1 /*
2  * (C) Copyright 2003
3  * Texas Instruments.
4  * Kshitij Gupta <kshitij@ti.com>
5  * Configuation settings for the TI OMAP Innovator board.
6  *
7  * (C) Copyright 2004
8  * ARM Ltd.
9  * Philippe Robin, <philippe.robin@arm.com>
10  * Configuration for Integrator AP board.
11  *.
12  * See file CREDITS for list of people who contributed to this
13  * project.
14  *
15  * This program is free software; you can redistribute it and/or
16  * modify it under the terms of the GNU General Public License as
17  * published by the Free Software Foundation; either version 2 of
18  * the License, or (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28  * MA 02111-1307 USA
29  */
30 
31 #ifndef __CONFIG_H
32 #define __CONFIG_H
33 /*
34  * High Level Configuration Options
35  * (easy to change)
36  */
37 #define CONFIG_SYS_MEMTEST_START	0x100000
38 #define CONFIG_SYS_MEMTEST_END		0x10000000
39 #define CONFIG_SYS_HZ			1000
40 #define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
41 #define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1		       */
42 
43 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
44 #define CONFIG_SETUP_MEMORY_TAGS	1
45 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r during start up */
46 
47 #define CONFIG_SKIP_LOWLEVEL_INIT
48 #define CONFIG_CM_INIT		1
49 #define CONFIG_CM_REMAP		1
50 #undef CONFIG_CM_SPD_DETECT
51 
52 /*
53  * Size of malloc() pool
54  */
55 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
56 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
57 
58 /*
59  * PL010 Configuration
60  */
61 #define CONFIG_PL010_SERIAL
62 #define CONFIG_CONS_INDEX	0
63 #define CONFIG_BAUDRATE		38400
64 #define CONFIG_PL01x_PORTS	{ (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
65 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
66 #define CONFIG_SYS_SERIAL0		0x16000000
67 #define CONFIG_SYS_SERIAL1		0x17000000
68 
69 /*#define CONFIG_NET_MULTI */
70 
71 
72 /*
73  * BOOTP options
74  */
75 #define CONFIG_BOOTP_BOOTFILESIZE
76 #define CONFIG_BOOTP_BOOTPATH
77 #define CONFIG_BOOTP_GATEWAY
78 #define CONFIG_BOOTP_HOSTNAME
79 
80 
81 /*
82  * Command line configuration.
83  */
84 
85 #define CONFIG_CMD_IMI
86 #define CONFIG_CMD_BDI
87 #define CONFIG_CMD_MEMORY
88 
89 
90 #define CONFIG_BOOTDELAY	2
91 #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
92 #define CONFIG_BOOTCOMMAND	""
93 
94 /*
95  * Miscellaneous configurable options
96  */
97 #define CONFIG_SYS_LONGHELP	/* undef to save memory	    */
98 #define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
99 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
100 /* Print Buffer Size */
101 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
102 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
103 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
104 
105 #define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
106 
107 /*-----------------------------------------------------------------------
108  * Stack sizes
109  *
110  * The stack sizes are set up in start.S using the settings below
111  */
112 #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
113 #ifdef CONFIG_USE_IRQ
114 #define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
