1 /* 2 * (C) Copyright 2008-2011 3 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __CONFIG_KEYMILE_H 9 #define __CONFIG_KEYMILE_H 10 11 #define CONFIG_BOOTCOUNT_LIMIT 12 13 /* 14 * Command line configuration. 15 */ 16 #include <config_cmd_default.h> 17 18 #define CONFIG_CMD_ASKENV 19 #define CONFIG_CMD_DHCP 20 #define CONFIG_CMD_DEFAULTENV_VARS 21 #define CONFIG_CMD_GREPENV 22 #define CONFIG_CMD_ECHO 23 #define CONFIG_CMD_IMMAP 24 #define CONFIG_CMD_MII 25 #define CONFIG_CMD_PING 26 #define CONFIG_CMD_EEPROM 27 #define CONFIG_CMD_I2C 28 #define CONFIG_CMD_JFFS2 29 #define CONFIG_CMD_MTDPARTS 30 #define CONFIG_CMD_SETEXPR 31 32 #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ 33 34 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ 35 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 36 37 /* 38 * Miscellaneous configurable options 39 */ 40 #define CONFIG_SYS_HUSH_PARSER 41 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 42 #if defined(CONFIG_CMD_KGDB) 43 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 44 #else 45 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 46 #endif 47 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 48 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 49 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 50 #define CONFIG_CMDLINE_EDITING 51 #define CONFIG_AUTO_COMPLETE 52 53 #define CONFIG_HUSH_INIT_VAR 54 55 #define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ 56 57 #define CONFIG_BAUDRATE 115200 58 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } 59 60 #define CONFIG_LOADS_ECHO 61 #define CONFIG_SYS_LOADS_BAUD_CHANGE 62 63 /* Support the IVM EEprom */ 64 #define CONFIG_SYS_IVM_EEPROM_ADR 0x50 65 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 66 #define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 67 68 #define CONFIG_SYS_FLASH_PROTECTION 69 70 /* 71 * BOOTP options 72 */ 73 #define CONFIG_BOOTP_BOOTFILESIZE 74 #define CONFIG_BOOTP_BOOTPATH 75 #define CONFIG_BOOTP_GATEWAY 76 #define CONFIG_BOOTP_HOSTNAME 77 78 /* UBI Support for all Keymile boards */ 79 #define CONFIG_CMD_UBI 80 #define CONFIG_RBTREE 81 #define CONFIG_MTD_PARTITIONS 82 #define CONFIG_MTD_DEVICE 83 #define CONFIG_MTD_CONCAT 84 85 #define CONFIG_CMD_CRAMFS 86 #define CONFIG_CRAMFS_CMDLINE 87 88 #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS 89 #define CONFIG_KM_DEF_ENV_BOOTPARAMS \ 90 "actual_bank=0\0" 91 #endif 92 93 #ifndef CONFIG_KM_DEF_NETDEV 94 #define CONFIG_KM_DEF_NETDEV \ 95 "netdev=eth0\0" 96 #endif 97 98 #ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT 99 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" 100 #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ 101 102 #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP 103 /* one flash chip only called boot */ 104 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ 105 # define CONFIG_KM_UBI_LINUX_MTD \ 106 "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT 107 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ 108 "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" 109 #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ 110 /* two flash chips called boot and app */ 111 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ 112 /* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ 113 # define CONFIG_KM_UBI_LINUX_MTD \ 114 "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \ 115 "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP 116 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ 117 "ubiattach=if test ${boot_bank} -eq 0; then; " \ 118 "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; " \ 119 "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0" 120 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */ 121 122 #ifdef CONFIG_NAND_ECC_BCH 123 #define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0" 124 #define CONFIG_KM_ECC_MODE " eccmode=bch" 125 #else 126 #define CONFIG_KM_UIMAGE_NAME "uImage\0" 127 #define CONFIG_KM_ECC_MODE 128 #endif 129 130 /* 131 * boottargets 132 * - set 'subbootcmds' 133 * - set 'bootcmd' and 'altbootcmd' 134 * available targets: 135 * - 'release': for a standalone system kernel/rootfs from flash 136 */ 137 #define CONFIG_KM_DEF_ENV_BOOTTARGETS \ 138 "subbootcmds=ubiattach ubicopy cramfsloadfdt cramfsloadkernel " \ 139 "flashargs add_default addpanic boot\0" \ 140 "develop=" \ 141 "tftp 200000 scripts/develop-${arch}.txt && " \ 142 "env import -t 200000 ${filesize} && " \ 143 "run setup_debug_env\0" \ 144 "ramfs=" \ 145 "tftp 200000 scripts/ramfs-${arch}.txt && " \ 146 "env import -t 200000 ${filesize} && " \ 147 "run setup_debug_env\0" \ 148 "" 149 150 /* 151 * bootargs 152 * - modify 'bootargs' 153 * 154 * - 'add_default': default bootargs common for all arm/ppc boards 155 * - 'addpanic': add kernel panic options 156 * - 'flashargs': defaults arguments for flash base boot 157 * 158 */ 159 #define CONFIG_KM_DEF_ENV_BOOTARGS \ 160 "add_default=" \ 161 "setenv bootargs ${bootargs} " \ 162 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 163 ":${hostname}:${netdev}:off:" \ 164 " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ 165 " mem=${kernelmem} init=${init}" \ 166 CONFIG_KM_ECC_MODE \ 167 " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\ 168 " " CONFIG_KM_UBI_LINUX_MTD " " \ 169 CONFIG_KM_DEF_BOOT_ARGS_CPU \ 170 "\0" \ 171 "addpanic=" \ 172 "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \ 173 "flashargs=" \ 174 "setenv bootargs " \ 175 "root=mtdblock:rootfs${boot_bank} " \ 176 "rootfstype=squashfs ro\0" \ 177 "" 178 179 /* 180 * flash_boot 181 * - commands for booting from flash 182 * 183 * - 'cramfsloadkernel': copy kernel from a cramfs to ram 184 * - 'ubiattach': attach ubi partition 185 * - 'ubicopy': copy ubi volume to ram 186 * - volume names: bootfs0, bootfs1, bootfs2, ... 187 * 188 * processor specific settings 189 * - 'cramfsloadfdt': copy fdt from a cramfs to ram 190 */ 191 #define CONFIG_KM_DEF_ENV_FLASH_BOOT \ 192 "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \ 193 "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \ 194 "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \ 195 " bootfs${boot_bank}\0" \ 196 "uimage=" CONFIG_KM_UIMAGE_NAME \ 197 CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI 198 199 /* 200 * constants 201 * - KM specific constants and commands 202 * 203 * - 'default': setup default environment 204 */ 205 #define CONFIG_KM_DEF_ENV_CONSTANTS \ 206 "backup_bank=0\0" \ 207 "release=run newenv; reset\0" \ 208 "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0" \ 209 "testbootcmd=setenv boot_bank ${test_bank}; " \ 210 "run ${subbootcmds}; reset\0" \ 211 "" 212 213 #ifndef CONFIG_KM_DEF_ENV 214 #define CONFIG_KM_DEF_ENV \ 215 CONFIG_KM_DEF_ENV_BOOTPARAMS \ 216 CONFIG_KM_DEF_NETDEV \ 217 CONFIG_KM_DEF_ENV_CPU \ 218 CONFIG_KM_DEF_ENV_BOOTTARGETS \ 219 CONFIG_KM_DEF_ENV_BOOTARGS \ 220 CONFIG_KM_DEF_ENV_FLASH_BOOT \ 221 CONFIG_KM_DEF_ENV_CONSTANTS \ 222 "altbootcmd=run bootcmd\0" \ 223 "bootcmd=km_checkbidhwk && " \ 224 "setenv bootcmd \'if km_checktestboot; then; " \ 225 "setenv boot_bank ${test_bank}; else; " \ 226 "setenv boot_bank ${actual_bank}; fi;" \ 227 "run ${subbootcmds}; reset\' && " \ 228 "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \ 229 "run ${subbootcmds}; reset\' && " \ 230 "saveenv && saveenv && boot\0" \ 231 "bootlimit=3\0" \ 232 "init=/sbin/init-overlay.sh\0" \ 233 "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0" \ 234 "load=tftpboot ${load_addr_r} ${u-boot}\0" \ 235 "mtdids=" MTDIDS_DEFAULT "\0" \ 236 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 237 "" 238 #endif /* CONFIG_KM_DEF_ENV */ 239 240 #define CONFIG_VERSION_VARIABLE /* include version env variable */ 241 242 #endif /* __CONFIG_KEYMILE_H */ 243