1 /*
2  * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
3  *
4  * based on:
5  * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 
23 #ifndef __IMX27LITE_COMMON_CONFIG_H
24 #define __IMX27LITE_COMMON_CONFIG_H
25 
26 /*
27  * SoC Configuration
28  */
29 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
30 #define CONFIG_MX27
31 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
32 #define CONFIG_SYS_HZ		1000
33 
34 #define CONFIG_DISPLAY_BOARDINFO
35 #define CONFIG_DISPLAY_CPUINFO
36 
37 #define CONFIG_SYS_TEXT_BASE		0xc0000000
38 
39 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
40 #define CONFIG_SETUP_MEMORY_TAGS	1
41 #define CONFIG_INITRD_TAG		1
42 
43 /*
44  * Lowlevel configuration
45  */
46 #define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
47 		(ESDCFG_TRC(10) |	\
48 		ESDCFG_TRCD(3) |	\
49 		ESDCFG_TCAS(cas) |	\
50 		ESDCFG_TRRD(1) |	\
51 		ESDCFG_TRAS(5) |	\
52 		ESDCFG_TWR |		\
53 		ESDCFG_TMRD(2) |	\
54 		ESDCFG_TRP(2) |		\
55 		ESDCFG_TXP(3))
56 
57 #define SDRAM_ESDCTL_REGISTER_VAL	\
58 		(ESDCTL_PRCT(0) |	\
59 		 ESDCTL_BL |		\
60 		 ESDCTL_PWDT(0) |	\
61 		 ESDCTL_SREFR(3) |	\
62 		 ESDCTL_DSIZ_32 |	\
63 		 ESDCTL_COL10 |		\
64 		 ESDCTL_ROW13 |		\
65 		 ESDCTL_SDE)
66 
67 #define SDRAM_ALL_VAL		0xf00
68 
69 #define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
70 #define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
71 
72 #define MPCTL0_VAL	0x1ef15d5
73 
74 #define SPCTL0_VAL	0x043a1c09
75 
76 #define CSCR_VAL	0x33f08107
77 
78 #define PCDR0_VAL	0x120470c3
79 #define PCDR1_VAL	0x03030303
80 #define PCCR0_VAL	0xffffffff
81 #define PCCR1_VAL	0xfffffffc
82 
83 #define AIPI1_PSR0_VAL	0x20040304
84 #define AIPI1_PSR1_VAL	0xdffbfcfb
85 #define AIPI2_PSR0_VAL	0x07ffc200
86 #define AIPI2_PSR1_VAL	0xffffffff
87 
88 /*
89  * Memory Info
90  */
91 /* malloc() len */
92 #define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
93 /* memtest start address */
94 #define CONFIG_SYS_MEMTEST_START	0xA0000000
95 #define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
96 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
97 #define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
98 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
99 
100 /*
101  * Serial Driver info
102  */
103 #define CONFIG_MXC_UART
104 #define CONFIG_MXC_UART_BASE	UART1_BASE
105 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
106 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
107 
108 /*
109  * Flash & Environment
110  */
111 #define CONFIG_ENV_IS_IN_FLASH
112 #define CONFIG_FLASH_CFI_DRIVER
113 #define CONFIG_SYS_FLASH_CFI
114 /* Use buffered writes (~10x faster) */
115 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
116 /* Use hardware sector protection */
117 #define CONFIG_SYS_FLASH_PROTECTION		1
118 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
119 /* CS2 Base address */
120 #define PHYS_FLASH_1			0xc0000000
121 /* Flash Base for U-Boot */
122 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
123 #define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
124 		CONFIG_SYS_FLASH_SECT_SZ)
125 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
126 #define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
127 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
128 /* Address and size of Redundant Environment Sector	*/
129 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
130 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
131 
132 /*
133  * Ethernet
134  */
135 #define CONFIG_FEC_MXC
136 #define CONFIG_FEC_MXC_PHYADDR		0x1f
137 #define CONFIG_MII
138 
139 /*
140  * MTD
141  */
142 #define CONFIG_FLASH_CFI_MTD
143 #define CONFIG_MTD_DEVICE
144 
145 /*
146  * NAND
147  */
148 #define CONFIG_NAND_MXC
149 #define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
150 #define CONFIG_SYS_MAX_NAND_DEVICE	1
151 #define CONFIG_SYS_NAND_BASE		0xd8000000
152 #define CONFIG_JFFS2_NAND
153 #define CONFIG_MXC_NAND_HWECC
154 
155 /*
156  * SD/MMC
157  */
158 #define CONFIG_MMC
159 #define CONFIG_GENERIC_MMC
160 #define CONFIG_MXC_MMC
161 #define CONFIG_DOS_PARTITION
162 
163 /*
164  * GPIO
165  */
166 #define CONFIG_MXC_GPIO
167 
168 /*
169  * MTD partitions
170  */
171 #define CONFIG_CMD_MTDPARTS
172 
173 /*
174  * U-Boot general configuration
175  */
176 #define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
177 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
178 /* Print buffer sz */
179 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
180 		sizeof(CONFIG_SYS_PROMPT) + 16)
181 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
182 /* Boot Argument Buffer Size */
183 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
184 #define CONFIG_CMDLINE_EDITING
185 #define CONFIG_SYS_LONGHELP
186 
187 /*
188  * U-Boot commands
189  */
190 #include <config_cmd_default.h>
191 #define CONFIG_CMD_ASKENV
192 #define CONFIG_CMD_CACHE
193 #define CONFIG_CMD_DHCP
194 #define CONFIG_CMD_DIAG
195 #define CONFIG_CMD_FAT
196 #define CONFIG_CMD_JFFS2
197 #define CONFIG_CMD_MII
198 #define CONFIG_CMD_MMC
199 #define CONFIG_CMD_NAND
200 #define CONFIG_CMD_PING
201 
202 #define CONFIG_BOOTDELAY	5
203 
204 #define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
205 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
206 
207 #define	CONFIG_EXTRA_ENV_SETTINGS					\
208 	"netdev=eth0\0"							\
209 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
210 		"nfsroot=${serverip}:${rootpath}\0"			\
211 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
212 	"addip=setenv bootargs ${bootargs} "				\
213 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
214 		":${hostname}:${netdev}:off panic=1\0"			\
215 	"addtty=setenv bootargs ${bootargs}"				\
216 		" console=ttymxc0,${baudrate}\0"			\
217 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
218 	"addmisc=setenv bootargs ${bootargs}\0"				\
219 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
220 	"kernel_addr_r=a0800000\0"					\
221 	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
222 	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
223 	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
224 		"run nfsargs addip addtty addmtd addmisc;"		\
225 		"bootm\0"						\
226 	"bootcmd=run net_nfs\0"						\
227 	"load=tftp ${loadaddr} ${u-boot}\0"				\
228 	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
229 		" +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
230 		" +${filesize};cp.b ${fileaddr} "			\
231 		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"	\
232 	"upd=run load update\0"						\
233 	"mtdids=" MTDIDS_DEFAULT "\0"					\
234 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
235 
236 /* additions for new relocation code, must be added to all boards */
237 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
238 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
239 					GENERATED_GBL_DATA_SIZE)
240 #endif /* __IMX27LITE_COMMON_CONFIG_H */
241