115 #define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
116 #endif
117 
118 /*-----------------------------------------------------------------------
119  * Physical Memory Map
120  */
121 #define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
122 #define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
123 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
124 
125 #define CONFIG_SYS_FLASH_BASE		0x24000000
126 
127 /*-----------------------------------------------------------------------
128  * FLASH and environment organization
129  */
130 #define CONFIG_ENV_IS_NOWHERE
131 #define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
132 #define PHYS_FLASH_SIZE		0x01000000	/* 16MB */
133 /* timeout values are in ticks */
134 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
135 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
136 #define CONFIG_SYS_MAX_FLASH_SECT	128
137 #define CONFIG_ENV_SIZE		32768
138 
139 #define PHYS_FLASH_1		(CONFIG_SYS_FLASH_BASE)
140 
141 /*-----------------------------------------------------------------------
142  * PCI definitions
143  */
144 
145 #ifdef CONFIG_PCI			/* pci support	*/
146 #undef CONFIG_PCI_PNP
147 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
148 #define DEBUG
149 
150 #define CONFIG_EEPRO100
151 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
152 
153 #define INTEGRATOR_BOOT_ROM_BASE	0x20000000
154 #define INTEGRATOR_HDR0_SDRAM_BASE	0x80000000
155 
156 /* PCI Base area */
157 #define INTEGRATOR_PCI_BASE		0x40000000
158 #define INTEGRATOR_PCI_SIZE		0x3FFFFFFF
159 
160 /* memory map as seen by the CPU on the local bus */
161 #define CPU_PCI_IO_ADRS		0x60000000	/* PCI I/O space base */
162 #define CPU_PCI_IO_SIZE		0x10000
163 
164 #define CPU_PCI_CNFG_ADRS	0x61000000	/* PCI config space */
165 #define CPU_PCI_CNFG_SIZE	0x1000000
166 
167 #define PCI_MEM_BASE		0x40000000   /* 512M to xxx */
168 /*  unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
169 #define INTEGRATOR_PCI_IO_BASE	0x60000000   /* 16M to xxx */
170 /*  unused (128-16)M from B1000000-B7FFFFFF */
171 #define PCI_CONFIG_BASE		0x61000000   /* 16M to xxx */
172 /*  unused ((128-16)M - 64K) from XXX */
173 
174 #define PCI_V3_BASE		0x62000000
175 
176 /* V3 PCI bridge controller */
177 #define V3_BASE			0x62000000    /* V360EPC registers */
178 
179 #define PCI_ENET0_IOADDR	(CPU_PCI_IO_ADRS)
180 #define PCI_ENET0_MEMADDR	(PCI_MEM_BASE)
181 
182 
183 #define V3_PCI_VENDOR		0x00000000
184 #define V3_PCI_DEVICE		0x00000002
185 #define V3_PCI_CMD		0x00000004
186 #define V3_PCI_STAT		0x00000006
187 #define V3_PCI_CC_REV		0x00000008
188 #define V3_PCI_HDR_CF		0x0000000C
189 #define V3_PCI_IO_BASE		0x00000010
190 #define V3_PCI_BASE0		0x00000014
191 #define V3_PCI_BASE1		0x00000018
192 #define V3_PCI_SUB_VENDOR	0x0000002C
193 #define V3_PCI_SUB_ID		0x0000002E
194 #define V3_PCI_ROM		0x00000030
195 #define V3_PCI_BPARAM		0x0000003C
196 #define V3_PCI_MAP0		0x00000040
197 #define V3_PCI_MAP1		0x00000044
198 #define V3_PCI_INT_STAT		0x00000048
199 #define V3_PCI_INT_CFG		0x0000004C
200 #define V3_LB_BASE0		0x00000054
201 #define V3_LB_BASE1		0x00000058
202 #define V3_LB_MAP0		0x0000005E
203 #define V3_LB_MAP1		0x00000062
