1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 */ 30 31 #ifndef __CONFIG_H 32 #define __CONFIG_H 33 34 /* 35 * High Level Configuration Options 36 * (easy to change) 37 */ 38 #define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ 39 #define CONFIG_INTEGRATOR 1 /* in an Integrator board */ 40 #define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */ 41 42 43 #define CFG_MEMTEST_START 0x100000 44 #define CFG_MEMTEST_END 0x10000000 45 #define CFG_HZ (1000000 / 256) /* Timer 1 is clocked at 1Mhz, with 256 divider */ 46 #define CFG_TIMERBASE 0x13000100 47 48 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 49 #define CONFIG_SETUP_MEMORY_TAGS 1 50 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ 51 /* 52 * Size of malloc() pool 53 */ 54 #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) 55 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 56 57 /* 58 * PL010 Configuration 59 */ 60 #define CFG_PL010_SERIAL 61 #define CONFIG_CONS_INDEX 0 62 #define CONFIG_BAUDRATE 38400 63 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 64 #define CFG_SERIAL0 0x16000000 65 #define CFG_SERIAL1 0x17000000 66 67 /*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */ 68 /*#define CONFIG_NET_MULTI */ 69 /*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ 70 71 #define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) 72 73 74 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ 75 #include <cmd_confdefs.h> 76 77 #define CONFIG_BOOTDELAY 2 78 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" 79 #define CONFIG_BOOTCOMMAND "" 80 81 /* 82 * Miscellaneous configurable options 83 */ 84 #define CFG_LONGHELP /* undef to save memory */ 85 #define CFG_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ 86 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 87 /* Print Buffer Size */ 88 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) 89 #define CFG_MAXARGS 16 /* max number of command args */ 90 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 91 92 #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ 93 #define CFG_LOAD_ADDR 0x7fc0 /* default load address */ 94 95 /*----------------------------------------------------------------------- 96 * Stack sizes 97 * 98 * The stack sizes are set up in start.S using the settings below 99 */ 100 #define CONFIG_STACKSIZE (128*1024) /* regular stack */ 101 #ifdef CONFIG_USE_IRQ 102 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ 103 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ 104 #endif 105 106 /*----------------------------------------------------------------------- 107 * Physical Memory Map 108 */ 109 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 110 #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ 111 #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ 112 113 #define CFG_FLASH_BASE 0x24000000 114 115 /*----------------------------------------------------------------------- 116 * FLASH and environment organization 117 */ 118 #define CFG_ENV_IS_NOWHERE 119 #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 120 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ 121 /* timeout values are in ticks */ 122 #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ 123 #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ 124 #define CFG_MAX_FLASH_SECT 128 125 #define CFG_ENV_SIZE 32768 126 127 #define PHYS_FLASH_1 (CFG_FLASH_BASE) 128 129 /*----------------------------------------------------------------------- 130 * PCI definitions 131 */ 132 133 /*#define CONFIG_PCI /--* include pci support */ 134 #undef CONFIG_PCI_PNP 135 #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ 136 #define DEBUG 137 138 #define CONFIG_EEPRO100 139 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 140 141 142 #define INTEGRATOR_BOOT_ROM_BASE 0x20000000 143 #define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 144 145 /* PCI Base area */ 146 #define INTEGRATOR_PCI_BASE 0x40000000 147 #define INTEGRATOR_PCI_SIZE 0x3FFFFFFF 148 149 /* memory map as seen by the CPU on the local bus */ 150 #define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */ 151 #define CPU_PCI_IO_SIZE 0x10000 152 153 #define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */ 154 #define CPU_PCI_CNFG_SIZE 0x1000000 