xref: /openbmc/u-boot/include/configs/k2g_evm.h (revision 2399e401)
1 /*
2  * Configuration header file for TI's k2g-evm
3  *
4  * (C) Copyright 2015
5  *     Texas Instruments Incorporated, <www.ti.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_K2G_EVM_H
11 #define __CONFIG_K2G_EVM_H
12 
13 /* Platform type */
14 #define CONFIG_SOC_K2G
15 
16 /* U-Boot general configuration */
17 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
18 	DEFAULT_MMC_TI_ARGS						\
19 	DEFAULT_PMMC_BOOT_ENV						\
20 	DEFAULT_FW_INITRAMFS_BOOT_ENV					\
21 	"boot=mmc\0"							\
22 	"console=ttyS0,115200n8\0"					\
23 	"bootpart=0:2\0"						\
24 	"bootdir=/boot\0"						\
25 	"rd_spec=-\0"							\
26 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
27 	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0"	\
28 	"name_fdt=keystone-k2g-evm.dtb\0"				\
29 	"name_mon=skern-k2g.bin\0"					\
30 	"name_ubi=k2g-evm-ubifs.ubi\0"					\
31 	"name_uboot=u-boot-spi-k2g-evm.gph\0"				\
32 	"init_mmc=run args_all args_mmc\0"				\
33 	"init_fw_rd_mmc=load mmc ${bootpart} ${rdaddr} "		\
34 		"${bootdir}/${name_fw_rd}; run set_rd_spec\0"		\
35 	"soc_variant=k2g\0"						\
36 	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
37 	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
38 		"${bootdir}/${name_kern}\0"				\
39 	"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
40 	"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
41 
42 #define CONFIG_BOOTCOMMAND						\
43 	"run envboot; "							\
44 	"run set_name_pmmc init_${boot} init_fw_rd_${boot} "		\
45 	"get_pmmc_${boot} run_pmmc get_mon_${boot} run_mon "		\
46 	"get_fdt_${boot} get_kern_${boot} run_kern"
47 
48 #include <configs/ti_armv7_keystone2.h>
49 
50 /* SPL SPI Loader Configuration */
51 #define CONFIG_SPL_TEXT_BASE		0x0c080000
52 
53 /* NAND Configuration */
54 #define CONFIG_SYS_NAND_PAGE_2K
55 
56 /* Network */
57 #define CONFIG_KSNET_NETCP_V1_5
58 #define CONFIG_KSNET_CPSW_NUM_PORTS	2
59 #define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
60 #define CONFIG_PHY_MICREL
61 #define PHY_ANEG_TIMEOUT	10000 /* PHY needs longer aneg time */
62 
63 #undef CONFIG_ENV_IS_IN_NAND
64 #define CONFIG_ENV_IS_IN_FAT
65 #define FAT_ENV_INTERFACE		"mmc"
66 #define FAT_ENV_DEVICE_AND_PART		"0:1"
67 #define FAT_ENV_FILE			"uboot.env"
68 
69 #define CONFIG_SF_DEFAULT_BUS		1
70 #define CONFIG_SF_DEFAULT_CS		0
71 
72 #ifndef CONFIG_SPL_BUILD
73 #define CONFIG_CADENCE_QSPI
74 #define CONFIG_CQSPI_REF_CLK 384000000
75 #define CONFIG_CQSPI_DECODER 0x0
76 #define CONFIG_BOUNCE_BUFFER
77 #endif
78 
79 #endif /* __CONFIG_K2G_EVM_H */
80