1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 #include "integrator-common.h" 19 20 /* Integrator/AP-specific configuration */ 21 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 22 23 /* 24 * BOOTP options 25 */ 26 #define CONFIG_BOOTP_BOOTFILESIZE 27 #define CONFIG_BOOTP_BOOTPATH 28 #define CONFIG_BOOTP_GATEWAY 29 #define CONFIG_BOOTP_HOSTNAME 30 31 /* 32 * Command line configuration. 33 */ 34 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" 35 #define CONFIG_BOOTCOMMAND "" 36 37 /* Flash settings */ 38 #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ 39 #define CONFIG_SYS_MAX_FLASH_SECT 128 40 #define CONFIG_ENV_SIZE 32768 41 42 /*----------------------------------------------------------------------- 43 * PCI definitions 44 */ 45 46 #define CONFIG_CMD_PCI 47 48 #define CONFIG_TULIP 49 #define CONFIG_EEPRO100 50 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 51 52 /*----------------------------------------------------------------------- 53 * There are various dependencies on the core module (CM) fitted 54 * Users should refer to their CM user guide 55 * - when porting adjust u-boot/Makefile accordingly 56 * to define the necessary CONFIG_ s for the CM involved 57 * see e.g. integratorcp_CM926EJ-S_config 58 */ 59 #include "armcoremodule.h" 60 61 #endif /* __CONFIG_H */ 62