1 /*
2  * (C) Copyright 2003
3  * Texas Instruments.
4  * Kshitij Gupta <kshitij@ti.com>
5  * Configuation settings for the TI OMAP Innovator board.
6  *
7  * (C) Copyright 2004
8  * ARM Ltd.
9  * Philippe Robin, <philippe.robin@arm.com>
10  * Configuration for Compact Integrator board.
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #ifndef __CONFIG_H
16 #define __CONFIG_H
17 
18 #include "integrator-common.h"
19 
20 /* Integrator CP-specific configuration */
21 #define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
22 
23 /*
24  * Hardware drivers
25  */
26 #define CONFIG_SMC91111
27 #define CONFIG_SMC_USE_32_BIT
28 #define CONFIG_SMC91111_BASE    0xC8000000
29 #undef CONFIG_SMC91111_EXT_PHY
30 
31 /* PL011 configuration */
32 #define CONFIG_PL011_SERIAL
33 #define CONFIG_PL011_CLOCK	14745600
34 #define CONFIG_PL01x_PORTS	{ (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
35 #define CONFIG_CONS_INDEX	0
36 #define CONFIG_BAUDRATE		38400
37 #define CONFIG_SYS_SERIAL0		0x16000000
38 #define CONFIG_SYS_SERIAL1		0x17000000
39 
40 /*
41  * Command line configuration.
42  */
43 #include <config_cmd_default.h>
44 
45 #define CONFIG_BOOTDELAY	2
46 #define CONFIG_BOOTARGS	"root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
47 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
48 #define CONFIG_SERVERIP 192.168.1.100
49 #define CONFIG_IPADDR 192.168.1.104
50 #define CONFIG_BOOTFILE "uImage"
51 
52 /*
53  * Miscellaneous configurable options
54  */
55 #define CONFIG_SYS_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
56 
57 #define PHYS_FLASH_SIZE			0x01000000	/* 16MB */
58 #define CONFIG_SYS_MAX_FLASH_SECT	64
59 #define CONFIG_ENV_IS_IN_FLASH	1
60 #define CONFIG_SYS_MONITOR_LEN		0x00100000
61 
62 /*
63  * Move up the U-Boot & monitor area if more flash is fitted.
64  * If this U-Boot is to be run on Integrators with varying flash sizes,
65  * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
66  * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
67  * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
68  * embedded in the boot monitor(s) area
69  */
70 #if ( PHYS_FLASH_SIZE == 0x04000000 )
71 
72 #define CONFIG_ENV_ADDR		0x27F00000
73 #define CONFIG_SYS_MONITOR_BASE	0x27F40000
74 
75 #elif (PHYS_FLASH_SIZE == 0x02000000 )
76 
77 #define CONFIG_ENV_ADDR		0x25F00000
78 #define CONFIG_SYS_MONITOR_BASE	0x25F40000
79 
80 #else
81 
82 #define CONFIG_ENV_ADDR		0x24F00000
83 #define CONFIG_SYS_MONITOR_BASE	0x27F40000
84 
85 #endif
86 
87 #define CONFIG_ENV_SECT_SIZE	0x40000		/* 256KB */
88 #define CONFIG_ENV_SIZE		8192		/* 8KB */
89 
90 #endif /* __CONFIG_H */
91