xref: /openbmc/u-boot/include/configs/ipam390.h (revision a818704b)
1 /*
2  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
3  * Based on:
4  * U-Boot:include/configs/da850evm.h
5  *
6  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
7  *
8  * Based on davinci_dvevm.h. Original Copyrights follow:
9  *
10  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #ifndef __CONFIG_H
16 #define __CONFIG_H
17 
18 /*
19  * Board
20  */
21 #define CONFIG_DRIVER_TI_EMAC
22 #define CONFIG_BARIX_IPAM390
23 
24 /*
25  * SoC Configuration
26  */
27 #define CONFIG_MACH_DAVINCI_DA850_EVM
28 #define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
29 #define CONFIG_SOC_DA850		/* TI DA850 SoC */
30 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
31 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
32 #define CONFIG_SYS_OSCIN_FREQ		24000000
33 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
34 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
35 #define CONFIG_SYS_TEXT_BASE		0xc1080000
36 
37 /*
38  * Memory Info
39  */
40 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
41 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
42 #define PHYS_SDRAM_1_SIZE	(128 << 20) /* SDRAM size 128MB */
43 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
44 
45 /* memtest start addr */
46 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
47 
48 /* memtest will be run on 16MB */
49 #define CONFIG_SYS_MEMTEST_END	(CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024)
50 
51 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
52 
53 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (	\
54 	DAVINCI_SYSCFG_SUSPSRC_TIMER0 |		\
55 	DAVINCI_SYSCFG_SUSPSRC_UART2 |		\
56 	DAVINCI_SYSCFG_SUSPSRC_UART0 |		\
57 	DAVINCI_SYSCFG_SUSPSRC_EMAC)
58 
59 /*
60  * PLL configuration
61  */
62 #define CONFIG_SYS_DV_CLKMODE          0
63 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
64 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
65 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
66 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
67 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
68 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
69 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
70 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
71 
72 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
73 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
74 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
75 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
76 
77 #define CONFIG_SYS_DA850_PLL0_PLLM     24
78 #define CONFIG_SYS_DA850_PLL1_PLLM     24
79 
80 /*
81  * DDR2 memory configuration
82  */
83 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
84 					DV_DDR_PHY_EXT_STRBEN | \
85 					(0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT))
86 #define CONFIG_SYS_DA850_DDR2_SDRCR	0x00000498
87 
88 #define CONFIG_SYS_DA850_DDR2_SDBCR2	0x00000004
89 #define CONFIG_SYS_DA850_DDR2_PBBPR	0x00000020
90 
91 #define CONFIG_SYS_DA850_DDR2_SDTIMR (		\
92 	(13 << DV_DDR_SDTMR1_RFC_SHIFT) |	\
93 	(2 << DV_DDR_SDTMR1_RP_SHIFT) |		\
94 	(2 << DV_DDR_SDTMR1_RCD_SHIFT) |	\
95 	(2 << DV_DDR_SDTMR1_WR_SHIFT) |		\
96 	(5 << DV_DDR_SDTMR1_RAS_SHIFT) |	\
97 	(8 << DV_DDR_SDTMR1_RC_SHIFT) |		\
98 	(1 << DV_DDR_SDTMR1_RRD_SHIFT) |	\
99 	(1 << DV_DDR_SDTMR1_WTR_SHIFT))
100 
101 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (		\
102 	(8 << DV_DDR_SDTMR2_RASMAX_SHIFT) |	\
103 	(2 << DV_DDR_SDTMR2_XP_SHIFT) |		\
104 	(0 << DV_DDR_SDTMR2_ODT_SHIFT) |	\
