1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Compact Integrator board. 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 #include "integrator-common.h" 19 20 /* Integrator CP-specific configuration */ 21 #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ 22 23 /* 24 * Hardware drivers 25 */ 26 #define CONFIG_SMC91111 27 #define CONFIG_SMC_USE_32_BIT 28 #define CONFIG_SMC91111_BASE 0xC8000000 29 #undef CONFIG_SMC91111_EXT_PHY 30 31 /* PL011 configuration */ 32 #define CONFIG_PL011_SERIAL 33 #define CONFIG_PL011_CLOCK 14745600 34 #define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 } 35 #define CONFIG_CONS_INDEX 0 36 #define CONFIG_BAUDRATE 38400 37 #define CONFIG_SYS_SERIAL0 0x16000000 38 #define CONFIG_SYS_SERIAL1 0x17000000 39 40 /* 41 * Command line configuration. 42 */ 43 #define CONFIG_BOOTDELAY 2 44 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" 45 #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" 46 #define CONFIG_SERVERIP 192.168.1.100 47 #define CONFIG_IPADDR 192.168.1.104 48 #define CONFIG_BOOTFILE "uImage" 49 50 /* 51 * Miscellaneous configurable options 52 */ 53 #define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */ 54 55 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 56 #define CONFIG_SYS_MAX_FLASH_SECT 64 57 #define CONFIG_ENV_IS_IN_FLASH 1 58 #define CONFIG_SYS_MONITOR_LEN 0x00100000 59 60 /* 61 * Move up the U-Boot & monitor area if more flash is fitted. 62 * If this U-Boot is to be run on Integrators with varying flash sizes, 63 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG 64 * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE 65 * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not 66 * embedded in the boot monitor(s) area 67 */ 68 #if ( PHYS_FLASH_SIZE == 0x04000000 ) 69 70 #define CONFIG_ENV_ADDR 0x27F00000 71 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 72 73 #elif (PHYS_FLASH_SIZE == 0x02000000 ) 74 75 #define CONFIG_ENV_ADDR 0x25F00000 76 #define CONFIG_SYS_MONITOR_BASE 0x25F40000 77 78 #else 79 80 #define CONFIG_ENV_ADDR 0x24F00000 81 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 82 83 #endif 84 85 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ 86 #define CONFIG_ENV_SIZE 8192 /* 8KB */ 87 88 #endif /* __CONFIG_H */ 89