1 /*
2  * (C) Copyright 2003
3  * Texas Instruments.
4  * Kshitij Gupta <kshitij@ti.com>
5  * Configuation settings for the TI OMAP Innovator board.
6  *
7  * (C) Copyright 2004
8  * ARM Ltd.
9  * Philippe Robin, <philippe.robin@arm.com>
10  * Configuration for Integrator AP board.
11  *.
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #ifndef __CONFIG_H
16 #define __CONFIG_H
17 
18 #include "integrator-common.h"
19 
20 /* Integrator/AP-specific configuration */
21 #define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
22 
23 /*
24  * BOOTP options
25  */
26 #define CONFIG_BOOTP_BOOTFILESIZE
27 
28 /*
29  * Command line configuration.
30  */
31 #define CONFIG_BOOTCOMMAND	""
32 
33 /* Flash settings */
34 #define CONFIG_SYS_FLASH_SIZE		0x02000000 /* 32 MiB */
35 #define CONFIG_SYS_MAX_FLASH_SECT	128
36 #define CONFIG_ENV_SIZE			32768
37 
38 /*-----------------------------------------------------------------------
39  * PCI definitions
40  */
41 
42 #define CONFIG_TULIP
43 #define CONFIG_EEPRO100
44 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
45 
46 /*-----------------------------------------------------------------------
47  * There are various dependencies on the core module (CM) fitted
48  * Users should refer to their CM user guide
49  * - when porting adjust u-boot/Makefile accordingly
50  *   to define the necessary CONFIG_ s for the CM involved
51  * see e.g. integratorcp_CM926EJ-S_config
52  */
53 #include "armcoremodule.h"
54 
55 #endif	/* __CONFIG_H */
56