105 	(14 << DV_DDR_SDTMR2_XSNR_SHIFT) |	\
106 	(0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) |	\
107 	(1 << DV_DDR_SDTMR2_RTP_SHIFT) |	\
108 	(2 << DV_DDR_SDTMR2_CKE_SHIFT))
109 
110 #define CONFIG_SYS_DA850_DDR2_SDBCR (		\
111 	(1 << DV_DDR_SDCR_DDR2EN_SHIFT) |	\
112 	(1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) |	\
113 	(1 << DV_DDR_SDCR_DDREN_SHIFT) |	\
114 	(1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |	\
115 	(1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |	\
116 	(2 << DV_DDR_SDCR_CL_SHIFT) |	\
117 	(3 << DV_DDR_SDCR_IBANK_SHIFT) |	\
118 	(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
119 
120 #define CONFIG_SYS_DA850_CS3CFG	(DAVINCI_ABCR_WSETUP(1)	| \
121 				DAVINCI_ABCR_WSTROBE(2)	| \
122 				DAVINCI_ABCR_WHOLD(0)	| \
123 				DAVINCI_ABCR_RSETUP(1)	| \
124 				DAVINCI_ABCR_RSTROBE(2)	| \
125 				DAVINCI_ABCR_RHOLD(1)	| \
126 				DAVINCI_ABCR_TA(0)	| \
127 				DAVINCI_ABCR_ASIZE_8BIT)
128 
129 /*
130  * Serial Driver info
131  */
132 #define CONFIG_SYS_NS16550_SERIAL
133 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
134 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
135 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
136 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
137 
138 /*
139  * Flash & Environment
140  */
141 #define CONFIG_NAND_DAVINCI
142 #define CONFIG_ENV_OFFSET		0x0 /* Block 0--not used by bootcode */
143 #define CONFIG_ENV_SIZE			(128 << 10)
144 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
145 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
146 #define	CONFIG_SYS_NAND_PAGE_2K
147 #define CONFIG_SYS_NAND_CS		3
148 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
149 #define CONFIG_SYS_NAND_MASK_CLE		0x10
150 #define CONFIG_SYS_NAND_MASK_ALE		0x8
151 #undef CONFIG_SYS_NAND_HW_ECC
152 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
153 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
154 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
155 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
156 #define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
157 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
158 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
159 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x120000
160 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
161 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
162 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_DST - \
163 					CONFIG_SYS_NAND_U_BOOT_SIZE - \
164 					CONFIG_SYS_MALLOC_LEN -       \
165 					GENERATED_GBL_DATA_SIZE)
166 #define CONFIG_SYS_NAND_ECCPOS		{				\
167 			6,   7,  8,  9, 10,	11, 12, 13, 14, 15,	\
168 			22, 23, 24, 25, 26,	27, 28, 29, 30, 31,	\
169 			38, 39, 40, 41, 42,	43, 44, 45, 46, 47,	\
170 			54, 55, 56, 57, 58,	59, 60, 61, 62, 63}
171 #define CONFIG_SYS_NAND_PAGE_COUNT	64
172 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
173 #define CONFIG_SYS_NAND_ECCSIZE		512
174 #define CONFIG_SYS_NAND_ECCBYTES	10
175 #define CONFIG_SYS_NAND_OOBSIZE		64
176 #define CONFIG_SPL_NAND_BASE
177 #define CONFIG_SPL_NAND_DRIVERS
178 #define CONFIG_SPL_NAND_ECC
179 #define CONFIG_SPL_NAND_SIMPLE
180 #define CONFIG_SPL_NAND_LOAD
181 
182 /*
183  * Network & Ethernet Configuration
184  */
185 #ifdef CONFIG_DRIVER_TI_EMAC
186 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
187 #define CONFIG_BOOTP_DEFAULT
188 #define CONFIG_BOOTP_DNS
189 #define CONFIG_BOOTP_DNS2
190 #define CONFIG_BOOTP_SEND_HOSTNAME
191 #define CONFIG_NET_RETRY_COUNT	10
192 #endif
193 
194 /*
195  * U-Boot general configuration