155 156 #define PCI_MEM_BASE 0x40000000 /* 512M to xxx */ 157 /* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */ 158 #define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */ 159 /* unused (128-16)M from B1000000-B7FFFFFF */ 160 #define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ 161 /* unused ((128-16)M - 64K) from XXX */ 162 163 #define PCI_V3_BASE 0x62000000 164 165 /* V3 PCI bridge controller */ 166 #define V3_BASE 0x62000000 /* V360EPC registers */ 167 168 #define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS) 169 #define PCI_ENET0_MEMADDR (PCI_MEM_BASE) 170 171 172 #define V3_PCI_VENDOR 0x00000000 173 #define V3_PCI_DEVICE 0x00000002 174 #define V3_PCI_CMD 0x00000004 175 #define V3_PCI_STAT 0x00000006 176 #define V3_PCI_CC_REV 0x00000008 177 #define V3_PCI_HDR_CF 0x0000000C 178 #define V3_PCI_IO_BASE 0x00000010 179 #define V3_PCI_BASE0 0x00000014 180 #define V3_PCI_BASE1 0x00000018 181 #define V3_PCI_SUB_VENDOR 0x0000002C 182 #define V3_PCI_SUB_ID 0x0000002E 183 #define V3_PCI_ROM 0x00000030 184 #define V3_PCI_BPARAM 0x0000003C 185 #define V3_PCI_MAP0 0x00000040 186 #define V3_PCI_MAP1 0x00000044 187 #define V3_PCI_INT_STAT 0x00000048 188 #define V3_PCI_INT_CFG 0x0000004C 189 #define V3_LB_BASE0 0x00000054 190 #define V3_LB_BASE1 0x00000058 191 #define V3_LB_MAP0 0x0000005E 192 #define V3_LB_MAP1 0x00000062 193 #define V3_LB_BASE2 0x00000064 194 #define V3_LB_MAP2 0x00000066 195 #define V3_LB_SIZE 0x00000068 196 #define V3_LB_IO_BASE 0x0000006E 197 #define V3_FIFO_CFG 0x00000070 198 #define V3_FIFO_PRIORITY 0x00000072 199 #define V3_FIFO_STAT 0x00000074 200 #define V3_LB_ISTAT 0x00000076 201 #define V3_LB_IMASK 0x00000077 202 #define V3_SYSTEM 0x00000078 203 #define V3_LB_CFG 0x0000007A 204 #define V3_PCI_CFG 0x0000007C 205 #define V3_DMA_PCI_ADR0 0x00000080 206 #define V3_DMA_PCI_ADR1 0x00000090 207 #define V3_DMA_LOCAL_ADR0 0x00000084 208 #define V3_DMA_LOCAL_ADR1 0x00000094 209 #define V3_DMA_LENGTH0 0x00000088 210 #define V3_DMA_LENGTH1 0x00000098 211 #define V3_DMA_CSR0 0x0000008B 212 #define V3_DMA_CSR1 0x0000009B 213 #define V3_DMA_CTLB_ADR0 0x0000008C 214 #define V3_DMA_CTLB_ADR1 0x0000009C 215 #define V3_DMA_DELAY 0x000000E0 216 #define V3_MAIL_DATA 0x000000C0 217 #define V3_PCI_MAIL_IEWR 0x000000D0 218 #define V3_PCI_MAIL_IERD 0x000000D2 219 #define V3_LB_MAIL_IEWR 0x000000D4 220 #define V3_LB_MAIL_IERD 0x000000D6 221 #define V3_MAIL_WR_STAT 0x000000D8 222 #define V3_MAIL_RD_STAT 0x000000DA 223 #define V3_QBA_MAP 0x000000DC 224 225 /* SYSTEM register bits */ 226 #define V3_SYSTEM_M_RST_OUT (1 << 15) 227 #define V3_SYSTEM_M_LOCK (1 << 14) 228 229 /* PCI_CFG bits */ 230 #define V3_PCI_CFG_M_RETRY_EN (1 << 10) 231 #define V3_PCI_CFG_M_AD_LOW1 (1 << 9) 232 #define V3_PCI_CFG_M_AD_LOW0 (1 << 8) 233 234 /* PCI MAP register bits (PCI -> Local bus) */ 235 #define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 236 #define V3_PCI_MAP_M_RD_POST_INH (1 << 15) 237 #define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10) 238 #define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8) 239 #define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 240 #define V3_PCI_MAP_M_REG_EN (1 << 1) 241 #define V3_PCI_MAP_M_ENABLE (1 << 0) 242 243 /* 9 => 512M window size */ 244 #define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090 245 246 /* A => 1024M window size */ 247 #define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0 248 249 /* LB_BASE register bits (Local bus -> PCI) */ 250 #define V3_LB_BASE_M_MAP_ADR 0xFFF00000 251 #define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9) 252 #define V3_LB_BASE_M_ADR_SIZE 0x000000F0 253 #define V3_LB_BASE_M_PREFETCH (1 << 3) 254 #define V3_LB_BASE_M_ENABLE (1 << 0) 255 256 /* PCI COMMAND REGISTER bits */ 257 #define V3_COMMAND_M_FBB_EN (1 << 9) 258 #define V3_COMMAND_M_SERR_EN (1 << 8) 259 #define V3_COMMAND_M_PAR_EN (1 << 6) 260 #define V3_COMMAND_M_MASTER_EN (1 << 2) 261 #define V3_COMMAND_M_MEM_EN (1 << 1) 262 #define V3_COMMAND_M_IO_EN (1 << 0) 263 264 #define INTEGRATOR_SC_BASE 0x11000000 265 #define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 266 #define INTEGRATOR_SC_PCIENABLE \ 267 (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET) 268 269 270 #endif /* __CONFIG_H */ 271