xref: /openbmc/u-boot/include/configs/imx6_spl.h (revision fea7f3aa)
1 /*
2  * Copyright (C) 2014 Gateworks Corporation
3  * Author: Tim Harvey <tharvey@gateworks.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 #ifndef __IMX6_SPL_CONFIG_H
8 #define __IMX6_SPL_CONFIG_H
9 
10 #ifdef CONFIG_SPL
11 
12 #define CONFIG_SPL_FRAMEWORK
13 
14 /*
15  * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
16  *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
17  *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
18  *  - BOOT ROM stack is at 0x0091FFB8
19  *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
20  *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
21  *    fit between 0x00907000 and 0x00918000.
22  *  - Additionally the BOOT ROM loads what they consider the firmware image
23  *    which consists of a 4K header in front of us that contains the IVT, DCD
24  *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
25  *    or 64KB
26  */
27 #define CONFIG_SYS_THUMB_BUILD
28 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
29 #define CONFIG_SPL_TEXT_BASE		0x00908000
30 #define CONFIG_SPL_MAX_SIZE		0x10000
31 #define CONFIG_SPL_STACK		0x0091FFB8
32 #define CONFIG_SPL_LIBCOMMON_SUPPORT
33 #define CONFIG_SPL_LIBGENERIC_SUPPORT
34 #define CONFIG_SPL_SERIAL_SUPPORT
35 #define CONFIG_SPL_I2C_SUPPORT
36 #define CONFIG_SPL_GPIO_SUPPORT
37 
38 /* NAND support */
39 #if defined(CONFIG_SPL_NAND_SUPPORT)
40 #define CONFIG_SPL_NAND_MXS
41 #define CONFIG_SPL_DMA_SUPPORT
42 #endif
43 
44 /* MMC support */
45 #if defined(CONFIG_SPL_MMC_SUPPORT)
46 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	138 /* offset 69KB */
47 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
48 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
49 #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
50 #endif
51 
52 /* SATA support */
53 #if defined(CONFIG_SPL_SATA_SUPPORT)
54 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
55 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
56 #endif
57 
58 /* Define the payload for FAT/EXT support */
59 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
60 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME  "u-boot.img"
61 #define CONFIG_SPL_LIBDISK_SUPPORT
62 #endif
63 
64 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
65 #define CONFIG_SPL_BSS_START_ADDR      0x88200000
66 #define CONFIG_SPL_BSS_MAX_SIZE        0x100000        /* 1 MB */
67 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
68 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x3200000       /* 50 MB */
69 #define CONFIG_SYS_TEXT_BASE           0x87800000
70 #else
71 #define CONFIG_SPL_BSS_START_ADDR	0x18200000
72 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
73 #define CONFIG_SYS_SPL_MALLOC_START	0x18300000
74 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3200000	/* 50 MB */
75 #define CONFIG_SYS_TEXT_BASE		0x17800000
76 #endif
77 #endif
78 
79 #endif
80