1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 #include "integrator-common.h" 19 20 /* Integrator/AP-specific configuration */ 21 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 22 23 /* 24 * BOOTP options 25 */ 26 #define CONFIG_BOOTP_BOOTFILESIZE 27 #define CONFIG_BOOTP_BOOTPATH 28 #define CONFIG_BOOTP_GATEWAY 29 #define CONFIG_BOOTP_HOSTNAME 30 31 32 /* 33 * Command line configuration. 34 */ 35 #define CONFIG_BOOTDELAY 2 36 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" 37 #define CONFIG_BOOTCOMMAND "" 38 39 /* Flash settings */ 40 #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ 41 #define CONFIG_SYS_MAX_FLASH_SECT 128 42 #define CONFIG_ENV_IS_NOWHERE 1 43 #define CONFIG_ENV_SIZE 32768 44 45 /*----------------------------------------------------------------------- 46 * PCI definitions 47 */ 48 49 #define CONFIG_PCI 50 #define CONFIG_CMD_PCI 51 #define CONFIG_PCI_PNP 52 53 #define CONFIG_TULIP 54 #define CONFIG_EEPRO100 55 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 56 57 58 /*----------------------------------------------------------------------- 59 * There are various dependencies on the core module (CM) fitted 60 * Users should refer to their CM user guide 61 * - when porting adjust u-boot/Makefile accordingly 62 * to define the necessary CONFIG_ s for the CM involved 63 * see e.g. integratorcp_CM926EJ-S_config 64 */ 65 #include "armcoremodule.h" 66 67 #endif /* __CONFIG_H */ 68