1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 */ 30 31 #ifndef __CONFIG_H 32 #define __CONFIG_H 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CFG_MEMTEST_START 0x100000 38 #define CFG_MEMTEST_END 0x10000000 39 #define CFG_HZ 1000 40 #define CFG_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 41 #define CFG_TIMERBASE 0x13000100 /* Timer1 */ 42 43 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 44 #define CONFIG_SETUP_MEMORY_TAGS 1 45 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ 46 47 #undef CONFIG_INIT_CRITICAL 48 #define CONFIG_CM_INIT 1 49 #define CONFIG_CM_REMAP 1 50 #undef CONFIG_CM_SPD_DETECT 51 52 /* 53 * Size of malloc() pool 54 */ 55 #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) 56 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 57 58 /* 59 * PL010 Configuration 60 */ 61 #define CFG_PL010_SERIAL 62 #define CONFIG_CONS_INDEX 0 63 #define CONFIG_BAUDRATE 38400 64 #define CONFIG_PL01x_PORTS { (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) } 65 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 66 #define CFG_SERIAL0 0x16000000 67 #define CFG_SERIAL1 0x17000000 68 69 /*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */ 70 /*#define CONFIG_NET_MULTI */ 71 /*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ 72 73 #define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) 74 75 76 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ 77 #include <cmd_confdefs.h> 78 79 #define CONFIG_BOOTDELAY 2 80 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" 81 #define CONFIG_BOOTCOMMAND "" 82 83 /* 84 * Miscellaneous configurable options 85 */ 86 #define CFG_LONGHELP /* undef to save memory */ 87 #define CFG_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ 88 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 89 /* Print Buffer Size */ 90 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) 91 #define CFG_MAXARGS 16 /* max number of command args */ 92 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 93 94 #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ 95 #define CFG_LOAD_ADDR 0x7fc0 /* default load address */ 96 97 /*----------------------------------------------------------------------- 98 * Stack sizes 99 * 100 * The stack sizes are set up in start.S using the settings below 101 */ 102 #define CONFIG_STACKSIZE (128*1024) /* regular stack */ 103 #ifdef CONFIG_USE_IRQ 104 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ 105 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ 106 #endif 107 108 /*----------------------------------------------------------------------- 109 * Physical Memory Map 110 */ 111 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 112 #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ 113 #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ 114 115 #define CFG_FLASH_BASE 0x24000000 116 117 /*----------------------------------------------------------------------- 118 * FLASH and environment organization 119 */ 120 #define CFG_ENV_IS_NOWHERE 121 #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 122 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 123 /* timeout values are in ticks */ 124 #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ 125 #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ 126 #define CFG_MAX_FLASH_SECT 128 127 #define CFG_ENV_SIZE 32768 128 129 #define PHYS_FLASH_1 (CFG_FLASH_BASE) 130 131 /*----------------------------------------------------------------------- 132 * PCI definitions 133 */ 134 135 /*#define CONFIG_PCI /--* include pci support */ 136 #undef CONFIG_PCI_PNP 137 #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ 138 #define DEBUG 139 140 #define CONFIG_EEPRO100 141 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 142 143 144 #define INTEGRATOR_BOOT_ROM_BASE 0x20000000 145 #define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 146 147 /* PCI Base area */ 148 #define INTEGRATOR_PCI_BASE 0x40000000 149 #define INTEGRATOR_PCI_SIZE 0x3FFFFFFF 150 151 /* memory map as seen by the CPU on the local bus */ 152 #define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */ 153 #define CPU_PCI_IO_SIZE 0x10000 154 155 #define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */ 156 #define CPU_PCI_CNFG_SIZE 0x1000000 157 158 #define PCI_MEM_BASE 0x40000000 /* 512M to xxx */ 159 /* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */ 160 #define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */ 161 /* unused (128-16)M from B1000000-B7FFFFFF */ 162 #define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ 163 /* unused ((128-16)M - 64K) from XXX */ 164 165 #define PCI_V3_BASE 0x62000000 166 167 /* V3 PCI bridge controller */ 168 #define V3_BASE 0x62000000 /* V360EPC registers */ 169 170 #define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS) 171 #define PCI_ENET0_MEMADDR (PCI_MEM_BASE) 172 173 174 #define V3_PCI_VENDOR 0x00000000 175 #define V3_PCI_DEVICE 0x00000002 176 #define V3_PCI_CMD 0x00000004 177 #define V3_PCI_STAT 0x00000006 178 #define V3_PCI_CC_REV 0x00000008 179 #define V3_PCI_HDR_CF 0x0000000C 180 #define V3_PCI_IO_BASE 0x00000010 181 #define V3_PCI_BASE0 0x00000014 182 #define V3_PCI_BASE1 0x00000018 183 #define V3_PCI_SUB_VENDOR 0x0000002C 184 #define V3_PCI_SUB_ID 0x0000002E 185 #define V3_PCI_ROM 0x00000030 186 #define V3_PCI_BPARAM 0x0000003C 187 #define V3_PCI_MAP0 0x00000040 188 #define V3_PCI_MAP1 0x00000044 189 #define V3_PCI_INT_STAT 0x00000048 190 #define V3_PCI_INT_CFG 0x0000004C 191 #define V3_LB_BASE0 0x00000054 192 #define V3_LB_BASE1 0x00000058 193 #define V3_LB_MAP0 0x0000005E 194 #define V3_LB_MAP1 0x00000062 195 #define V3_LB_BASE2 0x00000064 196 #define V3_LB_MAP2 0x00000066 197 #define V3_LB_SIZE 0x00000068 198 #define V3_LB_IO_BASE 0x0000006E 199 #define V3_FIFO_CFG 0x00000070 200 #define V3_FIFO_PRIORITY 0x00000072 201 #define V3_FIFO_STAT 0x00000074 202 #define V3_LB_ISTAT 0x00000076 203 #define V3_LB_IMASK 0x00000077 204 #define V3_SYSTEM 0x00000078 205 #define V3_LB_CFG 0x0000007A 206 #define V3_PCI_CFG 0x0000007C 207 #define V3_DMA_PCI_ADR0 0x00000080 208 #define V3_DMA_PCI_ADR1 0x00000090 209 #define V3_DMA_LOCAL_ADR0 0x00000084 210 #define V3_DMA_LOCAL_ADR1 0x00000094 211 #define V3_DMA_LENGTH0 0x00000088 212 #define V3_DMA_LENGTH1 0x00000098 213 #define V3_DMA_CSR0 0x0000008B 214 #define V3_DMA_CSR1 0x0000009B 215 #define V3_DMA_CTLB_ADR0 0x0000008C 216 #define V3_DMA_CTLB_ADR1 0x0000009C 217 #define V3_DMA_DELAY 0x000000E0 218 #define V3_MAIL_DATA 0x000000C0 219 #define V3_PCI_MAIL_IEWR 0x000000D0 220 #define V3_PCI_MAIL_IERD 0x000000D2 221 #define V3_LB_MAIL_IEWR 0x000000D4 222 #define V3_LB_MAIL_IERD 0x000000D6 223 #define V3_MAIL_WR_STAT 0x000000D8 224 #define V3_MAIL_RD_STAT 0x000000DA 225 #define V3_QBA_MAP 0x000000DC 226 227 /* SYSTEM register bits */ 228 #define V3_SYSTEM_M_RST_OUT (1 << 15) 229 #define V3_SYSTEM_M_LOCK (1 << 14) 230 231 /* PCI_CFG bits */ 232 #define V3_PCI_CFG_M_RETRY_EN (1 << 10) 233 #define V3_PCI_CFG_M_AD_LOW1 (1 << 9) 234 #define V3_PCI_CFG_M_AD_LOW0 (1 << 8) 235 236 /* PCI MAP register bits (PCI -> Local bus) */ 237 #define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 238 #define V3_PCI_MAP_M_RD_POST_INH (1 << 15) 239 #define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10) 240 #define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8) 241 #define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 242 #define V3_PCI_MAP_M_REG_EN (1 << 1) 243 #define V3_PCI_MAP_M_ENABLE (1 << 0) 244 245 /* 9 => 512M window size */ 246 #define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090 247 248 /* A => 1024M window size */ 249 #define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0 250 251 /* LB_BASE register bits (Local bus -> PCI) */ 252 #define V3_LB_BASE_M_MAP_ADR 0xFFF00000 253 #define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9) 254 #define V3_LB_BASE_M_ADR_SIZE 0x000000F0 255 #define V3_LB_BASE_M_PREFETCH (1 << 3) 256 #define V3_LB_BASE_M_ENABLE (1 << 0) 257 258 /* PCI COMMAND REGISTER bits */ 259 #define V3_COMMAND_M_FBB_EN (1 << 9) 260 #define V3_COMMAND_M_SERR_EN (1 << 8) 261 #define V3_COMMAND_M_PAR_EN (1 << 6) 262 #define V3_COMMAND_M_MASTER_EN (1 << 2) 263 #define V3_COMMAND_M_MEM_EN (1 << 1) 264 #define V3_COMMAND_M_IO_EN (1 << 0) 265 266 #define INTEGRATOR_SC_BASE 0x11000000 267 #define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 268 #define INTEGRATOR_SC_PCIENABLE \ 269 (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET) 270 271 /*----------------------------------------------------------------------- 272 * There are various dependencies on the core module (CM) fitted 273 * Users should refer to their CM user guide 274 * - when porting adjust u-boot/Makefile accordingly 275 * to define the necessary CONFIG_ s for the CM involved 276 * see e.g. integratorcp_CM926EJ-S_config 277 */ 278 279 #define CM_BASE 0x10000000 280 281 /* CM registers common to all integrator/CP CMs */ 282 #define OS_CTRL 0x0000000C 283 #define CMMASK_REMAP 0x00000005 /* Set remap & led */ 284 #define CMMASK_RESET 0x00000008 285 #define OS_LOCK 0x00000014 286 #define CMVAL_LOCK 0x0000A000 /* Locking value */ 287 #define CMMASK_LOCK 0x0000005F /* Locking value */ 288 #define CMVAL_UNLOCK 0x00000000 /* Any value != CM_LOCKVAL */ 289 #define OS_SDRAM 0x00000020 290 #define OS_INIT 0x00000024 291 #define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */ 292 #define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */ 293 #define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */ 294 295 #ifdef CONFIG_CM_SPD_DETECT 296 #define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */ 297 #endif 298 299 #if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E) 300 #define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual 301 * - PLL test clock bypassed 302 * - bus clock ratio 2 303 * - little endian 304 * - vectors at zero 305 */ 306 #endif /* CM1022xx */ 307 308 #define CMMASK_LE 0x00000008 /* little endian */ 309 #define CMMASK_CMxx6_COMMON 0x00000100 /* Common value for CMxx6 310 * - divisor/ratio b00000001 311 * bx 312 * - HCLKDIV b000 313 * bxx 314 * - PLL BYPASS b00 315 */ 316 #endif /* __CONFIG_H */ 317