xref: /openbmc/u-boot/include/configs/imx6_spl.h (revision 193f6fb9)
1 /*
2  * Copyright (C) 2014 Gateworks Corporation
3  * Author: Tim Harvey <tharvey@gateworks.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 #ifndef __IMX6_SPL_CONFIG_H
8 #define __IMX6_SPL_CONFIG_H
9 
10 #ifdef CONFIG_SPL
11 
12 #define CONFIG_SPL_FRAMEWORK
13 
14 /*
15  * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
16  *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
17  *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
18  *  - BOOT ROM stack is at 0x0091FFB8
19  *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
20  *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
21  *    fit between 0x00907000 and 0x00918000.
22  *  - Additionally the BOOT ROM loads what they consider the firmware image
23  *    which consists of a 4K header in front of us that contains the IVT, DCD
24  *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
25  *    or 64KB
26  */
27 #define CONFIG_SPL_TEXT_BASE		0x00908000
28 #define CONFIG_SPL_MAX_SIZE		0x10000
29 #define CONFIG_SPL_STACK		0x0091FFB8
30 /*
31  * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
32  * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
33  * boot media (given that boot media specific offset is configured properly).
34  */
35 #define CONFIG_SPL_PAD_TO		0x11000
36 
37 /* MMC support */
38 #if defined(CONFIG_SPL_MMC_SUPPORT)
39 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
40 #define CONFIG_SYS_MONITOR_LEN			409600	/* 400 KB */
41 #endif
42 
43 /* SATA support */
44 #if defined(CONFIG_SPL_SATA_SUPPORT)
45 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
46 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
47 #endif
48 
49 /* Define the payload for FAT/EXT support */
50 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
51 # ifdef CONFIG_OF_CONTROL
52 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot-dtb.img"
53 # else
54 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
55 # endif
56 #endif
57 
58 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
59 	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
60 #define CONFIG_SPL_BSS_START_ADDR      0x88200000
61 #define CONFIG_SPL_BSS_MAX_SIZE        0x100000		/* 1 MB */
62 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
63 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000		/* 1 MB */
64 #define CONFIG_SYS_TEXT_BASE           0x87800000
65 #else
66 #define CONFIG_SPL_BSS_START_ADDR	0x18200000
67 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
68 #define CONFIG_SYS_SPL_MALLOC_START	0x18300000
69 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
70 #define CONFIG_SYS_TEXT_BASE		0x17800000
71 #endif
72 #endif
73 
74 #endif
75