1 /* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 */ 30 31 #ifndef __CONFIG_H 32 #define __CONFIG_H 33 34 #include "integrator-common.h" 35 36 /* Integrator/AP-specific configuration */ 37 #define CONFIG_ARCH_INTEGRATOR 38 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 39 40 /* 41 * PL010 Configuration 42 */ 43 #define CONFIG_PL010_SERIAL 44 #define CONFIG_CONS_INDEX 0 45 #define CONFIG_BAUDRATE 38400 46 #define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } 47 #define CONFIG_SYS_SERIAL0 0x16000000 48 #define CONFIG_SYS_SERIAL1 0x17000000 49 50 51 /* 52 * BOOTP options 53 */ 54 #define CONFIG_BOOTP_BOOTFILESIZE 55 #define CONFIG_BOOTP_BOOTPATH 56 #define CONFIG_BOOTP_GATEWAY 57 #define CONFIG_BOOTP_HOSTNAME 58 59 60 /* 61 * Command line configuration. 62 */ 63 #include <config_cmd_default.h> 64 65 #define CONFIG_BOOTDELAY 2 66 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" 67 #define CONFIG_BOOTCOMMAND "" 68 69 /* 70 * Miscellaneous configurable options 71 */ 72 #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ 73 74 #define CONFIG_SYS_FLASH_BASE 0x24000000 75 76 /*----------------------------------------------------------------------- 77 * FLASH and environment organization 78 */ 79 #define CONFIG_SYS_FLASH_CFI 1 80 #define CONFIG_FLASH_CFI_DRIVER 1 81 #define CONFIG_ENV_IS_NOWHERE 82 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 83 /* timeout values are in ticks */ 84 #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ 85 #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ 86 #define CONFIG_SYS_MAX_FLASH_SECT 128 87 #define CONFIG_ENV_SIZE 32768 88 89 90 /*----------------------------------------------------------------------- 91 * PCI definitions 92 */ 93 94 #define CONFIG_PCI 95 #define CONFIG_CMD_PCI 96 #define CONFIG_PCI_PNP 97 98 #define CONFIG_NET_MULTI 99 #define CONFIG_TULIP 100 #define CONFIG_EEPRO100 101 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 102 103 104 /*----------------------------------------------------------------------- 105 * There are various dependencies on the core module (CM) fitted 106 * Users should refer to their CM user guide 107 * - when porting adjust u-boot/Makefile accordingly 108 * to define the necessary CONFIG_ s for the CM involved 109 * see e.g. integratorcp_CM926EJ-S_config 110 */ 111 #include "armcoremodule.h" 112 113 #endif /* __CONFIG_H */ 114