1 /*
2  * (C) Copyright 2003
3  * Texas Instruments.
4  * Kshitij Gupta <kshitij@ti.com>
5  * Configuation settings for the TI OMAP Innovator board.
6  *
7  * (C) Copyright 2004
8  * ARM Ltd.
9  * Philippe Robin, <philippe.robin@arm.com>
10  * Configuration for Integrator AP board.
11  *.
12  * See file CREDITS for list of people who contributed to this
13  * project.
14  *
15  * This program is free software; you can redistribute it and/or
16  * modify it under the terms of the GNU General Public License as
17  * published by the Free Software Foundation; either version 2 of
18  * the License, or (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28  * MA 02111-1307 USA
29  */
30 
31 #ifndef __CONFIG_H
32 #define __CONFIG_H
33 
34 #include "integrator-common.h"
35 
36 /* Integrator/AP-specific configuration */
37 #define CONFIG_ARCH_INTEGRATOR
38 #define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
39 
40 /*
41  * PL010 Configuration
42  */
43 #define CONFIG_PL010_SERIAL
44 #define CONFIG_CONS_INDEX	0
45 #define CONFIG_BAUDRATE		38400
46 #define CONFIG_PL01x_PORTS	{ (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
47 #define CONFIG_SYS_SERIAL0		0x16000000
48 #define CONFIG_SYS_SERIAL1		0x17000000
49 
50 
51 /*
52  * BOOTP options
53  */
54 #define CONFIG_BOOTP_BOOTFILESIZE
55 #define CONFIG_BOOTP_BOOTPATH
56 #define CONFIG_BOOTP_GATEWAY
57 #define CONFIG_BOOTP_HOSTNAME
58 
59 
60 /*
61  * Command line configuration.
62  */
63 #include <config_cmd_default.h>
64 
65 #define CONFIG_BOOTDELAY	2
66 #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 console=ttyAM0 console=tty"
67 #define CONFIG_BOOTCOMMAND	""
68 
69 /*
70  * Miscellaneous configurable options
71  */
72 #define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
73 
74 #define CONFIG_SYS_FLASH_BASE	0x24000000
75 
76 /*-----------------------------------------------------------------------
77  * FLASH and environment organization
78  */
79 #define CONFIG_SYS_FLASH_CFI		1
80 #define CONFIG_FLASH_CFI_DRIVER		1
81 #define CONFIG_ENV_IS_NOWHERE
82 #define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
83 /* timeout values are in ticks */
84 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
85 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
86 #define CONFIG_SYS_MAX_FLASH_SECT	128
87 #define CONFIG_ENV_SIZE			32768
88 
89 
90 /*-----------------------------------------------------------------------
91  * PCI definitions
92  */
93 
94 #define CONFIG_PCI
95 #define CONFIG_CMD_PCI
96 #define CONFIG_PCI_PNP
97 
98 #define CONFIG_NET_MULTI
99 #define CONFIG_TULIP
100 #define CONFIG_EEPRO100
101 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
102 
103 
104 /*-----------------------------------------------------------------------
105  * There are various dependencies on the core module (CM) fitted
106  * Users should refer to their CM user guide
107  * - when porting adjust u-boot/Makefile accordingly
108  *   to define the necessary CONFIG_ s for the CM involved
109  * see e.g. integratorcp_CM926EJ-S_config
110  */
111 #include "armcoremodule.h"
112 
113 #endif	/* __CONFIG_H */
114