1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Compact Integrator board. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 #include "integrator-common.h" 19 20 /* Integrator CP-specific configuration */ 21 #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ 22 23 /* 24 * Hardware drivers 25 */ 26 #define CONFIG_SMC91111 27 #define CONFIG_SMC_USE_32_BIT 28 #define CONFIG_SMC91111_BASE 0xC8000000 29 #undef CONFIG_SMC91111_EXT_PHY 30 31 /* 32 * Command line configuration. 33 */ 34 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" 35 #define CONFIG_SERVERIP 192.168.1.100 36 #define CONFIG_IPADDR 192.168.1.104 37 #define CONFIG_BOOTFILE "uImage" 38 39 /* 40 * Miscellaneous configurable options 41 */ 42 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 43 #define CONFIG_SYS_MAX_FLASH_SECT 64 44 #define CONFIG_SYS_MONITOR_LEN 0x00100000 45 46 /* 47 * Move up the U-Boot & monitor area if more flash is fitted. 48 * If this U-Boot is to be run on Integrators with varying flash sizes, 49 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG 50 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE 51 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not 52 * embedded in the boot monitor(s) area 53 */ 54 #if ( PHYS_FLASH_SIZE == 0x04000000 ) 55 56 #define CONFIG_ENV_ADDR 0x27F00000 57 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 58 59 #elif (PHYS_FLASH_SIZE == 0x02000000 ) 60 61 #define CONFIG_ENV_ADDR 0x25F00000 62 #define CONFIG_SYS_MONITOR_BASE 0x25F40000 63 64 #else 65 66 #define CONFIG_ENV_ADDR 0x24F00000 67 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 68 69 #endif 70 71 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ 72 #define CONFIG_ENV_SIZE 8192 /* 8KB */ 73 74 #endif /* __CONFIG_H */ 75