204 #define V3_LB_BASE2		0x00000064
205 #define V3_LB_MAP2		0x00000066
206 #define V3_LB_SIZE		0x00000068
207 #define V3_LB_IO_BASE		0x0000006E
208 #define V3_FIFO_CFG		0x00000070
209 #define V3_FIFO_PRIORITY	0x00000072
210 #define V3_FIFO_STAT		0x00000074
211 #define V3_LB_ISTAT		0x00000076
212 #define V3_LB_IMASK		0x00000077
213 #define V3_SYSTEM		0x00000078
214 #define V3_LB_CFG		0x0000007A
215 #define V3_PCI_CFG		0x0000007C
216 #define V3_DMA_PCI_ADR0		0x00000080
217 #define V3_DMA_PCI_ADR1		0x00000090
218 #define V3_DMA_LOCAL_ADR0	0x00000084
219 #define V3_DMA_LOCAL_ADR1	0x00000094
220 #define V3_DMA_LENGTH0		0x00000088
221 #define V3_DMA_LENGTH1		0x00000098
222 #define V3_DMA_CSR0		0x0000008B
223 #define V3_DMA_CSR1		0x0000009B
224 #define V3_DMA_CTLB_ADR0	0x0000008C
225 #define V3_DMA_CTLB_ADR1	0x0000009C
226 #define V3_DMA_DELAY		0x000000E0
227 #define V3_MAIL_DATA		0x000000C0
228 #define V3_PCI_MAIL_IEWR	0x000000D0
229 #define V3_PCI_MAIL_IERD	0x000000D2
230 #define V3_LB_MAIL_IEWR		0x000000D4
231 #define V3_LB_MAIL_IERD		0x000000D6
232 #define V3_MAIL_WR_STAT		0x000000D8
233 #define V3_MAIL_RD_STAT		0x000000DA
234 #define V3_QBA_MAP		0x000000DC
235 
236 /* SYSTEM register bits */
237 #define V3_SYSTEM_M_RST_OUT		(1 << 15)
238 #define V3_SYSTEM_M_LOCK		(1 << 14)
239 
240 /*  PCI_CFG bits */
241 #define V3_PCI_CFG_M_RETRY_EN		(1 << 10)
242 #define V3_PCI_CFG_M_AD_LOW1		(1 << 9)
243 #define V3_PCI_CFG_M_AD_LOW0		(1 << 8)
244 
245 /* PCI MAP register bits (PCI -> Local bus) */
246 #define V3_PCI_MAP_M_MAP_ADR		0xFFF00000
247 #define V3_PCI_MAP_M_RD_POST_INH	(1 << 15)
248 #define V3_PCI_MAP_M_ROM_SIZE		(1 << 11 | 1 << 10)
249 #define V3_PCI_MAP_M_SWAP		(1 << 9 | 1 << 8)
250 #define V3_PCI_MAP_M_ADR_SIZE		0x000000F0
251 #define V3_PCI_MAP_M_REG_EN		(1 << 1)
252 #define V3_PCI_MAP_M_ENABLE		(1 << 0)
253 
254 /* 9 => 512M window size */
255 #define V3_PCI_MAP_M_ADR_SIZE_512M	0x00000090
256 
257 /* A => 1024M window size */
258 #define V3_PCI_MAP_M_ADR_SIZE_1024M	0x000000A0
259 
260 /* LB_BASE register bits (Local bus -> PCI) */
261 #define V3_LB_BASE_M_MAP_ADR		0xFFF00000
262 #define V3_LB_BASE_M_SWAP		(1 << 8 | 1 << 9)
263 #define V3_LB_BASE_M_ADR_SIZE		0x000000F0
264 #define V3_LB_BASE_M_PREFETCH		(1 << 3)
265 #define V3_LB_BASE_M_ENABLE		(1 << 0)
266 
267 /* PCI COMMAND REGISTER bits */
268 #define V3_COMMAND_M_FBB_EN		(1 << 9)
269 #define V3_COMMAND_M_SERR_EN		(1 << 8)
270 #define V3_COMMAND_M_PAR_EN		(1 << 6)
271 #define V3_COMMAND_M_MASTER_EN		(1 << 2)
272 #define V3_COMMAND_M_MEM_EN		(1 << 1)
273 #define V3_COMMAND_M_IO_EN		(1 << 0)
274 
275 #define INTEGRATOR_SC_BASE		0x11000000
276 #define INTEGRATOR_SC_PCIENABLE_OFFSET	0x18
277 #define INTEGRATOR_SC_PCIENABLE \
278 			(INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
279 
280 #endif /* CONFIG_PCI */
281 /*-----------------------------------------------------------------------
282  * There are various dependencies on the core module (CM) fitted
283  * Users should refer to their CM user guide
284  * - when porting adjust u-boot/Makefile accordingly
285  *   to define the necessary CONFIG_ s for the CM involved
286  * see e.g. integratorcp_CM926EJ-S_config
287  */
288 #include "armcoremodule.h"
289 
290 #endif	/* __CONFIG_H */
291