment Configuration 280 */ 281 #define CONFIG_ENV_OVERWRITE 282 #ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ 283 #define CONFIG_KM_DEF_ENV "km-common=empty\0" 284 #endif 285 286 #ifndef CONFIG_KM_DEF_ARCH 287 #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" 288 #endif 289 290 #define CONFIG_EXTRA_ENV_SETTINGS \ 291 CONFIG_KM_DEF_ENV \ 292 CONFIG_KM_DEF_ARCH \ 293 "newenv=" \ 294 "prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && " \ 295 "era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0" \ 296 "unlock=yes\0" \ 297 "" 298 299 #if defined(CONFIG_UEC_ETH) 300 #define CONFIG_HAS_ETH0 301 #endif 302 303 #endif /* __CONFIG_KM83XX_H */ 304