1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 #include "integrator-common.h" 19 20 /* Integrator/AP-specific configuration */ 21 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 22 23 /* 24 * PL010 Configuration 25 */ 26 #define CONFIG_PL010_SERIAL 27 #define CONFIG_CONS_INDEX 0 28 #define CONFIG_BAUDRATE 38400 29 #define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } 30 #define CONFIG_SYS_SERIAL0 0x16000000 31 #define CONFIG_SYS_SERIAL1 0x17000000 32 33 34 /* 35 * BOOTP options 36 */ 37 #define CONFIG_BOOTP_BOOTFILESIZE 38 #define CONFIG_BOOTP_BOOTPATH 39 #define CONFIG_BOOTP_GATEWAY 40 #define CONFIG_BOOTP_HOSTNAME 41 42 43 /* 44 * Command line configuration. 45 */ 46 #define CONFIG_BOOTDELAY 2 47 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" 48 #define CONFIG_BOOTCOMMAND "" 49 50 /* 51 * Miscellaneous configurable options 52 */ 53 #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ 54 55 /* Flash settings */ 56 #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ 57 #define CONFIG_SYS_MAX_FLASH_SECT 128 58 #define CONFIG_ENV_IS_NOWHERE 1 59 #define CONFIG_ENV_SIZE 32768 60 61 /*----------------------------------------------------------------------- 62 * PCI definitions 63 */ 64 65 #define CONFIG_PCI 66 #define CONFIG_CMD_PCI 67 #define CONFIG_PCI_PNP 68 69 #define CONFIG_TULIP 70 #define CONFIG_EEPRO100 71 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 72 73 74 /*----------------------------------------------------------------------- 75 * There are various dependencies on the core module (CM) fitted 76 * Users should refer to their CM user guide 77 * - when porting adjust u-boot/Makefile accordingly 78 * to define the necessary CONFIG_ s for the CM involved 79 * see e.g. integratorcp_CM926EJ-S_config 80 */ 81 #include "armcoremodule.h" 82 83 #endif /* __CONFIG_H */ 84