196  */
197 #define CONFIG_MISC_INIT_R
198 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
199 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
200 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
201 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
202 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
203 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
204 #define CONFIG_AUTO_COMPLETE
205 #define CONFIG_CMDLINE_EDITING
206 #define CONFIG_SYS_LONGHELP
207 #define CONFIG_MX_CYCLIC
208 
209 /*
210  * Linux Information
211  */
212 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
213 #define CONFIG_HWCONFIG		/* enable hwconfig */
214 #define CONFIG_CMDLINE_TAG
215 #define CONFIG_REVISION_TAG
216 #define CONFIG_SETUP_MEMORY_TAGS
217 #define CONFIG_EXTRA_ENV_SETTINGS \
218 	"defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
219 		"root=/dev/mtdblock5 rw noinitrd " \
220 		"rootfstype=jffs2 noinitrd\0" \
221 	"hwconfig=dsp:wake=yes\0" \
222 	"bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
223 	"bootfile=uImage\0" \
224 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"	\
225 	"mtddevname=uboot-env\0" \
226 	"mtddevnum=0\0" \
227 	"mtdids=" MTDIDS_DEFAULT "\0"				\
228 	"mtdparts=" MTDPARTS_DEFAULT "\0"			\
229 	"u-boot=/tftpboot/ipam390/u-boot.ais\0"			\
230 	"upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
231 		"nand write c0000000 20000 ${filesize}\0"	\
232 	"setbootparms=nand read c0100000 200000 400000;"	\
233 		"run defbootargs addmtd;"			\
234 		"spl export atags c0100000;"			\
235 		"nand erase.part bootparms;"			\
236 		"nand write c0000100 180000 20000\0"		\
237 	"\0"
238 
239 /*
240  * U-Boot commands
241  */
242 #define CONFIG_CMD_SAVES
243 
244 #ifdef CONFIG_CMD_BDI
245 #define CONFIG_CLOCKS
246 #endif
247 
248 #ifndef CONFIG_DRIVER_TI_EMAC
249 #endif
250 
251 #define CONFIG_MTD_DEVICE
252 #define CONFIG_MTD_PARTITIONS
253 
254 #define MTDIDS_NAME_STR		"davinci_nand.0"
255 #define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
256 #define MTDPARTS_DEFAULT	"mtdparts=" MTDIDS_NAME_STR ":" \
257 					"128k(u-boot-env),"	\
258 					"1408k(u-boot),"	\
259 					"128k(bootparms),"	\
260 					"384k(factory-info),"	\
261 					"4M(kernel),"	\
262 					"-(rootfs)"
263 
264 /* defines for SPL */
265 #define CONFIG_SPL_FRAMEWORK
266 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
267 						CONFIG_SYS_MALLOC_LEN)
268 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
269 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
270 #define CONFIG_SPL_STACK	0x8001ff00
271 #define CONFIG_SPL_TEXT_BASE	0x80000000
272 #define CONFIG_SPL_MAX_SIZE	0x20000
273 #define CONFIG_SPL_MAX_FOOTPRINT	32768
274 
275 /* additions for new relocation code, must added to all boards */
276 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
277 
278 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
279 					GENERATED_GBL_DATA_SIZE)
280 
281 /* add FALCON boot mode */
282 #define CONFIG_CMD_SPL
283 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000
284 #define CONFIG_SYS_SPL_ARGS_ADDR	LINUX_BOOT_PARAM_ADDR
285 #define CONFIG_CMD_SPL_NAND_OFS		0x00180000
286 #define CONFIG_CMD_SPL_WRITE_SIZE	0x400
287 
288 /* GPIO support */
289 #define CONFIG_DA8XX_GPIO
290 #define CONFIG_IPAM390_GPIO_BOOTMODE	((16 * 7) + 14)
291 
292 #define CONFIG_SHOW_BOOT_PROGRESS
293 #define CONFIG_IPAM390_GPIO_LED_RED	((16 * 7) + 11)
294 #define CONFIG_IPAM390_GPIO_LED_GREEN	((16 * 7) + 12)
295 
296 #include <asm/arch/hardware.h>
297 
298 #endif /* __CONFIG_H */
299