1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 #include "integrator-common.h" 19 20 /* Integrator/AP-specific configuration */ 21 #define CONFIG_ARCH_INTEGRATOR 22 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 23 24 /* 25 * PL010 Configuration 26 */ 27 #define CONFIG_PL010_SERIAL 28 #define CONFIG_CONS_INDEX 0 29 #define CONFIG_BAUDRATE 38400 30 #define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } 31 #define CONFIG_SYS_SERIAL0 0x16000000 32 #define CONFIG_SYS_SERIAL1 0x17000000 33 34 35 /* 36 * BOOTP options 37 */ 38 #define CONFIG_BOOTP_BOOTFILESIZE 39 #define CONFIG_BOOTP_BOOTPATH 40 #define CONFIG_BOOTP_GATEWAY 41 #define CONFIG_BOOTP_HOSTNAME 42 43 44 /* 45 * Command line configuration. 46 */ 47 #include <config_cmd_default.h> 48 49 #define CONFIG_BOOTDELAY 2 50 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" 51 #define CONFIG_BOOTCOMMAND "" 52 53 /* 54 * Miscellaneous configurable options 55 */ 56 #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ 57 58 /* Flash settings */ 59 #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ 60 #define CONFIG_SYS_MAX_FLASH_SECT 128 61 #define CONFIG_ENV_IS_NOWHERE 1 62 #define CONFIG_ENV_SIZE 32768 63 64 /*----------------------------------------------------------------------- 65 * PCI definitions 66 */ 67 68 #define CONFIG_PCI 69 #define CONFIG_CMD_PCI 70 #define CONFIG_PCI_PNP 71 72 #define CONFIG_NET_MULTI 73 #define CONFIG_TULIP 74 #define CONFIG_EEPRO100 75 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 76 77 78 /*----------------------------------------------------------------------- 79 * There are various dependencies on the core module (CM) fitted 80 * Users should refer to their CM user guide 81 * - when porting adjust u-boot/Makefile accordingly 82 * to define the necessary CONFIG_ s for the CM involved 83 * see e.g. integratorcp_CM926EJ-S_config 84 */ 85 #include "armcoremodule.h" 86 87 #endif /* __CONFIG_H */ 88